4.521 rtrv-l2t

Use this command to display the values of the SS7 MTP Level 2 timers. The timers are organized in 40 timer sets of 10 timer values each. The timer sets are grouped and system default values are initialized by specification (ANSI, ITU, High Speed for China, High Speed for Q.703 Annex A, JT Q703, and High Speed for Unchannelized T1). Each timer set is administered individually by the chg-l2t command. The ent-slk command is used to assign an SS7 signaling link to any of the timer sets. Each assigned link is associated with a timer set.

Parameters

l2tset (optional)

Level 2 timer set identifer, or timer set number. Up to 40 different SS7 MTP Level 2 timer sets can be defined.

Range:
1 - 40
Default:
Displays all timer sets

Example

rtrv-l2t

rtrv-l2t:l2tset=36

Dependencies

The Level 2 Timer Set table is corrupt or cannot be found.

None.

Notes

The timer values are shown in the output for this command in seconds, even though they were specified in milliseconds in the chg-l2t command.

Output

The timer values are shown in the output for this command in seconds.
rtrv-l2t

    tekelecstp 02-01-02 18:39:27 MST  EAGLE 46.0.0-65.9.0
    rtrv-l2t
    Command entered at terminal #3.
;


    tekelecstp 02-01-02 18:39:27 MST  EAGLE 46.0.0-65.9.0
    LEVEL 2 TIMERS (IN SECONDS)
     L2TSET  T1     T2     T3   T4NPP T4EPP   T5    T6   T7  NODATA TE
     1       9.0    9.0    9.0   2.3   0.60  0.09   4.0  0.3  0.10  --
     2      13.0   11.5   11.5   2.3   0.60  0.10   4.0  1.5  0.10  --
     3      13.0   11.5   11.5   2.3   0.60  0.10   4.0  1.5  0.10  --
     4      13.0   11.5   11.5   2.3   0.60  0.10   4.0  1.5  0.10  --
     5       9.0    9.0    9.0   2.3   0.60  0.10   4.0  0.3  0.10  --
     6      13.0   11.5   11.5   2.3   0.60  0.10   4.0  1.5  0.10  --
     7      13.0   11.5   11.5   2.3   0.60  0.10   4.0  1.5  0.10  --
     8      13.0   11.5   11.5   2.3   0.60  0.10   4.0  1.5  0.10  --
     9       9.0    9.0    9.0   2.3   0.60  0.10   4.0  0.3  0.10  --
    10      13.0   11.5   11.5   2.3   0.60  0.10   4.0  1.5  0.10  --
    11      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    12      49.0   49.0    2.0   8.2   0.50  0.10   4.0  2.0  0.10  --
    13      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    14      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    15      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    16      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    17      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    18      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    19      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    20      40.0   30.0    2.0   8.2   0.50  0.10   4.0  1.5  0.10  --
    21     150.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    22      90.0   90.0    2.0  30.0   0.50  0.10   5.0  2.0  0.10  --
    23     150.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    24     150.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    25     150.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    26     300.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    27     300.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    28     300.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    29     300.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    30     300.0  130.0    1.0  30.0   0.50  0.10   5.0  0.8  0.10  --
    31     151.0   14.0   14.0  30.0   3.00  0.08   3.0  0.5  0.10  --
    32     151.0   14.0   14.0  30.0   3.00  0.08   3.0  0.5  0.10  --
    33     151.0   14.0   14.0  30.0   3.00  0.08   3.0  0.5  0.10  --
    34     151.0   14.0   14.0  30.0   3.00  0.08   3.0  0.5  0.10  --
    35      70.0    7.0    7.0  30.0   3.00  0.12   3.0  2.0  0.10  --
    36      15.0    5.0    3.0  --     3.00  0.20   5.0  2.0  0.10  0.024
    37      15.0    5.0    3.0  --     3.00  0.20   5.0  2.0  0.10  0.024
    38      15.0    5.0    3.0  --     3.00  0.20   5.0  2.0  0.10  0.024
    39      15.0    5.0    3.0  --     3.00  0.20   5.0  2.0  0.10  0.024
    40      15.0    5.0    3.0  --     3.00  0.20   5.0  3.0  0.10  0.024

;
This example displays timer values for a specified timer set:
rtrv-l2t:l2tset=36

    tekelecstp 02-01-02 18:42:26 MST  EAGLE 46.0.0-65.9.0
    LEVEL 2 TIMERS (IN SECONDS)
     L2TSET  T1     T2     T3   T4NPP T4EPP   T5    T6   T7  NODATA TE
    36      15.0    5.0    3.0  --     3.00  0.20   5.0  2.0  0.10  0.024

Legend

  • L2TSET—SS7 MTP Level 2 timer set identifer or number
  • T1—Aligned ready
  • T2—Not aligned
  • T3—Aligned
  • T4NPP—Proving period normal
  • T4EPP—Proving period Emergency
  • T5—Sending SIB
  • T6—Remote congestion
  • T7—Excessive delay of acknowledgment
  • NODATA—Amount of time with no data
  • TE— Error rate monitoring

Related Topics