4.108 chg-npp-serv

Use this command to change a Numbering Plan Processor (NPP) service entry. An NPP service is any EAGLE feature that uses the NPP to assist with the processing of digit strings.

Note:

This command can be used to enter values for the dlma - dlmc parameters. However, if these parameters have a value other than none in the tifopts:dlma - dlmc  or ttropts:dlma - dlmc  commands, then those values will overwrite the values that were entered for the parameters using the chg-npp-serv command for the TIF and IDPR services, respectively.

Note:

  • The intl, natl, nai1, nai2, nai3, and unkn parameters are used to change the FNAI class to NAI mappings for a service.
  • A value of incoming must be specified for the ttropts:snai parameter before the intl, natl, nai1, nai2, nai3, and unkn parameters can be changed to non-default values for the IDPRCDPN(X) service.
  • A value of incoming must be specified for the ttropts:cgsnai parameter before the intl, natl, nai1, nai2, nai3, and unkn parameters can be changed to non-default values for the IDPRCGPN service.
  • A value of nai must be specified for the is41smsopts:mosmsnai parameter before the intl, natl, nai1, nai2, nai3, and unkn parameters can be changed to non-default values for the MOSMSICDPN service.

  • A value of nai must be specified for the gsmsmsopts:mosmsnai parameter before the intl, natl, nai1, nai2, nai3, and unkn  parameters can be changed to non-default values for the MOSMSGCDPN service.

Parameters

srvn (mandatory)
Service name. The name of the NPP Service.
Range:
nppt
NPP Test Service
idprcdpn
IDPRCDPN Service
idprcgpn
IDPRCGPN Service
tif
TIF Service
tif2
TIF2 Service
tif3
TIF3 Service
mosmsicgpn
MOSMSICGPN Service
mosmsicdpn
MOSMSICDPN Service
mosmsgcgpn
MOSMSGCGPN Service
mosmsgcdpn
MOSMSGCDPN Service
iarcdpn
IARCDPN Service
iarcgpn
IARCGPN Service
idprcdpn2
IDPRCDPN2 Service
idprcdpn3
IDPRCDPN3 Service
idprcdpn4
IDPRCDPN4 Service
tifcgpn
TIFCGPN Service
tifcgpn2
TIFCGPN2 Service
tifcgpn3
TIFCGPN3 Service
dlma (optional)
A delimiter that is used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmb (optional)
A delimiter that is used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmc (optional)
A delimiter that is used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmd (optional)
A delimiter that is used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none —deletes the current value of the delimiter

Default:
none
dlme (optional)
This parameter specifies a delimiter that is used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmf (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmg (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmh (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmi (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmj (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none —deletes the current value of the delimiter

Default:
none
dlmk (optional)
A delimiter used to format the outgoing dialed number.
Range:
1 - 16, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none —deletes the current value of the delimiter

Default:
none
dlml (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none —deletes the current value of the delimiter

Default:
none
dlmm (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none —deletes the current value of the delimiter

Default:
none
dlmn (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmo (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none—deletes the current value of the delimiter

Default:
none
dlmp (optional)
A delimiter used to format the outgoing dialed number.
Range:
1-16 digits, none

1-16 hexadecimal digits. Valid digits are 0-9, a-f, A-F

none —deletes the current value of the delimiter

Default:
none
intl (optional)
International. This parameter maps an International FNAI class to the NAI of the incoming digit string.
Range:
0 - 255, none

none—A rule with an FNAI or OFNAI of intl cannot be provisioned

Default:
No change to the current value
System Default:

1 —IARCDPN, IARCGPN services and all MOSMS services

4 —NPPT, TIF, TIF2, TIF3, IDPRCDPN, IDPRCDPN2, IDPRCDPN3, IDPRCDPN4 and IDPRCGPN services

nai1 (optional)
This parameter maps an NAI-1 FNAI class to the NAI of the incoming digit string.
Range:
0 - 255, none

none—A rule with an FNAI or OFNAI of nai1 cannot be provisioned

Default:
No change to the current value
System Default:
none
nai2 (optional)
This parameter maps an NAI-2 FNAI class to the NAI of the incoming digit string.
Range:
0 - 255, none

none—A rule with an FNAI or OFNAI of nai2 cannot be provisioned

Default:
No change to the current value
System Default:
none
nai3 (optional)
This parameter maps an NAI-3 FNAI class to the NAI of the incoming digit string.
Range:
0 - 255, none

none—A rule with an FNAI or OFNAI of nai3 cannot be provisioned

Default:
No change to the current value
System Default:
none
natl (optional)
This parameter maps a National FNAI class to the NAI of the incoming digit string.
Range:
0 - 255, none

none—A rule with an FNAI or OFNAI of natl cannot be provisioned

Default:
No change to the current value
System Default:
0
IARCDPN, IARCGPN, MOSMSICDPN and MOSMSICGPN services
System Default:

2—MOSMSGCDPN and MOSMSGCGPN services

3—NPPT, TIF, TIF2, TIF3, IDPRCDPN, IDPRCDPN2, IDPRCDPN3, IDPRCDPN4, and IDPRCGPN services

status (optional)
This parameter specifies whether the service can be processed by the NPP.
Range:
off
The service cannot be processed by the NPP.
on
The service can be processed by the NPP.

The status=on parameter must be specified before a service can be processed by the NPP.

Default:
off
unkn (optional)
This parameter maps an Unknown FNAI class to the NAI of the incoming digit string.
Range:
0 - 255
Default:
No change to the current value
System Default:

0—NPPT, TIF, TIF2, TIF3, IDPRCDPN, IDPRCDPN2, IDPRCDPN3, IDPRCDPN4, IDPRCGPN, MOSMSGCDPN and MOSMSGCGPN services

2—IARCDPN, IARCGPN, MOSMSICDPN and MOSMSICGPN services

Example

chg-npp-serv:srvn=nppt:status=on

chg-npp-serv:srvn=nppt:status=on:nai3=6:intl=15:natl=50

chg-npp-serv:srvn=nppt:status=on:nai3=6:intl=15

chg-npp-serv:srvn=tif:dlma=1234567890abcdef:

dlmb=aaaaabbbbbcccccd:dlmc=102030405

Dependencies

The service specified by the srvn parameter must have associated rules before the status=on parameter can be specified.

If the service specified by the srvn parameter references any NPP rules, then the intl, natl, nai1, nai2, and nai3 parameters cannot have a value of none.

Output

chg-npp-serv:srvn=nppt:status=on:nai3=6:intl=15:natl=50

    tekelecstp 08-05-17 15:55:35 EAGLE  39.0.0
    chg-npp-serv:srvn=nppt:status=on:nai3=6:intl=15:natl=50
    CHG-NPP-SERV: MASP A - COMPLTD 
;