4.95 chg-lnpopts

Use this command to enter LNP-specific system options in the database. This command updates the LNPOPTS table.

Parameters

Note:

As of Release 43.0, the dra, lrndgts, naiv, and tndgts parameters are obsolete for this command.
admhipri (optional)
Give LNP database administration the highest administrative priority in the system.
Range:
yes
no
Default:
No change to the current value
amactype (optional)
AMA call type.
Range:
3 digits
Default:
No change to the current value
amafeatid (optional)
AMA feature ID.
Range:
3 digits
Default:
No change to the current value
amaslpid (optional)
AMA slip ID.
Range:
9 digits
Default:
No change to the current value
System Default:
none
ccp (optional)
Copy charge parameters. When this parameter has a value of yes, the system copies the Charge Number and Charge Party Station type from an LNP AIN query (if present) to the LNP AIN Response message.
Range:
yes
no
Default:
No change to the current value
cic (optional)
Carrier identification code.
Range:
3-4 digits
Default:
No change to the current value
gtwystp (optional)
Indicates that the LNP system is also configured as a Gateway STP.
Range:
yes
no
Default:
No change to the current value
incslp (optional)
Include AMA slip ID in the response.
Range:
yes
no
Default:
No change to the current value
jipdigits (optional)
Jurisdictional Information Parameter value.
Range:
6 digits
Default:
No change to the current value
jipprv (optional)
Determines whether a Jurisdictional Information Parameter value is to be added to the IAM.
Range:
yes
no
Default:
No change to the current value
servport (optional)
Service portability.
Range:
yes
allows splitting services between TN and LRN override records. This setting allows the LNP user to update LRN overrides for message relay services that are to be supported in the network. The TN gateway point code (NPAC subscription data) is used for message relay services the CLEC wants to provide.
no
If no LRN override services are provisioned, then the TN’s gateway point codes (NPAC subscription data) are used to route queries out of the network. If one or more LRN override services are provisioned, the TN is considered to be ported into the network. In this case, if an LRN override service is requested and the LRN has other services administered, but the requested service is not provisioned, then a UDTS response for the service is provided.
Default:
No change to the current value
sp (optional)
Service provider ID.
Range:
xyyy

4 alphanumeric characters

Default:
No change to the current value
wqredrct (optional)
Wireless queries directed to default GTT.
Range:
on
allows GTT functionality to treat any wireless LNP (WNP and PCS) queries that require GT as a normal GTT
off
routes all wireless LNP queries (WNP and PCS) that require GT directly to the local subsystem
Default:
No change to the current value
tndgts (optional)
SCCP GTA digit length indicator for 10 or 11 digits.
Range:
yes
The system verifies that either 10 or 11 digits are present in the CDPA GTA. If 11 digits are present, the first digit is stripped to derive 10 digits for LNP SMS translation. If 10 digits are present, all 10 digits are used for LNP SMS translation.
no
The system verifies that 11 digits (plus a padded 0 digit) are present in the CDPA GTA. If 11 digits are present, the system strips the first digit and considers only 10 digits for LNP SMS translation.
Default:
No change to the current value

Example

chg-lnpopts:amaslpid=123456789

chg-lnpopts:amactype=003

chg-lnpopts:amafeatid=010

chg-lnpopts:incslp=yes

chg-lnpopts:cic=1369

chg-lnpopts:sp=1234

chg-lnpopts:jipdigits=919460

chg-lnpopts:jipprv=yes

chg-lnpopts:frcsmplx=yes

chg-lnpopts:admhipri=yes

chg-lnpopts:gtwystp=yes

chg-lnpopts:ccp=yes

chg-lnpopts:servport=yes

chg-lnpopts:wqredrct=off

chg-lnpopts:wsmsc10dig=yes

Dependencies

At least one optional parameter must be specified.

The LNP and Triggerless LNP (TLNP) features must be turned on before this command can be entered.

The LNP database must be accessible.

The Triggerless LNP feature must be turned on before the jipprv and jipdigits parameters can be specified.

The LNP SMS feature must be turned on before the wsmsc10dig parameter can be specified.

The LNP options table must be accessible.

The LNP feature or AINPQ feature must be turned on before this command can be entered.

The WNP or PCS feature must be turned on before the wqredrct parameter can be specified.

Notes

If the admhipri=yes parameter is specified, LNP database administration can starve out normal STP updates during LNP administration of 2 TNs per second. If the parameter is set to no, then STP and LNP updates receive the same priority. Depending on the system activity level, the performance of LNP updates may be reduced.

If the gtwystp=yes parameter is specified, the LNP system is also configured as a gateway STP. The NPAC sends down capability point codes without routes. In this configuration, the system does not output a warning (UIM 1176) about capability point codes or true point codes without routes.

MTT rule E3524 has been deleted in Release 43.0 under PR 168138. 

AINPQ feature dependency is required to get AIN queries processed by INPQ subsystem.

Output

chg-lnpopts:amaslpid=123456789

    rlghncxa03w 04-01-07 00:57:31 EST  EAGLE 31.3.0
    CHG-LNPOPTS: MASP A - COMPLTD 
;

Related Topics