4.149 chg-th-alm

Use this command to change the alarm thresholds and associated values.

Parameters

deirconglvl1 (optional)
The percentage of S13 card level 1 alarm threshold settings.
Range:
1 - 100
Default:
40
deirconglvl2 (optional)
The percentage of S13 card level 2 alarm threshold settings.
Range:
1 - 100

Note:

This value must be greater than the value specified for the deirconglvl1 parameter
Default:
80
gttservlv1 (optional)
The percentage for the SCCP GTT Service error ratio level 1 (lower) Threshold Alarm.
Range:
1 - 100
Default:
10
gttservlv2 (optional)
The percentage for the SCCP GTT Service error ratio level 2 (upper) Threshold Alarm.
Range:
1 - 100
Default:
20
imtbusutllvl1 (optional)
The percentage for the IMT Bus Combined utilization level 1 Threshold Alarm (reported on IMT System).
Range:
35 - 70
Default:
70
imtbusutllvl2 (optional)
The percentage for the IMT Bus Combined utilization level 2 Threshold Alarm (reported on IMT System).
Range:
40 - 80
Default:
80
imtcongestlvl1 (optional)
The percentage for the IMT Bus Congestion level 1 Threshold Alarm (reported on HIPR2 card).
Range:
35 - 70
Default:
70
imtcongestlvl2 (optional)
The percentage for the IMT Bus Congestion level 2 Threshold Alarm (reported on HIPR2 card).
Range:
40 - 80

Note:

This value must be greater than the value specified for the imtcongestlvl1 parameter.
Default:
80
lnptndblv1 (optional)
The percentage for the TN Database provisioned level 1 (lower) Capacity Threshold Alarm.
Range:
1 - 100
Default:
80
lnptndblv2 (optional)
The percentage for the LNP TN Database provisioned level 2 (upper) Capacity Threshold Alarm.
Range:
1 - 100

Note:

This value must be greater than the lnptndblv1 parameter value.
Default:
95
nongttservlv1 (optional)
The percentage for the SCCP Non-GTT Service (AIQ, ATINPQ, GPORT, GFLEX, EIR, INPMR, INPQS, LNPMR, LNPQS, LRNQT, PLNPQS, TLNP, V-Flex, WNPQS) error ratio level 1 (lower) Threshold Alarm.
Range:
1 - 100
Default:
10
nongttservlv2 (optional)
The percentage for the SCCP Non-GTT Service (AIQ, ATINPQ, GPORT, GFLEX, EIR, INPMR, INPQS, LNPMR, LNPQS, LRNQT, PLNPQS, TLNP, V-Flex, WNPQS) error ratio level 2 (upper) Threshold Alarm.
Range:
1 - 100
Default:
20
sccpcalcmthd (optional)
Calculation method used to determine whether the TPS Threshold Alarm levels have been exceeded.
Range:
n
use all In Service Normal cards in the calculation
nplus1
use all In Service Normal cards minus 1 card in TPS calculation
Default:
n
sccpthlv1intvl (optional)
Number of minutes during which the SCCP threshold level 1 alarm cannot be raised more than once.
Range:
0 - 1440
Default:
0
sccpthlv2intvl (optional)
Number of minutes during which the SCCP threshold level 2 alarm cannot be raised more than once.
Range:
0 - 1440
Default:
0
sccptpscap (optional)
The percentage for the SCCP Load Capacity Threshold Alarm.
Range:
0 - 100
Default:
80
sfappcalcmthd (optional)
SFAPP Calculation Method.
Range:
{n, nplus1}
Default:
n
sfappconglvl1 (optional)
SFAPP Congestion Alarm Level 1
Range:
1 - 100
Default:
40
sfappconglvl2 (optional)
SFAPP Congestion Alarm Level 2
Range:
1 - 100
Default:
80
sfappservlv1 (optional)
The percentage for the SFAPP Service error ratio level 1 (lower)
Range:
1 - 100
Default:
10
sfappservlv2 (optional)
The percentage for the SFAPP Service error ratio level 2 (upper)
Range:
1 - 100
Default:
20
sfappthlvl1intv1 (optional)
Interval in minutes during which SFAPP Service Alarm Level 1 cannot be raised more.
Range:
0-1440
Default:
0
sfappthlvl2intv1 (optional)
Interval in minutes during which SFAPP Service Alarm Level 2 cannot be raised more.
Range:
0-1440
Default:
0
sfapptpscap (optional)
The percentage for the SFAPP Load Capacity Threshold Alarm.
Range:
0 - 100
Default:
80
sfthrotthresh (optional)
The percentage for the Throttling Action Threshold Alarm.
Range:
1 - 100
Default:
80
sipconglvl1 (optional)
The percentage of SIP card level 1 alarm threshold settings.
Range:
1 - 100
Default:
40
sipconglvl2 (optional)
The percentage of SIP card level 2 alarm threshold settings.
Range:
1 - 100

Note:

This value must be greater than the value specified for the sipconglvl1 parameter.
Default:
80
thermallv1 (optional)
Thermal Alarm Level 1 as a percentage of a card's thermal limit.
Range:
73 - 92
thermallv2 (optional)
Thermal Alarm Level 2 as a percentage of a card's thermal limit.
Range:
74 - 100

Example

chg-th-alm:lnptndblv1=85

chg-th-alm:sccptpscap=85

chg-th-alm:sccpcalcmthd=nplus1

chg-th-alm:gttservlv1=25:gttservlv2=28

chg-th-alm:sccpthlv1intvl=20:sccpthlv2intvl=50

chg-th-alm:nongttservlv1=30:nongttservlv2=60

chg-th-alm:deirconglvl1=50:deirconglvl2=80

chg-th-alm:sipconglvl1=50:sipconglvl2=80

chg-th-alm:sfthrotthresh=70

chg-th-alm:sfappcalcmthd=nplus1

chg-th-alm:sfapptpscap=85

chg-th-alm:sfappthlv1intvl=20:sfappthlv2intvl=50

chg-th-alm:sfappservlv1=30:sfappservlv2=60

chg-th-alm:sfappconglvl1=50:sfappconglvl2=80

Dependencies

Each Level 1 parameter value must be less than its corresponding Level 2 parameter value.

Notes

To display the currently configured values for the Thermal Alarm Levels, use the rtrv-th-alm command.

EPM based E5-ENET, E5-IPSM, and E5-TSM cards have a thermal operating limit of 95 degrees Celsius. E5-SM4G and EPM-B based cards have a thermal operating limit of 90 degrees Celsius. thermallvl1 and thermallvl2 are applicable to both EPM and EPM-B based cards.

The thermal threshold values represent a percentage of the thermal operating limit of a card. 

EPM-B based cards refer to E5-ATM-B, E5-ENET-B, E5-E1T1-B, and E5-MCPM-B cards.

Output

chg-th-alm:thermallv1=85 

    rlghncxa03w 06-05-07 11:43:04 EST  EAGLE 35.0.0
    CHG-TH-ALM: MASP A - COMPLTD 
;
chg-th-alm:deirconglvl1=50:deirconglvl2=80 

    tekelecstp 13-03-19 11:43:04 EST  EAGLE 45.1.0
    CHG-TH-ALM: MASP A - COMPLTD 
;
chg-th-alm:sipconglvl1=50:sipconglvl2=80 

    tekelecstp 15-04-22 13:06:06 MST  EAGLE5 46.3.0
    CHG-TH-ALM: MASP A - COMPLTD
;
chg-th-alm:sfthrotthresh=70 
tekelecstp 15-03-19 11:43:04 EST  EAGLE 46.3.0
    CHG-TH-ALM: MASP A - COMPLTD 
;
chg-th-alm:sfappconglvl1=50:sfappconglvl2=80 
    tekelecstp 13-03-19 11:43:04 EST  EAGLE 46.5.1.5
    CHG-TH-ALM: MASP A - COMPLTD 
;
chg-th-alm:sfappcalcmthd=nplus1 
 tekelecstp 15-04-22 13:06:06 MST  EAGLE5 46.5.1.5
    CHG-TH-ALM: MASP A - COMPLTD
;
chg-th-alm:sfappservlv1=30:sfappservlv2=60 
tekelecstp 15-03-19 11:43:04 EST  EAGLE 46.5.1.5
    CHG-TH-ALM: MASP A - COMPLTD 
;

Related Topics