4.54 chg-enumopts

Use this command to provision ENUM-specific data. This command updates the ENUMOPTS table.

Parameters

cngntfy (optional)
Congestion Notification Flag
Range:
Yes
Notify congestion to the sender
No
Silently discard the message
System Default:
no
cngrcode (optional)
RCODE values in ENUM error response message to be sent due to congestion on ENUM card.
Range:
6
ENUM_TOO_BUSY
7
ENUM_RESOURCES_EXCEEDED
System Default:
6
ENUM_TOO_BUSY
conglvl1 (optional)
ENUM application card congestion threshold level 1.
Range:
0-100
System Default:
40
conglvl2 (optional)
ENUM application card congestion threshold level 2.
Range:
0-100
System Default:
80
excludesp (optional)
SP Entity Id validity flag.
Range:
Yes
SP Entity Id is invalid as key for lookup in ENUM profile selection Table.
No
SP Entity Id is valid as key for lookup in ENUM profile selection Table.
System Default:
no
maxdndigs (optional)
Max number of DN digits from an incoming ENUM query.
Range:
5-15
System Default:
15
rncontext (optional)
Flag for RNCONTEXT Parameter in ENUM TEL URI.
Range:
Yes
Include the RNCONTEXT parameter in ENUM TEL URI.
No
Do not include the RNCONTEXT parameter in ENUM TEL URI.
System Default:
no
Incprefix (optional)
Flag to determine if PREFIX Parameter in ENUM PROFILE entries is to be used as RN in regex response for NAPTR queries for service type PSTN-SIP.
Range:
Yes
Include the PREFIX parameter as RN in NAPTR regex response.
No
Do not include the PREFIX parameter as RN in NAPTR regex response.
System Default:
No

Example

chg-enumopts:maxdndigs=10

chg-enumopts:conglvl1=50

chg-enumopts:conglvl2=10

chg-enumopts:cngntfy=yes

chg-enumopts:cngrcode=6

chg-enumopts:excludesp=yes

chg-enumopts:rncontext=yes

chg-enumopts:incprefix=yes

Dependencies

The ENUMOPTS table should be accessible.

Congestion level 1 must be less than congestion level 2.

Output

This example displays output when maxdndigs is specified:

>chg-enumopts:maxdndigs=10

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.1.0
    chg-enumopts:maxdndigs=10
    Command entered at terminal #4.
    CHG-ENUMOPTS: MASP A - COMPLTD
;
This example displays output when conglvl1 is specified:

>chg-enumopts:conglvl1=50

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.1.0
    chg-enumopts:conglvl1=50
    Command entered at terminal #4.
    CHG-ENUMOPTS: MASP A - COMPLTD
; 
This example displays output when conglvl2 is specified:

>chg-enumopts:conglvl2=90

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.1.0
    chg-enumopts:conglvl2=90
    Command entered at terminal #4.
    CHG-ENUMOPTS: MASP A - COMPLTD
; 
This example displays output when cngntfy is specified:

>chg-enumopts:cngntfy=yes

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.1.0
    chg-enumopts:cngntfy=yes
    Command entered at terminal #4.
    CHG-ENUMOPTS: MASP A - COMPLTD
; 
This example displays output when cngrcode is specified:

>chg-enumopts:cngrcode=6

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.1.0
    chg-enumopts:cngrcode=6
    Command entered at terminal #4.
    CHG-ENUMOPTS: MASP A - COMPLTD
; 
 
This example displays output when excludesp is specified:
>chg-enumopts:excludesp=yes

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.5.0
    chg-enumopts:excludesp=yes
    Command entered at terminal #4.
    CHG-ENUMOPTS: MASP A - COMPLTD
; 
This example displays output when rncontext is specified:
>chg-enumopts:rncontext=yes

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.5.0
    chg-enumopts:rncontext=yes
    Command entered at terminal #4.
    CHG-ENUMOPTS: MASP A - COMPLTD
; 

This example displays output when incprefix is specified:

> chg-enumopts:incprefix=yes
Command Accepted - Processing
    tekelecstp 19-05-03 16:53:17 MST  EAGLE 46.8.0.0.0-75.18.14
    chg-enumopts:incprefix=yes
    Command entered at terminal #4.
    tekelecstp 19-05-03 16:53:17 MST  EAGLE 46.8.0.0.0-75.18.14
    CHG-ENUMOPTS: MASP A - COMPLTD
;