dlt-snmp-host

Use this comand to delete an existing entry in the SNMP Host table.

Parameters

host (optional)

Host name. This parameter is used as the search key to locate a specific table entry. Either HOST or IPADDR must be specified, but both cannot be used in the same command.

Range:: zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
A string of characters, beginning with a letter and comprising up to 32 characters in length. Valid values are a..z, A..Z, 0..9, or .

ipaddr (optional)

IP Address. This parameter is used as the search key to locate a specific table entry. Either HOST or IPADDR must be specified, but both cannot be used in the same command.

Range:: 4 numbers separated by dots, with each number in the range of 0-255.

Example

dlt-snmp-host:host=snmpmgr

dlt-snmp-host:ipaddr=10.25.60.99

Dependencies

The specified HOST or IPADDR must exist in the SNMP Host table.

The SNMP feature must be enabled before an SNMP Host can be configured.

To locate a table entry, either the HOST or IPADDR parameters must be specified, but both cannot be used in the same command.

Notes

None.

Output

dlt-snmp-host:ipaddr=10.25.55.25

tekelecstp 12-06-13 11:08:11 EST 45.0.0-64.66.0
dlt-snmp-host:ipaddr=10.25.55.25
Command entered at terminal #4.
SNMP HOST table is (1 of 2) 50% full
DLT-SNMP-HOST: MASP A - COMPLTD
;

4.262 dlt-snmp-host