4.194 dlt-cspc

Use this command to remove a CSPC or an entire CSPC group.

Parameters

Note:

See  Point Code Formats and Conversion for a detailed description of point code formats, rules for specification, and examples.

One, but not both, of these optional parameters must be specified: all, pc/pca/pci/pcn/pcn24.

grp (mandatory)
Group name
Range:
ayyyyyyy

1 alphabetic character followed by up to 7 alphanumeric characters

all (optional)
Use this parameter to confirm that all entries for this concerned signaling point code group are to be removed.
Range:
yes
no
Default:
no
pc (optional)
ANSI point code with subfields network indicator-network cluster-network cluster member (ni-nc-ncm).
Synonym:
pca
Range:
000-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

When chg-sid:pctype=ansi is specified, ni = 000 is not valid.

When chg-sid:pctype=ansi is specified, nc = 000 is not valid if ni = 001–005.

When chg-sid:pctype=ansi is specified, nc = 000 is valid if ni = 006–255.

The point code 000-000-000 is not a valid point code.

pc/pca/pci/pcn/pcn24/pcn16 (optional)
Concerned signaling point code.
pci (optional)
ITU international point code with subfields zone-area-id. The prefix subfield indicates a spare point code (prefix-zone-area-id)
Range:
s-, 0-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—s

zone—0-7

area—000-255

id—0-7

The point code 0-000-0 is not a valid point code.

pcn (optional)
ITU national point code in the format of a 5-digit number (nnnnn); or 2, 3, or 4 numbers (members) separated by dashes (m1-m2-m3-m4) as defined by the chg-stpopts:npcfmti flexible point code option. A group code must be specified when the ITUDUPPC feature is turned on (nnnnn-gc, m1-m2-m3-m4-gc). The prefix subfield indicates a spare point code (prefix-nnnnn, prefix-nnnnn-gc, prefix-m1-m2-m3-m4, prefix-m1-m2-m3-m4-gc).
Range:
s-, 0-16383, aa-zz

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—s-

nnnnn—0-16383

gc—aa-zz

m1-m2-m3-m4—0-14 for each member; values must sum to 14

pcn24 (optional)
24-bit ITU national point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp).
Range:
p-, 000-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—p

msa—000–255

ssa—000–255

sp—000–255

pcn16 (optional)
16-bit ITU national point code with subfields unit number sub number area main number area (un-sna-mna). The prefix subfield indicates a private point code.
Range:
p--, 000-127
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
prefix---p
un---000---127
sna---000---15
mna---000---31

Example

dlt-cspc:grp=grp01:pc=144-201-001

dlt-cspc:grp=grp01:pci=s-144-201-001

dlt-cspc:grp=grp01:all=yes

dlt-cspc:grp=grp01:pcn16=123-7-20

Dependencies

A CPC group name must be specified. The specified group name must exist in the database.

The grp parameter and the all=yes parameter must be entered with no point code parameter, to remove a group and all of its point codes.

If a PC is specified, then the PC network type must match the group network type, and the PC must exist in the specified CPC group. The specified PC is removed from the CPC group.

Either a PC parameter or the all=yes parameter must be specified.

The Spare Point Code Support feature must be enabled before the spare PC prefix s- can be specified for an ITU-I or ITU-N point code.

The pc/pca/pci/pcn/pcn24 parameter and the all parameter cannot be specified in the same command.

The specified CSPC group must not be referred to by any Mate Application entity.

If the Flexible GTT Load Sharing feature is not enabled, a CAUTION is displayed. When the feature is enabled, the command is rejected with message E4534.

Notes

The system issues a warning if a mate application entity could potentially use a group name that is being deleted.

In this command, only ITU-international and ITU national point codes support the spare point code subtype prefix (s-).

Output

dlt-cspc:grp=grp01:pci=2-2-2 

    tekelecstp 04-04-08 12:42:47 EST  EAGLE 31.3.0
    DLT-CSPC: MASP A - COMPLTD 
;

Related Topics