4.86 chg-isup-msg

Use this command to enter or change specific parameters of an ISUP test message in the TESTMSG table. The TIF Test Tool processes ISUP test messages to verify the TIF and NPP provisioned configuration in the system.

Parameters

msgn (mandatory)
Test message number. The ISUP test message number for which parameters are being changed in the TESTMSG table.
Range:
1 - 10
active (optional)
Active. This parameter sets the Active field of the specified ISUP test message.
Range:
no
Do not send the message to the network card for processing.
yes
Send the message to the network card for processing.
Default:
no
cdpndgts (optional)
Called Party Number digits. The value for the CdPN digits in the specified ISUP test message.
Range:
1-32 digits

1 - 32 hexadecimal digits. Valid digits are 0-9, a-f, A-F .

System Default:
1234567890abcdef
Default:
No change to the current value
cdpnnai (optional)
Called Party Number Nature of Address Indicator. The value for the CdPN NAI in the specified ISUP test message. 
Range:
0 - 127
Default:
No change to the current value
System Default:
4
cgpnblset (optional)
Calling Party blacklist set in the incoming linkset.
Range:
1-255, none
Default:
No change to the current value
System Default:
none
cgpncat (optional)
Calling Party Number Category. The value of the CgPN Category in the specified ISUP test message. 
Range:
0 - 255
Default:
0
cgpndgts (optional)
Calling Party Number digits. The value for the CgPN digits in the specified ISUP test message.
Range:
1-32 digits, none

1 - 32 hexadecimal digits. Valid digits are 0-9, a-f, A-F .

Default:
No change to the current value
System Default:
1234567890abcdef
cgpnnai (optional)
Calling Party Number Nature of Address Indicator. The value of the CgPN NAI in the specified ISUP test message. 
Range:
0 - 127
Default:
No change to the current value
gname (optional)
Generic name in the specified ISUP test message. 
Range:
zzzzzzzzzzzzzzz
Default:
N/A
nmbits (optional)
NM Bits. The value of the NM bits in the specified ISUP test message. NM bits are used to determine whether a number portability lookup has already been performed in the network.
Range:
0 - 3
0-1
Portability has not been performed.
2
The number is not ported.
3
The number is ported.
Default:
0
rdn (optional)
Redirecting Number digits. The value for the RDN digits in the specified ISUP test message.
Range:
1-32 digits, none
1 - 32 hexadecimal digits. Valid digits are 0-9, a-f, A-F .
Default:
No change to the current value
System Default:
01234567890abcdef
settype (optional)
Set Type. Set to which generic name belongs in the incoming linkset.
Range:
SetA
SetB
Both
None
Default:
None

Note: After the upgrade, the default value of settype will be set to BOTH as previous releases have BOTH as default value.

Example

chg-isup-msg:msgn=1:active=yes:nmbits=1:cgpndgts=987654321:cdpndgts=923487:cdpnnai=125

chg-isup-msg:msgn=6:cgpncat=200:cdpnnai=23

chg-isup-msg:msgn=1:cgpnblset=20:gname=anomaly

Dependencies

At least one of the optional parameters must be specified.

At least one TIF feature must be enabled before this command can be entered.

The TSTMSG table is corrupt or cannot be found.

Output

chg-isup-msg:msgn=10:active=yes:nmbits=1 

    tekelecstp 08-07-24 10:37:20 EST  EAGLE 39.2.0
    CHG-ISUP-MSG: MASP A - COMPLTD 
;
chg-isup-msg:msgn=1:rdn=11223344
    tekelecstp 20-09-21 13:19:59 EST  EAGLE 46.9.1.0.0
    CHG-ISUP-MSG: MASP A - COMPLTD
;
chg-isup-msg:msgn=2:settype=none
    tekelecstp 21-11-25 01:33:05 MST  EAGLE 47.0
    CHG-ISUP-MSG: MASP B - COMPLTD
;

Related Topics