4.323 ent-lnp-serv

Use this command to reserve an LNP translation type for a unique LNP service. The available services include up to six query services (ain, in, pcs, lnpqs, wnp,  and lrnqt) and any combination of six message relay or user-defined services. Translation type names can also be defined and are defaulted to the corresponding reserved service type names.

Note:

LNP Translation Type name referenced in the ENT-LNP-SERV command is different from the Translation Type name referenced in ENT-TT command.

A maximum of 10 LNP services can be assigned in systems with up to 12 million numbers, and a maximum of 15 LNP services can be assigned in systems with more than 12 million numbers (using ELAP). Two of these assigned services will always be reserved for administration of AIN and IN Translation Types. Administration of Message Relay user defined services will also be allowed.

Parameters

serv (mandatory)
Reserved service type name.
Range:
ain
in
pcs
wnp
class
lidb
cnam
isvm
lnpqs
wsmsc
udf1
udf2
udf3
udf4
lrnqt
alias (optional)
Alias translation type.
Range:
000 - 255
dfltact (optional)

This parameter specifies the default action associated with the LNP TT Service entry.

Range:
ayyyyyyy

1 leading alphabetic followed by up to 8 alphanumeric characters.  This parameter can have one of the following values:

  • a valid GTT Action ID of type disc/udts/tcaperr that already exists in the GTT Action table
  • fallback —Fallback to the relay data for MSUs relayed by LNP using relay data from the LNP database provided by the LNP Message Relay service. For an LNP Query message, the MSU is sent to the LNP local subsystem.
  • falltogtt —Fallback to GTT. The GTT selector search is performed again, using gttselid=none.
Default:
fallback
dv (optional)
Digits valid.
Range:
sccp
tcap
Default:
sccp —If serv has a value of class, lidb, cnam, isvm, wsmsc, udf1, udf2, udf3, udf4

tcap —If serv has a value of ain, in, pcs, wnp, lnpqs, lrnqt

gttselid (optional)
GTT Selector ID. This parameter specifies the ID used to perform GTT on the MSU processed by the LNP Message Relay or LNP Query Service.  
Range:
0 - 65534
Default:
none
off (optional)
Disables or turns off the specified feature options. This parameter specifies a comma-separated list of feature options that are requested to be turned off. Up to 10 feature options can be specified in the list.
Range:
gttrqd
on (optional)
Enables or turns on the specified feature options. This parameter specifies a comma-separated list of feature options that are requested to be turned on. Up to 10 feature options can be specified in the list.
Range:
gttrqd
rqdtblnop (optional)
The action performed with a message that arrives at an SCCP card that does not have the necessary LNP table, and the current message routing is subsystem.
Range:
udts
generate UDTS for the processed MSU
disc
discard the processed MSU
Default:
No change to the current value
tt (optional)
Translation type.
Range:
000 - 255
ttn (optional)
User defined LNP Translation Type name.
Range:
ayyyyyyy

1 alphabetic character followed by up to 7 alphanumeric characters, the value none is not allowed.

Default:
Reserved service type name (serv parameter)

Example

ent-lnp-serv:serv=class:tt=10:ttn=class1:dfltact=disc1:on=gttrqd:gttselid=100

ent-lnp-serv:serv=lidb:tt=16:dv=tcap:ttn=mrlidb

ent-lnp-serv:serv=lrnqt:tt=239:dv=tcap

Dependencies

The same value cannot be specified for the on and off parameters.

The dfltact=none parameter cannot be specified.

The EGTT feature must be turned on before the gttselid, dfltact, or on/off=gttrqd parameter can be specified.

If a GTT Action ID is specified as the value for the dfltact parameter, then the Action ID must already exist in the GTT Action table.

If a GTT Action ID is specified as a value for the dfltact parameter, then the GTT Action ID must be associated with an action of disc/udts/tcaperr .

The LNP feature must be turned on before this command can be entered.

The PLNP feature must be turned on before the serv=pcs parameter can be specified.

The WNP feature must be turned on before the serv=wnp parameter can be specified.

The LNP SMS feature must be turned on before the serv=wsmsc parameter can be specified.

If a value of udf1, udf2, udf3, or udf4 is specified for the serv parameter, then the dfltact, gttselid and on/off=gttrqd  parameters cannot be specified.

The tt parameter must be specified if the alias parameter is not specified.

The ttn=none parameter cannot be specified.

If a value of udf1, udf2, udf3, udf4, or wsmsc  is specified for the serv parameter, then the dv=sccp parameter must be specified.

If the lnpqs, ain, in, pcs, wnp, or lrnqt value is specified for the serv parameter, then the dv=tcap parameter must be specified.

A reserved service type name can be specified for the ttn parameter only if it matches the serv parameter value.

The value of the tt parameter cannot already exist in the LNP database.

If the tt parameter is specified, then the value of the serv parameter cannot exist in the LNP database.

A maximum of 6 Message Relay services are allowed.

If the alias parameter is specified, then the serv parameter must already have an assigned translation type.

When the alias parameter is specified, its value cannot already exist in the LNP database as a true translation type for this service.

If the alias parameter is specified, then the specified alias cannot be in use.

The LNP database is corrupt or cannot be found.

If the tt parameter is specified, then its value cannot already exist in the LNP database as an alias for this service.

The LNP TT SERV table is corrupt or cannot be found.

The value of the ttn parameter cannot exist in the LNP database.

The LRNQT feature must be turned on before the serv= lrnqt  parameter can be specified.

If the alias parameter is specified, then the tt, ttn, and dv parameters cannot be specified.

The GTT Action table is corrupt or cannot be found.

The nrqdtblnop parameter requires that the Dual ExAP Config feature is enabled.

The defactid=none parameter cannot be specified.

Notes

on/off options

gttrqd —GTT required. Specifies whether GTT is performed after the successful completion of an LNP Message Relay service and before initiation of an LNP Query service. This option has a default of OFF.

Translation type names must be unique for LNP services.

A translation type name can be a reserved service type name only if it matches the specified service.

TTN

LNP Translation type name referenced in the ENT-LNP-SERV command is different from the Translation type name referenced in ENT-TT command.

Output

ent-lnp-serv:tt=1:serv=lidb:on=gttrqd:dfltact=falltogtt

    rlghncxa03w 10-11-08 08:50:12 EST  EAGLE 43.0.0
    ENT-LNP-SERV: MASP A - COMPLTD 
;