4.520 rtrv-j1

Use this command to retrieve information for a specified J1 interface or for all J1 interfaces that have been defined by the ent-j1 command.

Parameters

loc (optional)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
Default:
All T1 card locations having J1 interfaces configured are listed.
j1port (optional)
J1 port number. The value must be a J1 port that has already been configured with a J1 interface on the specified J1 card having application as CCS7ITU.
Range:
1-8
Default:
If not specified, all T1 card locations having J1 interfaces configured are listed.

Example

rtrv-j1

rtrv-j1:loc=1101:j1port=1

Dependencies

The loc and j1port parameters must be specified together, if any parameters are specified for the command.

The J1 interface of the J1 card specified by the loc parameter must already be defined before this command can be entered.

The card specified by the loc parameter must be a LIMT1 card type and the application must be CCS7ITU.

The Card (IMT) table must be accessible.

The J1 table must be accessible.

The port specified by the j1port parameter on the card specified by the loc parameter must already be equipped with a J1 interface.

The following card locations (loc parameter) are not valid for this command: 1113 - 1118 and all xy09 and xy10 locations (where x is the frame and y is the shelf).

The j1port parameter must be in the range from 1 to 8.

Notes

None.

Output

rtrv-j1

    tekelecstp 13-12-20 13:16:13 EST  46.0.0-65.3.0
    rtrv-j1
          J1
    LOC   PORT  ENCODE  J1TSEL    LL
    1101  3     B8ZS    LINE      133
    1102  1     B8ZS    LINE      133
    1102  2     B8ZS    LINE      133
    1102  3     B8ZS    LINE      133
;
rtrv-j1:loc=1101:j1port=1

    tekelecstp 13-12-20 13:16:13 EST  46.0.0-65.3.0
    rtrv-j1
          J1
    LOC   PORT  ENCODE  J1TSEL    LL
    1101  3     B8ZS    LINE      133
    

    TS1  1101,A    TS9   1101,B    TS17  ------
    TS2  1101,A1   TS10  ------    TS18  ------
    TS3  1101,B1   TS11  ------    TS19  ------
    TS4  1101,B3   TS12  1102,B3   TS20  ------
    TS5  1102,A    TS13  ------    TS21  ------
    TS6  ------    TS14  ------    TS22  ------
    TS7  1103.A    TS15  ------    TS23  ------
    TS8  1104.A    TS16  ------    TS24  ------ 
;

Legend

  • LOC-- J1 card location in the shelf.
  • J1PORT--Number of the J1 port provisioned on the card in the specified location.
  • ENCODE--Indicator for use of B8ZS or AMI encoding/decoding.
  • J1TSEL-- J1 timing source indicator (external = master timing source, line= slave timing source).

Related Topics