4.85 chg-is41smsopts

Use this command to enter IS41 SMS system options in the database. This command updates the IS41SMSOPTS table.

Parameters

bpartygttsn (optional)
MO SMS B-Party Routing GTT Set name. The GTT set where Global Title Translation lookup on B-Party digits is performed.
Range:
ayyyyyyyy

1 leading alphabetic and up to 8 following alphanumeric characters

Default:
No change to the current value
System Default:
none
defrn (optional)
Default routing number. A default routing number that is used for own-network subscribers.
Range:
1-15 digits, none

Valid digits are 0-9, a-f, A-F.

Default:
No change to the current value
System Default:
none
modaparam (optional)

This parameter specifies whether the SMS_DestinationAddress or SMS_OriginalDestinationAddress parameter from the IS41 SMDPP message is used for conditioning, lookup, and modification for the MO-based IS41 SMS NP and MO SMS IS41-to-GSM Migration features.

Range:
da
Destination Address
oda
Original Destination Address
Default:
No change to the current value
System Default:
da
moigmpfx (optional)
MO SMS IS41-to-GSM migration prefix. This parameter specifies whether the MO SMS IS41-to-GSM Migration feature uses digits from the RTDB network entity (NE) associated with the B number or the is412gsm parameter (see the chg-gsmopts command) as a prefix to modify the destination address in the outgoing SMDPP.
Range:
ne
The RTDB NE data associated with the B number is used for prefixing.
is412gsm
The provisioned IS412GSM migration prefix is used for prefixing.
Default:
No change to the current value
System Default:
ne
mosmsaclen (optional)

The number of the digits that are taken from the MO SMS CgPA and used as the Area Code in the MO SMS CdPA.

Range:
0 - 8
Default:
No change to the current value
System Default:
0
mosmsdigmat (optional)

This parameter specifies that the “HomeSMSC Match with Digits” search option can be used with the MO-based IS41 SMS NP and MO SMS IS41-to-GSM Migration features.

Range:
exact
The system searches for an exact match of digits in the HomeSMSC Table.
bestfit
The system searches for a match on the leading digits of an incoming message with any provisioned entry in HomeSMSC table if an exact match is not found.
bypass
The HomeSMSC search is not performed.
Default:
No change to the current value
System Default:
exact
mosmsgttdig (optional)
MO SMS B-Party Routing GTT digit. The digits that are used for Global Title Translation.
Range:
sccpcdpa
The SCCP CdPA is used for GTT.
mapbparty
The MAP B-Party number is used for GTT.
Default:
No change to the current value
System Default:
sccpcdpa
mosmsnai (optional)
MO-based SMS Nature Address Indicator. The number conditioning that is performed on the SMS_DestinationAddress digits in the SMDPP message before lookup in the number portability database is performed.

Range:
intl
Number is treated as INTL (1) for number conditioning.
nai
The NAI from the SMS_DestinationAddress parameter in the SMDPP message is used to perform number conditioning
nat
Number is treated as NATL (0) for number conditioning.
unknown
Number is treated as UNKNOWN (2) for number conditioning.

A value of nai must be specified before the intl, natl, nai1, nai2, nai3, and unkn parameters in the chg-npp-serv command can be changed to non-default values for the MOSMSICDPN service.

Default:
No change to the current value
System Default:
intl
mosmstype (optional)
MO-based SMS type. The value of the entity type that indicates that a successful lookup occurred in the number portability database.
Range:
sp
signaling point
rn
routing number
sprn
Lookup is successful if the value of the entity type is sp or rn.
all
Lookup is successful if the value of the entity type is sp or rn, or if no entity type is found.
Default:
No change to the current value
System Default:
sprn
mtsmsackn (optional)
MT-Based SMS acknowledgement. The message generated in response to a successful number portability database lookup for an SMSREQ message from a Home SMSC.
Range:
ack
SMSREQ_ACK message
nack
SMSREQ_NACK (Return Error) message
Default:
No change to current value.
System Default:
ack
mtsmschksrc (optional)
MT-Based SMS check source. This parameter specifies whether the SCCP CgPA GTA of a SMSREQ message is validated to determine whether the source of the message is a Home SMSC.
Range:
yes
The SCCP CgPA GTA of an SMSREQ message is validated.
no
The SCCP CgPA GTA of an SMSREQ message is not validated.

If the mtsmschksrc=yes parameter is specified, and if the incoming SMSREQ message has SCCP CgPA GTA, then the SCCP CgPA GTA must be found in the Home SMSC list for the source of the message to be considered a Home SMSC. If the message is not found in the Home SMSC list, then the MT-Based IS41 SMS NP feature does not process the message.

If the mtsmschksrc=no parameter is specified, or if SCCP CgPA GTA does not exist in the incoming message, then the source of the message is considered to be a Home SMSC, and the MT-Based IS41 SMS NP feature considers the message for processing.

Default:
No change to current value
System Default:
no
mtsmsdigtype (optional)
MT-Based SMS digit type. The value that is used to encode the "Type of digits" field in the SMS_Address parameter of an SMSREQ ACK message.
Range:
0 - 255
Default:
No change to the current value
System Default:
6
mtsmsdltr (optional)
MT-Based SMS delimiter. This parameter specifies whether to insert a delimiter string before or after the routing number (RN) when the RN is used in the mtsmsdnfmt digits.

Note:

The delimiter string that is inserted is determined by the mtsmsdltrv parameter. 
Range:
no
A delimiter string is not inserted.
prern
A delimiter digit string is inserted before the RN.
postrn
A delimiter digit string is inserted after the RN.
Default:
No change to the current value
System Default:
no
mtsmsdltrv (optional)
MT-Based SMS delimiter value. The delimiter digit string inserted before or after the RN when the RN is used in the mtsmsdnfmt digits.
Range:
1-5 digits, none

Valid digit none s are 0-9, a-f, A-F.

Default:
No change to the current value
System Default:
none
mtsmsdnfmt (optional)
MT-Based SMS DN format. The required format of digits to be encoded in the “SMS_Address” parameter of the SMSREQ response.
Range:
rn
routing number
rndn
routing number and the international dialed/directory number
ccrndn
country code, routing number, and national directory/dialed number
dn
directory or dialed number
srfimsi
IMSI is encoded as the “SRFIMSI” parameter from the number portability database.
Default:
No change to the current value
System Default:
rndn
mtsmsesn (optional)
MT-Based SMS electronic serial number. This parameter specifies whether to encode the ESN parameter while generating the SMSREQ response message.
Range:
no
The ESN parameter is not encoded.
yes
The ESN parameter is encoded.
Default:
No change to the current value
System Default:
no
mtsmsnakerr (optional)
MT-Based SMS negative acknowledgement error. The TCAP access denied reason to be included in the NACK response message that is generated for SMSREQ messages.
Range:
0 - 255
Default:
No change to the current value.
System Default:
5
mtsmsparm (optional)
MT-Based SMS parameter. The format used to encode the “SMS_Address” parameter of an SMSREQ response message.
Range:
digit
DIGIT format
pcssn
PCSSN format
Default:
No change to the current value
System Default:
digit
mtsmsssn (optional)
MT-Based SMS subsystem number. The SSN that is encoded in "SMS_Address" field, if the mtsmsparm=pcssn parameter is specified, and the SSN entry is not found in the entity.
Range:
2 - 255
Default:
No change to the current value
System Default:
6
mtsmstype (optional)
MT-Based SMS type. The entity type that indicates a successful lookup occurred in the number portability database.
Range:
sp
signaling point
rn
routing number
sprn
sporrn
all
sp,rn, or DN with no entity
nonsp
rnor DN with no entity
Default:
No change to the current value
System Default:
rn
spfill (optional)
This parameter specifies whether the Numbering Plan Processor (NPP) can populate SP and RN entities for own network subscribers at the same time.
Range:
off
Do not populate both RN and SP entities at the same time
on
Allow population of the RN and SP entities at the same time
Default:
No change to the current value
System Default:
off
sporttype (optional)
Service Portability type. This parameter specifies whether Service Portability is performed for the associated feature.

Note:

If Service Portability is performed, then the Service Portability prefix (RTDB GRN entity id) is applied.
Range:
gsm
Apply Service Portability prefix for own-network GSM subscribers
is41
Apply Service Portability prefix for own-network IS41 subscribers
all
Apply Service Portability prefix for all own-network (IS41 and GSM) subscribers
none
Service Portability is not performed for the feature.
Default:
No change to the current value
System Default:
none

Example

This example sets the IS41 SMS options when MO SMS ASD or MO SMS GRN feature is enabled:

chg-is41smsopts:modaparam=da:mosmsnai=intl:mosmsaclen=3

This example sets the IS41 SMS options when the MT-based IS41 SMS NP feature is enabled:

chg-is41smsopts:mtsmsdltr=no:mtsmsparm=digit

chg-is41smsopts:mtsmsdltrv=9854:mtsmsackn=nack:mtsmsesn=no

chg-is41smsopts:mtsmsssn=2:mtsmsnakerr=55:mtsmsdigtype=25

chg-is41smsopts:mtsmschksrc=no

This example sets the IS41 SMS options when the MO SMS B-Party Routing feature is enabled:

chg-is41smsopts:bpartygttsn=setint001:mosmsgttdig=mapbparty

chg-is41smsopts:mtsmsdnfmt=dn:mtsmstype=sp

This example sets the IS41 SMS options when the MO-based IS41 SMS NP feature is enabled:

chg-is41smsopts:mosmstype=sp:mosmsnai=intl:mosmsdigmat=exact: modaparam=da:mosmsaclen=3

This example sets the IS41 SMS options when the MO SMS IS41-to-GSM Migration feature is enabled.

chg-is41smsopts:mosmsdigmat=exact:moigmpfx=is412gsm:modaparam=da: mosmsnai=intl:mosmsaclen=3

This example sets the Area Code Length, when MO-based IS41 SMS NP, MO SMS IS41-to-GSM Migr, MO SMS ASD or MO SMS GRN feature is enabled:

chg-is41smsopts:mosmsaclen=5

Dependencies

At least one parameter must be specified.

The mtsmsdltrv parameter must be specified before a value of prern or postrn can be specified for the mtsmsdltr parameter.

The value specified for the bpartygttsn parameter must match the name of an existing GTT Set.

The mosmsgttdig=sccpcdpa parameter must be specified before the bpartygttsn=none parameter can be specified.

The GTT set specified for the bpartygttsn parameter must have settype=cdgta (see the ent-gttset command).

If the bpartygttsn=none parameter is specified, then the mosmsgttdig=mapbparty parameter cannot be specified.

The GTT Set table is corrupt or cannot be found.

The EGLEOPTS table is corrupt or cannot be found.

The MT-Based IS41 SMS NP feature must be enabled before the mtsmsdnfmt, mtsmstype, mtsmsparm, mtsmsdltr, mtsmsdltrv, mtsmsackn, mtsmsesn, mtsmsssn, mtsmsnakerr, mtsmsdigtype, or mtsmschksrc parameters can be specified.

The MO SMS IS41-to-GSM Migration feature must be enabled before the moigmpfx parameter can be specified.

The MO SMS B-Party Routing feature must be enabled before the bpartygttsn  or mosmsgttdig parameter can be specified.

The MO-based IS41 SMS NP or MO SMS IS41-to-GSM Migration feature must be enabled before the  mosmsdigmat parameter can be specified.

The MO-based IS41 SMS NP feature must be enabled before the mosmstypedefrn, and spfill  parameters can be specified.

The MO-based IS41 SMS NP, MO SMS IS41-to-GSM Migration, MO SMS ASD, or MO SMS GRN feature must be enabled before the modaparam, mosmsnai, or mosmsaclen parameter can be specified. The modaparam parameter can also be specified if the MO SMS B-Party Routing feature is enabled.

The S-Port feature must be enabled before the sporttype parameter can be specified.

Output

chg-is41smsopts:mtsmsackn=ack

    tekelecstp 08-05-11 13:11:27 EST  EAGLE 39.0.0
    CHG-IS41SMSOPTS: MASP A - COMPLTD 
;