4.150 chg-tifopts

Use this command to update the TIF Options table.

Note:

Values other than none that are entered for the dlma, dlmb, or dlmc parameters for the TIF services (TIF, TIF2, TIF3) using this command will overwrite values entered for those parameters using the chg-npp-serv command.

Parameters

condcgpn (optional)
The preconditioning required when a CgPN lookup is needed.
Range:
addcc
add the country code
none
Default:
none
crprel (optional)

The ISUP Release cause for a message that is determined to be circular routed.

Range:
0 - 255
Default:
31 -normal, unspecified
dfltrn (optional)
Default routing number. This parameter provides a set of digits to substitute for a signaling point.

This parameter is used with both calling party and called party numbers.

Range:

1-15 hexadecimal digits, none

Valid digits are 0-9, a-f, A-F

Default:
none
dlma (optional)
Delimiter A. The digits used for Delimiter A in an NPP Formatting Action.
Range:

1-16 hexadecimal digits, none

Valid digits are 0-9, a-f, A-F

Default:
none
dlmb (optional)
Delimiter B. The digits used for Delimiter B in an NPP Formatting Action.
Range:

1-16 hexadecimal digits, none

Valid digits are 0-9, a-f, A-F

Default:
none
dlmc (optional)
Delimiter C. The digits used for Delimiter C in an NPP Formatting Action.
Range:

1-16 hexadecimal digits, none

Valid digits are 0-9, a-f, A-F

Default:
none
iamcgpn (optional)
The format of the outgoing CgPN digits.
Range:
rn
Replaces the CgPN with the RN.
rndn
Adds the RN as a prefix to the CgPN.
dn
Replaces the CgPN with the DN.
Default:
dn
matchseq (optional)
The DN lookup mechanism.
Range:
dn
search the range database if the DN is not found during subscriber lookup
nptype
search the range database if the DN is not found during subscriber lookup or if the located DN does not match the value specified for the nptype or nptypecgpn parameter
Default:
dn
npflag (optional)
This parameter specifies whether the nm parameter is modified in the IAM message to show that NP lookup has been performed.

The nm parameter exists only in incoming and outgoing IAM messages.

Range:
nm
modifies the nm parameter
none
does not modify the nm parameter
Default:
none
nptypecgpn (optional)
NP entity type for the CgPN. The entity type of the DN that is used to indicate that a successful NP lookup occurred.
Range:
sp
signaling point
rn
routing number
sprn
Lookup is successful if the value of the entity type is sp or rn
all
Lookup is always considered successful.
rnspdn
Lookup is successful if the value of the entity type is rn, sp, or dn
any
Lookup is successful if the value of the entity type is rn, sp, or no match with any entity.
Default:
sprn
nptyperls (optional)
The entity type of the DN that is used to indicate that a successful NP lookup occurred for the NPRLS and NPNRLS Service Actions.
Range:
sp
signaling point
rn
routing number
sprn
Lookup is successful if the value of the entity type is sp or rn.
all
Lookup is always considered successful.
rnspdn
Lookup is successful if the value of the entity type is rn, sp, or dn.
any
Lookup is successful if the value of the entity type is rn, sp, or no match with any entity.
Default:
No change to the current value
System Default:
sprn
nptyperly (optional)
The entity type of the DN that is used to indicate that a successful NP lookup occurred for the NPRELAY Service Action.
Range:
sp
signaling point
rn
routing number
sprn
Lookup is successful if the value of the entity type is sp or rn.
all
Lookup is always considered successful.
rnspdn
Lookup is successful if the value of the entity type is rn, sp, or dn.
any
Lookup is successful if the value of the entity type is rn, sp, or no match with any entity.
Default:
No change to the current value
System Default:
sprn
nsaddldata (optional)

This parameter specifies whether the incoming IAM Calling Party Category should be compared with the value for the nspublic parameter before performing Calling Party number substitution.

Range:
yes
Compare the Calling Party Category in the message with the nspublic parameter value.
no
Do not compare the Calling Party Category in the message with the  nspublic parameter value.
Default:
no
nspublic (optional)

The value of the Calling Party Category that indicates that the Calling Party number is public.

Range:
0 - 255
Default:
0
rcausenp (optional)

The value used for the release cause in an REL message when number portability occurs.

Range:
0 - 127
Default:
0
rcausepfx (optional)

The value used for the release cause in an REL message when number portability does not occur.

Range:
0 - 127
Default:
0
rlcopc (optional)
This parameter specifies whether the value specified for the rcause parameter (see the ent/chg-dstn commands) overrides the values specified for the rcausenp and rcausepfx parameters.
Range:
off
Use the values specified for the TIFOPTS rcausenp and rcausepfx parameters as the release cause in REL messages.
on
Use the value specified for the rcause parameter as the release cause in REL messages.
Default:
off
rnrqd (optional)
This parameter specifies whether the redirection number is included in the release message when release handling is indicated.
Range:
yes
no
Default:
yes
snscgpndflt (optional)

The digits to be used in calling number simple number substitution.

Range:

1-32 hexadecimal digits, none

Valid digits are 0-9, a-f, A-F

Default:
none
spfill (optional)
This parameter specifies whether the sp entity type is populated if the value specified for the defltrn or grn parameter is used for NPP processing.
Range:
off
do not populate the sp entity type
on
populate the sp entity type
Default:
No change to the current value
System Default:
off
splitiam (optional)
This parameter specifies when to split the IAM into IAM + 1 SAM.
Range:
15 - 31, none
Default:
none
sportrelay (optional)
The Service Portability configuration option for the NPRELAY Service Action.
Range:
none
Service Portability is not performed for this Service Action
gsm
Apply Service Portability prefix (RTDB ‘GRN’ entity id) for own-network GSM subscribers
is41
Apply Service Portability prefix (RTDB ‘GRN’ entity id) for own-network IS41 subscribers
all
Apply Service Portability prefix (‘GRN’ from RTDB entity) for all own-network (IS41 and GSM) subscribers
Default:
No change to the current value
System Default:
none
sportrls (optional)
The Service Portability configuration option for the NPRLS Service Action.
Range:
none
Service Portability is not performed for this Service Action
gsm
Apply Service Portability prefix (RTDB ‘GRN’entity id ) for own-network GSM subscribers
is41
Apply Service Portability prefix (RTDB ‘GRN’ entity id) for own-network IS41 subscribers
all
Apply Service Portability prefix (‘GRN’ from RTDB entity) for all own-network (IS41 and GSM) subscribers
Default:
No change to the current value
System Default:
none
subcdpn (optional)
Configuration option for the combination of TIFRDNBL Service Action (SA) and Formatting Action (FA) ASD.
Range:
none

TIFRDNBL SA cannot be configured. 1-10 hexadecimal digits, none. Valid digits are 0-9, a-f, A-F.

Default:
No change to the current value
System Default:
none

Example

chg-tifopts:dlma=1234567890

chg-tifopts:dfltrn=123456789012345

chg-tifopts:nptype=all

chg-tifopts:nsaddldata=yes:nspublic=5

chg-tifopts:subcdpn=1234567890

Dependencies

At least one optional parameter must be specified.

At least one of the following features must be enabled before this command can be entered.

  • TIF Additional Subscriber Data
  • TIF Generic Routing Number
  • TIF Number Portability
  • TIF Number Substitution
  • TIF Range CgPN Blacklist 
  • TIF SCS Forwarding
  • TIF Simple Number Substitution
  • TIF Subscriber CgPN Blacklist
  • TIF Selective Screening

The Eagle Options table is corrupt or cannot be found.

If the TIF ASD feature is turned on, then the matchseq=nptype parameter cannot be specified.

If the TIF GRN feature is turned on, then the matchseq=nptype parameter cannot be specified.

The TIF Number Portability feature must be enabled before the matchseq=nptype parameter can be specified.

If the TIF Number Substitution feature is enabled, then the matchseq=nptype parameter cannot be specified.

The TIF Number Substitution feature must be enabled before the nsaddldata parameter or the nspublic parameter can be specified.

If the matchseq=nptype parameter is specified, then the only value that can be specified for the sportrelay or sportrls parameter is none. If the sportrelay or sportrls parameter has a value other than none, then the matchseq=nptype parameter cannot be specified.

The S-Port feature must be enabled before the sportrelay or sportrls parameter can be specified.

When npp-srs table has TIFRDNBL configured as an SA corresponding to the ASN in npp-as table SUBCDPN cannot be set to none.

Notes

None

Output

chg-tifopts:nsaddldata=yes:nspublic=5

    tekelecstp 09-03-05 09:36:03 EST  EAGLE 41.0.0
    CHG-TIFOPTS: MASP A - COMPLTD 
;

Related Topics