4.72 chg-gttapath

Use this command to change a GTT Action path entry. A GTT Action path consists of pairs of "setname + value" for Opcode/CgGTA/CdGTA. Each "setname + value" pair must already be defined in the GTT translation table.

Parameters

gttpn (mandatory)
GTT Path name.
Range:
ayyyy

1 leading alphabetic character and up to 4 following alphanumeric characters.

acn (optional)
Application context name. The ITU TCAP ACN field in the incoming MSU.
Range:
0 - 255, * none

none—there is no ITU TCAP ACN field in the incoming MSU

cdgta (optional)
Called Party Global Title Address.
Range:
1-21 digits

If the Hex Digit Support for GTT feature is not enabled, the range is 1 - 21 decimal digits; valid digits are 0-9.

If the Hex Digit Support for GTT feature is enabled and on, the range is 1 - 21 hexadecimal digits; valid digits are 0-9, a-f, A-F.

cdgttsn (optional)
GTT set name (CDPA type).
Range:
ayyyyyyyy

1 leading alphabetic and up to 8 following alphanumeric characters.

cggta (optional)

Calling Party Global Title Address.

Range:
1-21 digits

If the Hex Digit Support for GTT feature is not enabled, the range is 1 - 21 decimal digits; valid digits are 0-9.

If the Hex Digit Support for GTT feature is enabled and on, the range is 1 - 21 hexadecimal digits; valid digits are 0-9, a-f, A-F.

cggttsn (optional)
GTT set name (CGPA type).
Range:
ayyyyyyyy

1 leading alphabetic and up to 8 following alphanumeric characters.

family (optional)
The ANSI TCAPFAMILY field in the incoming MSU.
Range:
0 - 255, *, none

none —there is no value in the ANSI TCAP FAMILY field in the incoming MSU

ngttpn (optional)
GTT Path name. The new GTT path name.
Range:
ayyyy

1 leading alphabetic character and up to 4 following alphanumeric characters.

opcode (optional)
The TCAP OPCODE field in the incoming MSU.
Range:
0 - 255, *, none

none —there is no value in the TCAP OPCODE field in the incoming MSU

opgttsn (optional)
GTT set name (Opcode type).
Range:
ayyyyyyyy

1 leading alphabetic and up to 8 following alphanumeric characters.

pkgtype (optional)
The ANSI and ITU TCAP package type.
Range:
ituuni
ITU unidirectional
qwp
Query with Permission
qwop
Query without Permission
resp
Response
cwp
Conversation with Permission
cwop
Conversation without Permission
any
Wildcard value
bgn
Begin
end
End
cnt
Continue
ituabort
ITU abort
ansiabort
ANSI abort
ansiuni
ANSI unidirectional
ANSI TCAP Package Types:
ansiuni, qwp, qwop, resp, cwp, cwop, ansiabort, any
ITU TCAP Package Types:
bgn, ituabort, ituuni, any, end, cnt

Example

chg-gttapath:gttpn=path1:opgttsn=opsn2:acn=1-1-1-1-1-1-1:opcode=123:pkgtype=ituuni

chg-gttapath:gttpn=path1:cggttsn=cgsn2:cggta=45673

chg-gttapath:gttpn=path1:ngttpn=path2

Dependencies

If the family parameter is specified, then a value of ansiuni, qwp, qwop, resp, cwp, cwop, ansiabort, or any must be specified for the pkgtype parameter.

If the acn parameter is specified, then a value of bgn, ituabort, ituuni, any, end, or cnt must be specified for the pkgtype parameter.

If the pkgtype=ituabort parameter is specified, then a value of none must be specified for the acn and opcode parameters.

If the pkgtype=ansiabort parameter is specified then a value of none must be specified for the family and opcode parameters.

The opcode, pkgtype, and family  parameters must be specified together for ANSI TCAP translations. The opcode, pkgtype, and acn parameters must be specified together for ITU TCAP translations.

If the family and opcode parameters are specified, then either both parameters must have a value of none or neither parameter can have a value of none.

The GTA table is corrupt or cannot be found.

The GTT DBMM table is corrupt or cannot be found.

A value of none cannot be specified for the opgttsn, cggttsn, and cdgttsn parameter(s).

The GTT Action Path table is corrupt or cannot be found.

The specified path cannot already exist in the GTT Action Path table.

The acn and family parameters cannot be specified together in the command.

The GTT Action - DISCARD, GTT Action - FORWARD, or GTT Action - DUPLICATE feature must be enabled before this command can be entered.

A translation entry corresponding to the specified (opgttsn + opcode + pkgtype + acn/family)/(cgttsn + cggta)/(cdgttsn + cdgta) parameters must exist.

At least one GTT set-value combination must be specified.

The GTT set name specified by the opgttsn, cggttsn, or cdgttsn parameter must match an existing GTT set name.

The GTT set name specified by the opgttsn, cggttsn, and cdgttsn parameters must have set types of opcode, cggta, and cdgta, respectively.

The GTT Set table must be accessible.

The GTA value specified by the cggta or cdgta parameter must be the start GTA in the translation entry.

The GTT path name specified by the gttpn parameter must already exist in the database.

A GTT set-value combination(s) cannot be associated with a GTT path that is already associated to another combination. The value specified for the path name must be different from the existing path name.

The GTT path name specified by the ngttpn parameter cannot already exist in the database.

The value specified for the gttpn and ngttpn parameters cannot be a reserved word.

At least one optional parameter must be specified.

Output

chg-gttapath:gttpn=path2:cggttsn=cgsn2:cggta=45673

    tekelecstp 10-02-04 18:29:41 EST  EAGLE 42.0.0
    chg-gttapath:gttpn=path2:cggttsn=cgsn2:cggta=45673
    Command entered at terminal #4.

    GTT Action Path table is (1 of 10000) 1% full

    CHG-GTTAPATH: MASP A - COMPLTD 
;