chg-ip-conn

Use this command to enable or disable a particular SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connection to receive SIP/ENUM/SCCP/SFAPP/IPS with SFLOG traffic respectively. The IPCONN table supports the provisioning information related to the SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connections.

Parameters

cname (mandatory)

Connection name. This parameter specifies the unique logical name assigned to each SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connection.

Range:: zzzzzzzzzzzzzzz; A string of alphanumeric characters, beginning with a letter and up to 15 characters in length. Valid values are a..z, A..Z, 0..9.

open (mandatory)

The parameter specifies whether the connection manager should allow or disallow the SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connection to receive SIP/ENUM/SCCP/SFAPP/IPS with SFLOG traffic.

Range:: yes; allow the SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connection to receive SIP/ENUM/SCCP/SFAPP/IPS with SFLOG traffic respectively.; no; prohibit the SIP/ENUM/SCCP/SFAPP/IPS with SFLOG connection to receive SIP/ENUM/SCCP/SFAPP/IPS with SFLOG traffic respectively.

Default:: No change to the current value

System Default:: no

Example

chg-ip-conn:cname=conn1101a:open=yes

chg-ip-conn:cname=conn1101a:open=no

Dependencies

SIPNP Feature must be enabled before enabling or disabling any SIP connection.

At least one ENUM card must be provisioned before entering any ENUM connection information.

At least one IPS card with SFLOG=yes must be provisioned before entering any TCP connection information on IPS

At least one SCCP/SFAPP card must be provisioned before entering any Visualization connection information

IPCONN table should be accessible.

The value specified for the CNAME parameter must already exist in the IPCONN table.

Notes

None

Output

chg-ip-conn:cname=conn1101a:open=yes

 tekelecstp 12-06-25 15:44:10 EST EAGLE 45.0.0
    chg-ip-conn:cname=conn1101a:open=yes
    Command entered at terminal #4.
    CHG-IP-CONN: MASP A - COMPLTD
;

4.81 chg-ip-conn