4.73 chg-gttaset

Use this command to change Global Title Translation (GTT) Action Set data. A GTT Action Set consists of an Action Set name and a set of Action IDs. The specified Action IDs determine the actions that are applied to the MSU during translation. Action IDs are configured using the ent/chg/dlt-gttact commands.

Parameters

Note:

Definitions for the feature options specified by the on and off parameters are located in the Notes section.
actsn (mandatory)

GTT Action Set Name.

Range:
ayyyyyyyy

1 leading alphabetic character and up to 8 following alphanumeric characters

actid1 (optional)

GTT Action ID 1. The first Action ID associated with the GTT Action Set.

Range:
ayyyyyyyy

1 leading alphabetic character and up to 8 following alphanumeric characters

none—removes the Action ID from the GTT Action Set

actid2 (optional)

GTT Action ID 2. The second Action ID associated with the GTT Action Set.

Range:
ayyyyyyyy

1 leading alphabetic character and up to 8 following alphanumeric characters

none—removes the Action ID from the GTT Action Set

actid3 (optional)

GTT Action ID 3. The third Action ID associated with the GTT Action Set.

Range:
ayyyyyyyy

1 leading alphabetic character and up to 8 following alphanumeric characters

none—removes the Action ID from the GTT Action Set

actid4 (optional)

GTT Action ID 4. The fourth Action ID associated with the GTT Action set.

Range:
ayyyyyyyy

1 leading alphabetic character and up to 8 following alphanumeric characters

none—removes the Action ID from the GTT Action Set

actid5 (optional)

GTT Action ID 5. The fifth action ID associated with the GTT Action set.

Range:
ayyyyyyyy

1 leading alphabetic character and up to 8 following alphanumeric characters

none—removes the Action ID from the GTT Action Set

actid6 (optional)

GTT Action ID 6. The sixth Action ID associated with the GTT Action Set.

Range:
ayyyyyyyy

1 leading alphabetic character and up to 8 following alphanumeric characters

none—removes the Action ID from the GTT Action Set

nactsn (optional)

New GTT Action Set Name.

Range:
ayyyyyyyy

1 leading alphabetic character and up to 8 following alphanumeric characters

off (optional)

Disables or turns off the specified feature options. A comma-separated list of feature options that are requested to be turned off. Up to 8 feature options can be specified in the list.

Range:
testmode
on (optional)

Enables or turns on the specified feature options. A comma-separated list of feature options that are requested to be turned on. Up to 8 feature options can be specified in the list.

Range:
testmode

Example

Changing the GTT Action Set name:

chg-gttaset:actsn=asetdisc1:nactsn=asetdisc2

Removing Action ID1 and ID3 from an Action Set and changing ID2 to another ID in the GTT Action Set table:

chg-gttaset:actsn=asetdup1:actid1=none:actid2=disc1:actid3=none:off=testmode

chg-gttaset:actsn=asetfwd1:actid1=actfwd1:actid2=actdup1:on=testmode

chg-gttaset:actsn=asetsrvc1:actid1=actdup2:actid2=actsrvc2

Dependencies

The GTT Action table is corrupt or cannot be found.

The GTT Action Set table is corrupt or cannot be found.

The Action ID specified by the actid(X) parameter(s) must already exist in the GTT Action table.

The value specified for the nactsn parameter cannot already exist in the database.

The GTT Action Set name specified by the actsn  parameter must already exist in the GTT Action Set table.

A value of none cannot be specified for the (n)actsn parameter.

At least one Action ID in the Action Set must be associated with an action other than none or fallback.

Only one Action ID in an Action Set can be associated with an action of type disc, udts, tcaperr or srvc.

If an Action ID with an action of fwd is specified, then no other Action ID in the Action Set can be associated with an act of disc, udts, tcaperrsrvc, or fwd.

If an Action ID with an action of srvc is specified, then no other Action ID in the same Action Set can be associated with an act of fwd, disc, udts, tcaperr, or srvc.

If the Action Set contains five Action IDs with an action of dup then the remaining Action ID cannot have an action of dup

Action IDs associated with an action of disc, udts, tcaperr, srvc, or fwd must be the last actions in an Action Set.

Action IDs associated with an action of sfthrot must be the first action in an Action Set.

If the Action Set contains two Action IDs associated with an action of scpval, then the remaining action ID cannot be associated with an action of scpval.

One of the optional parameters must be specified.

The actid1/actid2/actid3/actid4/actid5/actid6 parameters must each specify a unique Action ID in the command.

The EGTT feature must be turned on before this command can be entered.

The same option(s) cannot be specified for the on and off parameters.

A maximum of two SCPVAL GTT actions are allowed in an action set. Both action sets should have a different combination of SPRM and TPRM.

Notes

on/off options

  • testmode—invokes a field-safe Test Tool used to debug the GTT Action Set rules

Output

chg-gttaset:actsn=asetdup1:actid1=dup2:on=testmode

    tekelecstp 10-02-04 18:29:41 EST  EAGLE 42.0.0
    chg-gttaset:actsn=asetdup1:actid1=dup2:on=testmode
    Command entered at terminal #4.

    GTT Action Set table is (2 of 20000) 1% full

    CHG-GTTASET: MASP A - COMPLTD 
;