4.306 ent-gttapath

Use this command to enter a GTT Action path entry. A GTT Action path consists of pairs of "setname + value" for Opcode/CgGTA/CdGTA. Each "setname + value" pair must already be defined in the GTT translation table.

Parameters

gttpn (mandatory)
GTT Path name.
Range:
ayyyy

1 leading alphabetic character and up to 4 following alphanumeric characters

acn (optional)
Application context name. The ITU TCAPacn field in the incoming MSU.
Range:
0 - 255, none

none—there is no ITU TCAP acn field in the incoming MSU

cdgta (optional)
Called Party Global Title Address.
Range:
1 - 21 digits

If the Hex Digit Support for GTT feature is not enabled, the range is 1 - 21 decimal digits; valid digits are 0-9

If the Hex Digit Support for GTT feature is enabled and on, the range is 1 - 21 hexadecimal digits; valid digits are 0-9, a-f, A-F

cdgttsn (optional)
GTT set name (CDPA type).
Range:
ayyyyyyyy

1 leading alphabetic and up to 8 following alphanumeric characters

cggta (optional)

Calling Party Global Title Address.

Range:
1 - 21 digits

If the Hex Digit Support for GTT feature is not enabled, the range is 1 - 21 decimal digits; valid digits are 0-9

If the Hex Digit Support for GTT feature is enabled and on, the range is 1 - 21 hexadecimal digits; valid digits are 0-9, a-f, A-F

cggttsn (optional)
GTT set name (CGPA type).

Range:
ayyyyyyyy

1 leading alphabetic and up to 8 following alphanumeric characters.

family (optional)
The ANSI TCAPfamily field in the incoming MSU.
Range:
0 - 255, none

none —there is no value in the ANSI TCAP family field in the incoming MSU

opcode (optional)
This parameter specifies the TCAPopcode field in the incoming MSU.
Range:
0 - 255, none

none—there is no value in the TCAP opcode field in the incoming MSU

opgttsn (optional)
GTT set name (Opcode type).
Range:
ayyyyyyyy

1 leading alphabetic and up to 8 following alphanumeric characters

pkgtype (optional)
The ANSI and ITU TCAP package type.
Range:
ituuni
ITU unidirectional
qwp
Query with Permission
qwop
Query without Permission
resp
Response
cwp
Conversation with Permission
cwop
Conversation without Permission
any
Wildcard value
bgn
Begin
end
End
cnt
Continue
ituabort
ITU abort
ansiabort
ANSI abort
ansiuni
ANSI unidirectional

ANSI TCAP Package Types—ansiuni, qwp, qwop, resp, cwp, cwop, ansiabort, any

ITU TCAP Package Types—bgn, ituabort, ituuni, any, end, cnt

Example

ent-gttapath:gttpn=path1:opgttsn=opsn1:acn=111-111-111-111-111-111-111: opcode=123:pkgtype=ituuni:cdgttsn=cdsn1:cdgta=7654

ent-gttapath:gttpn=path2:cggttsn=cgsn2:cggta=45673:opgttsn=opsn2:opcode=124: family=2:pkgtype=ansiuni

ent-gttapath:gttpn=path3:opgttsn=opsn2:pkgtype=ansiuni:opcode=124:family=2: cggttsn=cgsn3:cggta=987654:cdgttsn=cdsn1:cdgta=123456

Dependencies

If the family parameter is specified, then a value of ansiuni, qwp, qwop, resp, cwp, cwop, ansiabort, or any must be specified for the pkgtype parameter.

If the acn parameter is specified, then a value of bgn, ituabort, ituuni, any, end, or cnt must be specified for the pkgtype parameter.

If the pkgtype=ituabort parameter is specified, then a value of none must be specified for the acn and opcode parameters.

If the pkgtype=ansiabort is specified then a value of none must be specified for the family and opcode parameters.

The opcode, pkgtype, and family parameters must be specified together for ANSI TCAP translations. The opcode, pkgtype, and  acn parameters must be specified together for ITU TCAP translations.

If the family and opcode parameters are specified in the command, then both parameters must have a value of none or neither parameter can have a value of none.

The GTA table is corrupt or cannot be found.

The GTT DBMM table is corrupt or cannot be found.

A value of none cannot be specified for the opgttsn, cggttsn, or cdgttsn parameter.

The GTT Action Path table cannot contain more than 10000 entries.

The GTT Action Path table is corrupt or cannot be found.

The path specified cannot already exist in the GTT Action Path table.

The acn and family parameters cannot be specified together in the command.

The GTT Action - DISCARD, GTT Action - FORWARD, or GTT Action - DUPLICATE feature must be enabled before this command can be entered.

A translation entry corresponding to the specified (opgttsn + opcode + pkgtype + acn/family)/(cgttsn + cggta )/(cdgttsn + cdgta) parameters must already exist.

At least one GTT set-value combination must be specified.

The value specified for the opgttsn, cggttsn, or cdgttsn parameter must match an existing GTT setname.

The GTT set name specified by the opgttsn, cggttsn, and cdgttsn parameters must have set types of opcode, cggta, and cdgta, respectively.

The GTT Set table must be accessible.

The GTA value specified by the cggta or cdgta parameter must be the start GTA in the translation entry.

The GTT path name specified by the gttpn parameter must not exist in the GTT Action Path table.

The value specified for the gttpn parameter cannot be a reserved word.

Output

ent-gttapath:gttpn=path2:cggttsn=cgsn2:cggta=45673:opgttsn=opsn2:opcode=124:family=2: pkgtype=ansiuni

    tekelecstp 10-02-04 18:29:41 EST  EAGLE 42.0.0
    ent-gttapath:gttpn=path2:cggttsn=cgsn2:cggta=45673:opgttsn=opsn2:opcode=124: family=2:pkgtype=ansiuni
    Command entered at terminal #4.

    GTT Action Path table is (1 of 10000) 1% full

    ENT-GTTAPATH: MASP A - COMPLTD 
;