4.94 chg-lnp-serv

Use this command to change an existing LNP service.

Parameters

Note:

All alias translation types must be removed before the service can be moved to another translation type.
ndfltact (optional)
New default action associated with an LNP TT Service entry.
Range:
ayyyyyyyy

1 leading alphabetic character followed by up to 8 alphanumeric characters

The ndfltact parameter must have one of the following values:

  • a GTT Action ID that already exists in the GTT Action table with an associated action of disc/udts/tcaperr
  • fallback —Fallback to the relay data for MSUs relayed by LNP using relay data from the LNP database provided by the LNP Message Relay service. For an LNP Query message, the MSU is sent to the LNP local subsystem.
  • falltogtt —Fallback to GTT. The GTT selector search is performed again, using gttselid=none.
Default:
No change to the current value
ndv (optional)
New digits valid.
Range:
sccp
tcap
Default:
No change to the current value
ngttselid (optional)

New GTT Selector ID.

Range:
0 - 65534, none

none —deletes the current value of the GTTSELID field

Default:
No change to the current value
nrqdtblnop (optional)
The action performed with a message that arrives at an SCCP card that does not have the necessary LNP table, and the current message routing is subsystem.
Range:
udts
generate UDTS for the processed MSU
disc
discard the processed MSU
Default:
No change to the current value
nserv (optional)
New reserved service type name.
Range:
ain
in
pcs
wnp
class
lidb
cnam
isvm
lnpqs
wsmsc
udf1
udf2
udf3
udf4
lrnqt
Default:
No change to the current value
ntt (optional)
New translation type.
Range:
0 - 255
Default:
No change to the current value
nttn (optional)
New User defined LNP Translation type name.
Range:
ayyyyyyy, none

1 alphabetic character followed by up to 7 alphanumeric characters

none —defaults the name to the reserved service type name

Default:
If none is specified, the default value is the reserved service type name ( serv parameter).

If none is not specified, no change to current value.

off (optional)
Disables or turns off the specified feature options. This parameter specifies a comma-separated list of feature options that are requested to be turned off. Up to 10 feature options can be specified in the list.
Range:
gttrqd
on (optional)
Enables or turns on the specified feature options. This parameter specifies a comma-separated list of feature options that are requested to be turned on. Up to 10 feature options can be specified in the list.
Range:
gttrqd
serv (optional)
Reserved service type name.
Range:
ain
in
pcs
wnp
class
lidb
cnam
isvm
lnpqs
wsmsc
udf1
udf2
udf3
udf4
lrnqt
Default:
No change to the current value
tt (optional)
Translation type.
Range:
0 - 255
Default:
No change to the current value

Example

chg-lnp-serv:tt=10:ndfltact=fallback:on=gttrqd:ngttselid=none

chg-lnp-serv:serv=lidb:ntt=22:ndv=tcap:nttn=mrlidb

chg-lnp-serv:tt=239:nserv=lrnqt

Dependencies

The same value cannot be specified for the on and off parameters.

The ndfltact=none parameter cannot be specified.

The EGTT feature must be turned on before the  ngttselid,  ndfltact, or on/off=gttrqd  parameter can be specified.

If a GTT Action ID is specified as the value for the ndfltact parameter, then the Action ID must already exist in the GTT Action table.

If a GTT Action ID is specified as a value for the ndfltact parameter, then the GTT Action ID must have an associated action of  disc, udts, or tcaperr.

The LNP feature must be turned on before this command can be entered.

The LNP SMS feature must be turned on before the nserv=wsmsc parameter can be specified.

The PCS 1900 LNP (PLNP) feature must be turned on before the nserv=pcs parameter can be specified.

The WNP feature must be turned on before the nserv=wnp parameter can be specified.

The value of the ntt parameter cannot already exist in the LNP database.

The value of the nttn parameter cannot already exist in the LNP database.

The value of the serv parameter must already exist in the LNP database.

The serv or tt parameter and one other optional parameter must be specified.

The same value cannot be specified for the ndv and dv parameters.

An LNP alias cannot be specified as the value for the ntt parameter.

All LNP aliases for the existing service must be removed from the LNP database before the nserv or ntt parameter can be specified.

A reserved service type name can be specified as a value for the nttn parameter only if the name matches the existing service (the value specified for the serv parameter).

The LNP TT SERV table is corrupt or cannot be found.

If a value of wsmsc,  udf1, udf2, udf3, or udf4 is specified for the serv parameter, then the ndv=sccp parameter must be specified.

If a value of lnpqs, ain, in, pcs, wnp, or lrnqt is specified for the serv parameter, then the ndv=tcap parameter must be specified.

The LRNQT feature must be turned on before the  (n)serv=lrnqt parameter can be specified.

The GTT Action table is corrupt or cannot be found.

The value specified for the nserv parameter cannot already exist in the LNP database.

If the value specified for the  tt parameter is an alias, then the ntt, nserv, nttn, and ndv parameters cannot be specified.

If the value specified for the  (n)serv parameter is already associated with the class, lidb, cnam, isvm, wsmsc, udf1, udf2, udf3, or udf4 service, then a value of lnpqs, lrnqt, ain, in, wnp, or pcs cannot be specified for the (n)serv  parameter.

The  ndfltact, ngttselid, and on/off=gttrqd  parameters cannot be specified with the udf1, udf2, udf3, and udf4 LNP Services.

The nrqdtblnop parameter requires that the Dual ExAP Config feature be enabled.

Notes

on/off options

gttrqd—GTT required. Specifies whether GTT is performed after the successful completion of an LNP Message Relay service and before initiation of an LNP Query service. This option has a default of OFF.

Output

chg-lnp-serv:tt=3:on=gttrqd:ngttselid=10:ndfltact=falltogtt 

    rlghncxa03w 10-11-08 08:50:12 EST  EAGLE 43.0.0
    CHG-LNP-SERV:  MASP A - COMPLTD 
;

Related Topics