4.406 rept-stat-e1

Use this command to display the E1 port status and signaling link status for cards with provisioned E1 ports.

Parameters

e1port (optional)

The E1 port number. When this parameter is specified, only the information for the specified E1 port on the card in the specified card location is displayed.

Range:

1 - 8

loc (optional)

The unique identifier of a specific LIME1 card located in the STP.

Range:

1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Default:

Information for all LIME1 cards is reported.

Example

rept-stat-e1

Dependencies

No other rept-stat-xxx command can be in progress when this command is entered.

The loc parameter must be specified when the e1port parameter is specified.

The active TDM location cannot be specified in the loc parameter.

Card locations 1117 and 1118 and the MUX card locations (xy09 and xy10 where x is the frame and y is the shelf) cannot be specified in the loc parameter.

Notes

Specifying the command without any parameters displays E1 port status for all cards with provisioned E1 ports.

If the loc parameter is specified, status is displayed for all E1 ports provisioned on the card in the specified location.

If the loc and e1port parameters are specified, the E1 port status summary is displayed for all E1 ports provisioned on the card in the specified location, followed by the status of all signaling links assigned to the specified E1 port on the card.

Output

This example shows the output when no parameters are specified:

rept-stat-e1

    rlghncxa03w 05-01-04 07:01:08 EST  EAGLE5 33.0.0
    LOC    E1PORT   PST          SST       AST      
    1203   1        IS-NR        Avail     PARENT   
    1203   2        IS-NR        Avail     PAIRED   
    1203   3        IS-NR        Avail     -----    
    1203   7        OOS-MT       Unavail   -----    
    1207   1        IS-NR        Avail     -----    
    1207   2        IS-NR        Avail     -----    
   Command Completed. 
;

This example shows the output when the loc parameter is specified:

rept-stat-e1:loc=1203

    rlghncxa03w 05-01-04 07:01:08 EST  EAGLE5 33.0.0
    LOC    E1PORT   PST          SST       AST      
    1203   1        IS-NR        Avail     PARENT   
    1203   2        IS-NR        Avail     PAIRED   
    1203   3        IS-NR        Avail     -----    
    1203   7        OOS-MT       Unavail   -----    
    Command Completed. 
;

This example shows the output when the loc and e1port parameters are specified:

rept-stat-e1:loc=1203:e1port=1

    rlghncxa03w 05-01-04 07:01:08 EST  EAGLE5 33.0.0
    LOC    E1PORT   PST          SST       AST      
    1203   1        IS-NR        Avail     PARENT  
      ALARM STATUS       = No Alarms.
      UNAVAIL REASON     = -- 
      SLK    TS  PST          SST       AST      
      A       1  IS-NR        Avail     ---
      A1      2  IS-NR        Avail     ---    
    Command Completed. 
;

rept-stat-e1:loc=1203:e1port=2

    rlghncxa03w 05-01-04 07:01:08 EST  EAGLE5 33.0.0
    LOC    E1PORT   PST          SST       AST      
    1203   2        IS-NR        Avail     PAIRED  
      ALARM STATUS       = No Alarms.
      UNAVAIL REASON     = -- 
    Command Completed. 
;

Legend

• LOC—Card location
• E1PORT—Number of the E1 port provisioned on the card in the specified location.
• PST—Primary state of the card. See Possible Values for PST/SST/AST.
• SST—Secondary state of the card. See Possible Values for PST/SST/AST.
• AST—Associated state of the card. See Possible Values for PST/SST/AST. The values PARENT and PAIRED refer to odd and even adjacent ports on the card that are provisioned in channel bridging mode.
• ALARM STATUS—Either "No Alarms" or current alarm number and text
• UNAVAIL REASON—Reason for the E1 port being unavailable
• SLK—Signaling link assigned to the E1 port
• TS—Timeslot assigned to the signaling link
• PST—Primary state of the signaling link. SeePossible Values for PST/SST/AST.
• SST—Secondary state of the signaling link. See Possible Values for PST/SST/AST. 
• AST—Associated state of the signaling link. See Possible Values for PST/SST/AST.

None.