rtrv-snmp-host

Use this command to show the configuration parameters of the provisioned SNMP hosts.

Parameters

This command has no parameters.

Example

rtrv-snmp-host

Dependencies

This command cannot be entered while in upgrade mode.

Notes

None

Output

rtrv-snmp-host

tekelecstp 12-06-13 14:37:55 EST 45.0.0-64.66.0
rtrv-snmp-host
Command entered at terminal #4.
IPADDR     192.168.54.100
 HOST       snmphost1
 CMDPORT    161
 TRAPPORT   162
 HB         60
 TRAPCOMM   public
VERSION    snmpv2c
SNMP HOST table is (1 of 2) 50% full
;

rtrv-snmp-host
tekelecstp 23-01-07 16:06:21 EST  EAGLE 47.1.0.0.0-79.16.0
rtrv-snmp-host
Command entered at terminal #4.
IPADDR   10.75.136.168
  HOST      nms
  CMDPORT   161
  TRAPPORT  162
  HB        60
  TRAPCOMM  public
  VERSION   snmpv3
  USERNAME  snmptest
  SECLEVEL  authpriv
  AUTHPROT  md5
  PRIVPROT  des

SNMP HOST table is (1 of 2)  50% full;

Legend

IPADDR - IP address of the SNMP Manager device
HOST - Host name of the Manager device
CMDPORT - SNMP command interface port ID
TRAPPORT - SNMP trap interface port ID
HB - Heartbeat notification interval
TRAPCOMM - Trap community string
VERSION - SNMP version
USERNAME - SNMPv3 Username
SECLEVEL - SNMPv3 security level
AUTHPROT - SNMPv3 authentication protocol
PRIVPROT - SNMPv3 privacy protocol

4.582 rtrv-snmp-host