4.87 chg-j1

Use this command to change an interface for a J1 card in the system. J1 interface can be provisioned on E5-E1T1-B.

Parameters

loc (mandatory)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
j1port (mandatory)
J1 port number
The value must be a J1 port that has already been configured with a J1 interface on the specified T1 card with application as CCS7ITU.
Range:
1-8
encode (optional)
Indicator for use of B8ZS or AMI encoding/decoding.
Range:
b8zs
ami
Default:
No change to the current value.
ll (optional)
T1 cable length in feet between the EAGLE and the connecting node.
Range:
0-655
Default:
No change to the current value.
j1tsel (optional)
Timing source for a J1 card.
Range:
line
slave timing source
external
master timing source
Default:
No change to the current value.

Example

chg-j1:loc=1101:j1port=1:encode=ami:j1tsel=external

chg-j1:loc=1102:j1port=2:encode=b8zs:ll=250

Dependencies

At least one optional parameter must be specified.

The card location specified by the loc parameter must be equipped.

The J1 table must be accessible.

The Card (IMT) table must be accessible.

The card specified by the loc parameter must be a LIMT1 card type and application must be CCS7ITU.

The port specified by the j1port parameter must have already been configured with a J1 interface on the specified J1 card with application as CCS7ITU.

All signaling links that are serviced by the specified J1 card with application as CCS7ITU must be deactivated before the values for the encode, j1tsel, and ll parameters can be changed.

Card locations 1113 - 1118 (OAM, TDM, MDAL cards) cannot be specified as values for the loc parameter.

j1port must be in range from 1 to 8.

Notes

External timing is derived from the EAGLE High-Speed Master Clock (1.544 MHz for T1 or 2.048 MHz for E1): therefore, the Master Timing feature is required. Line timing is derived from its received data stream, if present.

Output

chg-j1:loc=1101:j1port=1:encode=ami

    tekelecstp 13-12-20 12:33:39 EST  46.0.0-65.3.0
    chg-j1:loc=1101:j1port=1:encode=ami
    Command entered at terminal #4.
    CHG-J1: MASP A - COMPLTD
    ;

Related Topics