ent-ip-conn

Use this command to enter SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connection information. The IPCONN table supports the provisioning information related to the SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connections.

Parameters

cname (mandatory)

Connection name. This parameter specifies the unique logical name assigned to each SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connection.

Range:: zzzzzzzzzzzzzzz; A string of alphanumeric characters, beginning with a letter and up to 15 characters in length. Valid values are a..z, A..Z, 0..9.

lhost (mandatory)

Local host name. This parameter specifies the local host name as defined in the IP Host table.

Special characters, such as hyphens, can be used in the host name if the host name is enclosed in double quotes (" ").

Range:: zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz; A string of characters, beginning with a letter and comprising up to 60 characters in length. Valid values are a..z, A..Z, 0..9, '-', or '.' .

lport (mandatory)

IP port on SIP/ENUM/SCCP/SFAPP/IPS with SFLOG card on which EAGLE will listen for the SIP/ENUM/SCCP/SFAPP/IPS with SFLOG message.

Range:: 53, 1024 - 65535

Note:

Command output shows : (M) : lport=IPPort 53..65535

prot (mandatory)

Underlying SIP/ENUM/IPS with SFLOG connection protocol.

Range:: tcp; Transmission Control Protocol.; udp; User Diagram Protocol

Note:
For ENUMHC, only udp is supported

For IPS with SFLOG, only tcp is supported.

rhost (mandatory)

Remote host. This parameter specifies the name of the remote host as defined in the IP Host table.

Special characters, such as hyphens, can be used in the host name if the host name is enclosed in double quotes (" ").

Range:: zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz; A string of characters, beginning with a letter and comprising up to 60 characters in length. Valid values are a..z, A..Z, 0..9, '-', or '.' .

Default:: No change to the current value

System Default:: null

rport (mandatory)

IP port of remote end.

Range:: 1024 - 65535

Note:
For EEDB connection using IPS card, port 17529 should be used

Example

ent-ip-conn:prot=tcp:lhost=lss1:lport=2019:cname=connection1

ent-ip-conn:prot=udp:lhost=enumhost:lport=2014:cname=enumudp

Dependencies

SIPNP Feature must be enabled before entering any SIP connection information.

At least one ENUM card must be provisioned before entering any ENUM connection information.

At least one IPS card with SFLOG=yes must be provisioned before entering any TCP connection information on IPS.

At least one SCCP/SFAPP card must be provisioned before entering any Visualization connection information.

IPCONN table should be accessible.

A unique CNAME must be specified for a new connection.

The value specified for the HOST parameter must begin with an alphabetic character and can contain a..z, A..Z, 0..9, - (hyphen), or . (period).

New connections cannot be made if the Number of CNAMES or TCP/UDP connections have reached the maximum limit.

Duplicate LHOST, RHOST, LPORT and RPORT entry combination is not allowed.

Connections can only be made with a LHOST that is configured on a SIP card.

Remote IP address (RHOST) must not exist in the IPLINK table.

The TCP protocol is not supported for ENUMHC; only the UDP protocol is supported.

Only one UDP can be provision per interface (lhost).

The UDP protocol is not supported for SCCP/SFAPP/IPS card with SFLOG; only the TCP protocol is supported.

Visualization connection supports on Port c on SCCP and SFAPP card.

Valid LPORT values are from range 1024 to 65535. ENUM application support one extra LPORT value that is 53.

3702 Cmd Rej: LPORT must be in range 1024-65535 or 53 (only for ENUM)

Notes

The ent-ip-host command should be used to define local host names and remote host names for IP addresses. This is an existing command and will be used to configure the local host and remote host for an IP address prior to adding any SIP connection.

Maximum of 16 connections can be provisioned against a local host.

If the host name contains a hyphen, then the host name must be enclosed within quotation marks.

LPORT=53 must be allowed only for ENUM application. LPORT 54 to 1023 must not be supported for any of the application and the command should be rejected with MTT number 3702.

For LPORT value below 53 and above 65535, command should be rejected with MTT number 2017.

Output

ent-ip-conn:prot=tcp:lhost=lss1:lport=2020:rhost=rss1:rport=2020:cname=connection5

    
tekelecstp 12-06-25 15:04:28 EST EAGLE 45.0.0
    ent-ip-conn:prot=tcp:lhost= lss1:lport=2020:rhost=rss1:rport=2020:cname=connection5
    Command entered at terminal #4.
    ENT-IP-CONN: MASP A - COMPLTD
;

4.313 ent-ip-conn