4.330 ent-npp-as

Use this command to enter a Numbering Plan Processor (NPP) Action Set (AS). An AS is a collection of Conditioning Actions (CAs), Service Actions (SAs), and Formatting Actions (FAs).

Parameters

Note:

CAs and FAs are processed in the order that they are specified in the comma-separated list.

Note:

CAs and FAs are processed in consecutive order.

Note:

SAs are processed in order of high-to-low precedence and must be specified in high-to-low precedence order in the comma-separated list. The SAs cannot be duplicated in the list. If multiple SAs in the list have the same precedence, then those SAs are processed in the order in which they appear in the list.

Note:

SAs are processed in order of high-to-low precedence. The SAs must be specified in high-to-low precedence order in the list, and cannot be duplicated in the comma separated list. If multiple SAs in the list have the same precedence, then those SAs are processed in the order in which they appear in the list.

Note:

The ac*, dn*, sn*, and cc* values refer to all CAs that begin with ac, dn, sn, or cc, respectively.

Note:

Refer to the Numbering Plan Processor (NPP) Overview and to the Feature Manual for the feature of interest for more information on provisioning Action Sets and for definitions for the CA, FA, and SA values.

Note:

The sa(X)dgts parameters are currently not supported by any feature.

Note:

The sa(X)val parameters are used by the TIF Range CgPN Blacklist, TIF Subscriber CgPN Blacklist, and TIF Selective Screening features. Up to 2 numerical values can be specified in each list.

Note:

Support of a numerical values list (sa(X)val parameter) is specific to the Service and Service Action.
asn (mandatory)
Action set name. The name of the AS.
Range:
ayyyyyyyyy

1 alphabetic character followed by up to 9 alphanumeric characters

ca (optional)
Conditioning Action list. A comma-separated CA list that can be applied to an incoming digit string. Up to 12 CAs can be specified in the list. The CAs are processed in the order in which they are specified in the list.
Range:
ac1, ac2, ac3, ac4, ac5, ac6, ac7, ac8, accgpn, accgpn1, accgpn2, accgpn3, accgpn4, accgpn5, accgpn6, accgpn7, accgpn8, acdef, aclac, cc1, cc2, cc3, ccdef, cccgpn, dn1, dn2, dn3, dn4, dn5, dn6, dn7, dn8, dn9, dn11, dn12, dn13, dn14, dn15, dnx, fpfx, ign1, ign2, ign3, ign4, ign5, ign6, ign7, ign8, ign9, ign10, pfxa1, pfxa2, pfxa3, pfxa4, pfxa5, pfxa6, pfxa7, pfxa8, pfxb1, pfxb2, pfxb3, pfxb4, pfxb5, pfxb6, pfxb7, pfxb8, pfxc1, pfxc2, pfxc3, pfxc4, pfxc5, pfxc6, pfxc7, pfxc8, pfxd1, pfxd2, pfxd3, pfxd4, pfxd5, pfxd6, pfxd7, pfxd8, pfxe1, pfxe2, pfxe3, pfxe4, pfxe5, pfxe6, pfxe7, pfxe8, pfxf1, pfxf2, pfxf3, pfxf4, pfxf5, pfxf6, pfxf7, pfxf8, sn1, sn2, sn3, sn4, sn5, sn6, sn7, sn8, sn9, sn10, sn11, sn12, sn13, sn14, sn15, snx, znx
fa (optional)
Formatting Action list. A comma-separated FA list that can be applied to the outgoing digit string. Up to 12 FAs can be specified in the list. The FAs are processed in the order they are specified in the list and cannot be duplicated.
Range:
ac, asd, asdother, cc, dlma, dlmb, dlmc, dlmd, dlme, dlmf, dlmg, dlmh, dlmi, dlmj, dlmk, dlml, dlmm, dlmn, dlmo, dlmp, dn, fpfx, grn, grnother, orig, pfxa, pfxb, pfxc, pfxd, pfxe, pfxf, rn, rnospodn, rnosposn, rnospozn, sn, sp, sfrimsi, vmid, zn
Default:
orig
ofnai (optional)
Outgoing filter nature of address indicator. This parameter specifies the filter nature of address indicator (FNAI) class of the outgoing digit string.
Range:
intl
intl value provisioned in the chg-npp-serv command
natl
natl value provisioned in the chg-npp-serv command
nai1
nai1 value provisioned in the chg-npp-serv command
nai2
nai2 value provisioned in the chg-npp-serv command
nai3
nai3 value provisioned in the chg-npp-serv command
unkn
unkn value provisioned in the chg-npp-serv command
inc
NAI of the incoming digit string
Default:
inc
sa (optional)

Service Action list. A comma-separated SA list that can be applied to an incoming digit string. Up to 8 SAs can be specified in the list. The SAs must be specified in high-to-low precedence order in the list, and cannot be duplicated in the list.

Note:

SAs are service-specific.
Range:
asdlkup, blklstqry, blklstrly, blnfndrls, blrls, cdial, ccncchk, cdpnnp, cgpnasdrqd, cgpngrnrqd, cgpnnp, cgpnrtg, cgpnsvcrqd, crp, fpfxrls, fraudchk, fwdscs, grnlkup, inprtg, lacck, migrate, nocgpnrls, npnrls, nprelay, nprls, nscgpn, nscdpn, pprelay, rtdbtrn, rtdbtsp, rtdbtrnsp, skgtartg, snscgpn, selscr, tifgnbl, tiflsbl, tifrdnbl
sa1dgts (optional)
Service Action 1 digit string. This parameter specifies a digit string that can be used with the first SA.
Range:
1 - 8 hexadecimal digits. Valid digits are 0-9, a-f, A-F.
sa1val (optional)
Service Action 1 numerical values list. A comma-separated numerical values list that can be used with the first SA. 
Range:
0 - 65534
sa2dgts (optional)
Service Action 2 digit string. A digit string that can be used with the second SA.
Range:
1 - 8 hexadecimal digits Valid digits are 0-9, a-f, A-F.
sa2val (optional)
Service Action 2 numerical values list. A comma-separated numerical values list that can be used with the second SA. 
Range:
0 - 65534
sa3dgts (optional)
Service Action 3 digit string. A digit string that can be used with the third SA.
Range:
1-8 hexadecimal digits. Valid digits are 0-9, a-f, A-F.
sa3val (optional)
Service Action 3 numerical values list. A comma-separated numerical values list that can be used with the third SA. 
Range:
0 - 65534
sa4dgts (optional)
Service Action 4 digit string. A digit string that can be used with the fourth SA.
Range:
1-8 hexadecimal digits. Valid digits are 0-9, a-f, A-F.
sa4val (optional)
Service Action 4 numerical values list. A comma-separated numerical values list that can be used with the fourth SA. 
Range:
0 - 65534
sa5dgts (optional)
Service Action 5 digit string. A digit string that can be used with the fifth SA.
Range:
1-8 hexadecimal digits. Valid digits are 0-9, a-f, A-F.
sa5val (optional)
Service Action 5 numerical values list. A comma-separated numerical values list that can be used with the fifth SA. 
Range:
0 - 65534
sa6dgts (optional)
Service Action 6 digit string. A digit string that can be used with the sixth SA.
Range:

1-8 hexadecimal digits. Valid digits are 0-9, a-f, A-F.

sa6val (optional)
Service Action 6 numerical values list. A comma-separated numerical values list that can be used with the sixth SA. 
Range:
0 - 65534
sa7dgts (optional)
Service Action 7 digit string. a digit string that can be used with the seventh SA.
Range:
1-8 hexadecimal digits. Valid digits are 0-9, a-f, A-F.
sa7val (optional)
Service Action 7 numerical values list. A comma-separated numerical values list that can be used with the seventh SA. 
Range:
0 - 65534
sa8dgts (optional)
Service Action 8 digit string. A digit string that can be used with the eighth SA.
Range:
1-8 hexadecimal digits. Valid digits are 0-9, a-f, A-F.
sa8val (optional)
Service action 8 numerical values list. A comma-separated numerical values list that can be used with the eighth SA.
Range:
0 - 65534

Example

ent-npp-as:asn=asn1:ca=ign1,ign2,ign4,znx:fa=zn

ent-npp-as:asn=asn4:ca=fpfx,cc2,ign3,dn4:fa=dn,cc

ent-npp-as:asn=asn5:ca=ac8,sn8,cc3:fa=sn,ac,cc:

sa=rtdbtrn,rtdbtsp,rtdbtrnsp,cdial

ent-npp-as:asn=asn1:ca=znx:fa=asd:sa=asdlkup

ent-npp-as:asn=asn10:ca=cc2,ac2,snx:sa=migrate,cdpnnp:fa=cc,rnosposn

ent-npp-as:asn=asn9:ca=fpfx,cc2,dnx:sa=fraudchk,pprelay:fa=cc,dn

ent-npp-as:asn=set10:ca=znx:sa=blrls,blnfndrls,nscgpn:

sa1val=10,20:sa2val=31,41:fa=zn:ofnai=intl

ent-npp-as:asn=asn7:ca=cc2,ac3,sn5:sa=inprtg,skgtartg

ent-npp-as:asn=set32:ca=cc2,accgpn5,snx

ent-npp-as:asn=tifcd7:ca=znx:sa=selscr,cgpnnp:sa1va1=12,none:fa=zn

ent-npp-as:asn=set1:ca=znx:sa=tifgnbl

Dependencies

The value specified for the asn parameter cannot already exist in the NPP AS table.

One of the following combinations of Conditioning Actions must be specified for the AS:

  • znx
  • cc*, dn*  
  • cc*, ac*, sn*

The Formatting Actions specified for the AS must contain the corresponding Formatting Action that a Conditioning Action will populate or load.

The AS must contain a CA that can load or populate the specified FA.

The CAs within an AS cannot condition more than 32 digits.

The AS cannot contain CAs that load or populate the same FA.

Conditioning Actions must be specified for inclusion in an individual Action Set using valid number conditioning rules:

  • If the ZNX Conditioning Action is specified, then the CC*, AC*, SN*, DN*, and DNX Conditioning Actions cannot be specified.
  • If the CC* AND DN* or DNX Conditioning Actions are specified, then the AC*, SN*, SNX, and ZNX Conditioning Actions cannot be specified.
  • If the CC*, AC*, AND SN* or SNX Conditioning Actions are specified, then the DN*, DNX, and ZNX Conditioning Actions cannot be specified.

The AS cannot contain the following combinations of FAs:

  • If the DN FA is specified, then the AC, SN, and ZN FAs cannot be specified.
  • If the ZN FA is specified, then the AC, CC, SN, and DN FAs cannot be specified.
  • If the SN FA is specified, then the ZN and DN FAs cannot be specified.
  • If the RNOSPODN, RNOSPOSN, or RNOSPOZN FA is specified, then the RN, SP, SN, DN, and ZN FAs cannot be specified.
  • The RNOSPODN, RNOSPOSN, and RNOSPOZN FAs cannot be specified together in the command.

If specified, the FPFX CA must be the first value (fpfx) in the ca list.

If specified, the ZNX, SNX, or DNX CA must be the final value (znx, snx, or dnx) in the ca list.

A maximum of 1024 (1K) AS entries can be specified in the NPP system.

If no Service Actions are provisioned, then the sa1val parameter cannot be specified.

If less than 2 Service Actions are provisioned, then the sa2val parameter cannot be specified.

If less than 3 Service Actions are provisioned, then the sa3val parameter cannot be specified.

If less than 4 Service Actions are provisioned, then the sa4val parameter cannot be specified. 

If less than 5 Service Actions are provisioned, then the sa5val parameter cannot be specified.

If less than 6 Service Actions are provisioned, then the sa6val parameter cannot be specified.

If less than 7 Service Actions are provisioned, then the sa7val parameter cannot be specified.

If less than 8 Service Actions are provisioned, then the sa8val parameter cannot be specified.

If no Service Actions are provisioned, then the sa1dgts parameter cannot be specified.

If less than 2 Service Actions are provisioned, then the sa2dgts parameter cannot be specified.

If less than 3 Service Actions are provisioned, then the sa3dgts parameter cannot be specified.

If less than 4 Service Actions are provisioned, then the sa4dgts parameter cannot be specified.

If less than 5 Service Actions are provisioned, then the sa5dgts parameter cannot be specified.

If less than 6 Service Actions are provisioned, then the sa6dgts parameter cannot be specified.

If less than 7 Service Actions are provisioned, then the sa7dgts parameter cannot be specified.

If less than 8 Service Actions are provisioned, then the sa8dgts parameter cannot be specified.

Notes

Note:

When a new Action Set is entered using the ent-npp-as command, the FANF, FASP, FARN, FANE, FASCRCD, and FASCRCG FA lists are unpopulated. These lists are populated using the chg-npp-as command.

Output

ent-npp-as:asn=asn6:ca=znx:sa=nscdpn,nscgpn:fa=zn:ofnai=intl 

    tekelecstp 09-08-18 11:25:31 EAGLE 41.1.0    
    NPP-AS   table is (5 of 1024) 1% full.

    ENT-NPP-AS: MASP A - COMPLTD 
;

Related Topics