4.84 chg-is41opts

Use this command to change the values of one or more of the IS41 option indicators maintained in the IS41 Options (IS41OPTS) table.

Parameters

Note:

The options for the on and off parameters are described in the Notes section.
dfltrn (optional)
Default routing number. The routing digits if Service Portability is not applicable.
Range:
1-15 digits

1 - 15 hexadecimal digits. Valid digits are 0-9, a-f, A-F.

esnmfg (optional)
ESN manufacturer code. The value that will be encoded in the manufacturer code section of the esn parameter for a LOCREQ response message.
Range:
0 - 255
Default:
0
esnsn (optional)
ESN serial number. The value that will be encoded in the serial number section of the esn parameter for a LOCREQ response message.
Range:
0 - 16777215
Default:
0
iec (optional)
International escape code. The international escape code that a received LOCREQ message can contain and have lookup performed.
Range:
1-5 digits, none

none —Removes the IEC from a received LOCREQ message before lookup.

Default:
none
locreqdn (optional)
This parameter specifies whether to obtain the Called Party, used for database lookup, from the SCCP or TCAP layer of a received LOCREQ message.
Range:
tcap
Obtains the Called Party from the TCAP layer.
sccp
Obtains the Called Party from the SCCP layer.
Default:
sccp
locreqrmhrn (optional)
LOCREQ remove HomeRN. This parameter specifies whether to remove the HomeRN from the TCAP Outgoing Called Party for a relayed LOCREQ message.
Range:
yes
Remove HomeRN.
no
Do not remove HomeRN.
Default:
no
mscmktid (optional)
MSCID market ID. The value that will be encoded in the Market ID section of the mscid parameter for a response LOCREQ message.
Range: 0 - 65535
Default:
0
mscswitch (optional)
MSCID market ID switch. The value that will be encoded in the Market ID Switch section of the  mscid parameter for a response LOCREQ message.
Range:
0 - 255
Default:
0
mtplocreqlen (optional)
The number of terminating called party digits to extract from the LOCREQ message.
Range:
5 - 15
Default:
15
System Default:
0
mtplocreqnai (optional)
MTP-routed LOCREQ nature of address indicator. This parameter specifies how the Called Party from the TCAP layer of a received MTP-routed LOCREQ message will be interpreted.
Range:
ccrndn
Country code, routing number, and national directory number
frmsg
Incoming message value.
intl
International number
natl
National number
rnidn
Routing number prefix and international dialed/directory number
rnndn
Routing number prefix and national dialed/directory number
rnsdn
Routing number prefix and subscriber dialed/directory number
sub
Subscriber number
locreqlen
Number of terminating called party digits specified by the locreqlen parameter
Default:
frmsg
nec (optional)
National escape code. The national escape code that a received LOCREQ message can contain and have lookup performed.
Range:
1-5 digits, none

none —Removes the NEC from the received LOCREQ message before database lookup.

Default:
none
off (optional)
This parameter turns off the specified options. Up to 8 comma-separated options can be specified.
Range:
smsreqbypass
locreqrmhrn
locreqrspnd
on (optional)

This parameter turns on the specified options. Up to 8 comma-separated options can be specified.

Range:
smsreqbypass
locreqrmhrn
locreqrspnd
rspcdpapcp (optional)
Response called party point code present. The point code present bit that will encode the SCCP CdPA GTA of a LOCREQ response message.
Range:
off
The response will not contain a point code present bit.
on
The point code in the SCCP CgPA of the received LOCREQ message will be used. If no point code is present, the originating point code in the MTP Routing Label will be used.
frmsg
The point code present bit from the received message will be used. Override does not occur.
Default:
off
rspcdpari (optional)
Response called party routing indicator. The value of the routing indicator bit that will encode the SCCP CdPA GTA of a LOCREQ response message.
Range:
frmsg
The received message routing indicator bit will be used. Override does not occur.
gt
The GTA digits in the SCCP CgPA GTA of the received message will be used. If no GTA digits are present in the SCCP CgPA GTA, override will occur according to the  cdpari=ssn parameter.
ssn
The SCCP CgPA of the received message will be used.
Default:
frmsg
rspcgpanai (optional)
Response calling party nature of address indicator. The nature of address (NAI) that will encode the SCCP CgPA GTA of a LOCREQ response message. 
Range:
0 - 127, none

none —The NAI value in the SCCP CdPA of the received message will be used. Override does not occur.

Default:
none
rspcgpanp (optional)
Response calling party numbering plan. The numbering plan (NP) that will encode the SCCP CgPA GTA of a LOCREQ response message.
Range:
0 - 15, none

none —The NP in SCCP CdPA of the received message will be used. Override does not occur.

Default:
none
rspcgpapcp (optional)
Response calling party point code present. This parameter specifies the point code present bit that will encode the SCCP CgPA GTA of a LOCREQ response message.
Range:
frmsg
The point code present bit from the received message will be used.
on
The point code in the SCCP CdPA of the incoming LOCREQ message will be used. If no point code is present, the destination point code in the MTP Routing Label will be used.
off
The response message will not contain a point code present bit.
Default:
frmsg
rspcgpari (optional)
Response calling party routing indicator. The routing indicator bit that will encode the SCCP CgPA GTA of a LOCREQ response message.
Range:
frmsg
The value from the received message will used. Override does not occur.
gt
The GTA digits in the SCCP CdPA GTA of the received message will be used. If no GTA digits are present, override occurs according to the cgpari=ssn parameter.
ssn
The SCCP CdPA of the received message will be used.
Default:
frmsg
rspcgpatt (optional)
Response calling party translation type. The translation type (TT) that will encode the SCCP CgPA GTA of a LOCREQ response message.
Range: 0 - 255, none

none —The TT in the SCCP CdPA of the received message will be used. Override does not occur.

Default:
none
rspdig (optional)
Routing number. The digit encoding format of the TCAP Outgoing Called Pary parameter for a LOCREQ response message.

The routing number will be used as is or concatenated with the Called Party Number. The routing number format will be used on a per EAGLE node basis.

Range:
ccrndn
Country Code + RN + DN
hrnrndn
HomeRN + RN + DN
rn
rndn
RN + DN
Default:
rn
rspdigtype (optional)
Response digit type. The value that will encode the Digit Type field in the TCAP Outgoing Called Party parameter of a LOCREQ response message.
Range:
0 - 255
Default:
6
rspmin (optional)
Response LOCREQ MIN parameter encoding. This parameter specifies how the min parameter of a LOCREQ response message will be encoded.
Range:
homern
The exact number of digits, with home RN prefix, as encoded in the Called Party of the received LOCREQ message.
nothomern
The exact number of digits, without home RN prefix, as encoded in the Called Party of the received LOCREQ message.
tendelhomern
The leading 10 digits of the Called Party of the received LOCREQ message after deleting the home RN prefix, if it exists.
tenhomern
The leading 10 digits the Called Party of the received LOCREQ message without deletion of the home RN prefix.
tenzero
10 digits filled with 0.
Default:
homern
rspnon (optional)
MSRN nature of number. The nature of number value that will encode the TCAP Outgoing Called Party parameter of a LOCREQ response message.
Range:
0 - 255, none

none —The NAI value in the Digits[Dialed] parameter of a received LOCREQ message is used.

Default:
none
rspnp (optional)
MSRN numbering plan. This parameter specifies the numbering plan that will encode the TCAP Outgoing Called Party parameter of the LOCREQ response message.
Range:
0 - 15, none

2 —Telephony Numbering

Default:
2
rspparm (optional)
Response parameter. The TCAP parameter that will encode the RN and/or DN information for a LOCREQ response message.

This value encodes the DigitType field of the TerminationList, RoutingDigits, or Digits[Destination] on a per EAGLE node basis.

Range:
ddigit
Digits[Destination].
rtdigit
Routingdigits
tlist
Termination list (Default)
Default:
tlist
smsreqbypass (optional)
This parameter specifies whether a received SMSREQ message that passes the MNP Service Selector ( serv=mnp parameter in the chg-sccp-serv command) will undergo A-Port message processing.
Range:
yes
Bypass A-Port.
no
Do not bypass A-Port.
Default:
no
sporttype (optional)
Service Portability Type. The application of Service Portability that is applied to the associated feature.

The S-Port feature must be enabled before this parameter can be specified. The S-Port feature must be turned on before any change to the parameter will impact the associated feature.

Note:

If Service Portability is performed, then the Service Portability prefix (RTDB ‘GRN’entity id ) is applied.
Range:
none
Service Portability is not performed for the feature.
gsm
apply Service Portability prefix for own-network GSM subscribers
is41
apply Service Portability prefix for own-network IS41 subscribers
all
apply Service Portability prefix for all own-network (IS41 and GSM) subscribers
Default:
No change to the current value
System Default:
none
tcapsnai (optional)
This parameter specifies how the Called Party from the TCAP layer of a received LOCREQ message will be interpreted.
Range:
ccrndn
Country code, routing number, and national directory number
frmsg
Incoming message value
intl
International number
natl
National number
rnidn
Routing number prefix and international dialed/directory number
rnndn
Routing number prefix and national dialed/directory number
rnsdn
Routing number prefix and subscriber dialed/directory number
sub
Subscriber number
Default:
frmsg

Example

chg-is41opts:iec=12345:nec=12345:rspcgpari=gt:rspcdpari=gt

chg-is41opts:rspnon=1:tcapsnai=sub:mscmktid=78

chg-is41opts:locreqdn=tcap:rspcgpapcp=frmsg:rspnp=14:rspmin=tendelhomern

chg-is41opts:smsreqbypass=yes:rspcdpapcp=off

chg-is41opts:rspcgpanai=120:rspcgpanp=5:rspcgpatt=25

chg-is41opts:mtplocreqnai=intl:rspparm=tlist:rspdig=rn

chg-is41opts:rspnon=25:mscmktid=535:mscswitch=55

chg-is41opts:esnmfg=159:esnsn=7215:rspdigtype=67:locreqrmhrn=yes

chg-is41opts:sporttype=gsm:dfltrn=48607:on=smsreqbypass,locreqrspnd

Dependencies

The A-Port or IS41 GSM Migration (IGM) feature must be enabled before this command can be entered.

The EGLEOPTS table is corrupt or cannot be found.

The Service Portability and LOCREQ Query Response features must be enabled before the sporttype parameter can be specified.

The smsreqbypass and locreqrmhrn parameters and the on or off parameter cannot be specified in the same command.

The LOCREQ Query Response feature must be enabled before the dfltrn parameter can be specified.

The LOCREQ Query Response feature must be turned on before the locreqrspnd option can be specified for the on or off parameter.

The same option cannot be specified for the on and off parameters.

Notes

on/off options

  • smsreqbypass —Specifies whether a received SMSREQ message that passes the MNP Service Selector (see the chg-sccp-serv command) undergoes A-Port message processing. This option has a default of OFF. 
  • locreqrmhrn —LOCREQ remove HomeRN. Specifies whether to remove the HomeRN from the TCAP Outgoing Called Party for a relayed LOCREQ message. This option has a default of OFF.
  • locreqrspnd —Specifies whether the system should always respond to a LOCREQ query. This option has a default of OFF. 

Output

chg-is41opts:smsreqbypass=yes 

    tekelecstp 06-09-11 15:13:20 EST  EAGLE 36.0.0
    Command entered at terminal #4.
    CHG-IS41OPTS: MASP A - COMPLTD 
;

Related Topics