4.409 rept-stat-gpl
Use this command to display the version of GPLs currently running for an application, plus the approved and trial versions of the GPL that will run if the card is restarted.
Parameters
- display (optional)
- Display mode. Specifies whether the report displays only application GPL data for all cards, or both IMT and application GPL data.
- gpl (optional)
- Generic program load. The GPL for which to
retrieve information.
- Range:
- xyyyyyyy
1 alphabetic character followed by up to 7 alphanumeric characters. Valid GPLs are:
atmhc—Used by E5-ATM-B cards to allow the card to support up to 3 signaling links
bldc32—Flash GPL containing a tar image with all code required on E5-MCAP cards to support VxWorks6.9 32-bit application, as in OAMHC69.
bldc64—Flash GPL containing a tar image with all code required on E5-SM8G-B cards for SCCP64, ENUM64, SIP64 and DEIR64 applications.
blmcap—Flash GPL containing a tar image with all code required on E5-MCAP, E5-E1T1-B, E5-MCPM-B, E5-ATM-B, E5-ENET-B, and E5-SM8G-B cards
blslc32—Flash GPL containing a tar image with all code required on SLIC cards for 32-bit application i.e. MCPHC, IPSHC etc.
blslc64—Flash GPL containing a tar image with all code required on SLIC cards for 64-bit application i.e. SCCP64, ENUM64, SIP64 and DEIR64.
blsl932—Flash GPL containing a tar image with all code required on SLIC cards for 32-bit application on VxWorks6.9, as in IPSHC69 and MCPHC69.
deirhc— Used by E5-SM8G-B cards to support the S13/S13' EIR feature
enumhc—Used by E5-SM8G-B cards to support the ENUM Mobile Number Portability and Tier One Address Resolution application
erthc—Used by E5-ENET-B cards for EAGLE 5 Integrated Monitoring Support functions
hipr2—Communication software used on the High Speed IMT Packet Router (HIPR2) card
ipsg—Used by E5-ENET-B cards to support the combined functionality of IPLIMx M2PA and IPGWx M3UA
ipsg32—Used by SLIC cards to support IPSG application with 64-bit addressing either with GTT functionality or without it.
ipshc—Used by E5-ENET-B cards to support the IPS application
ipshc69—Used by E5-ENET-B and SLIC cards to support the IPS application when running on VxWorks69.
mcphc— Used by E5-MCPM-B cards for the Measurements Platform feature
mcphc69—Used by E5-MCPM-B and SLIC cards for the Measurements Platform feature when running on VxWorks69.
oamhc—Used by E5-MCAP cards for enhanced OAM functions
oamhc69—Used by E5-MCAP cards for enhanced OAM functions, when running on VxWorks 69.
sccphc—Used by E5-SM8G-B cards to support EPAP-based features and the LNP ELAP Configuration feature. If no EPAP-based or LNP ELAP Configuration feature is turned on, and an E5-SM8G-B card is present, then the GPL processes normal GTT traffic.
sfapp—Used by SLIC cards to support the Stateful Firewall Application.
siphc— Used by E5-SM8G-B Cards to support the SIP application.
ss7hc—Application GPL used by E5-E1T1-B and SLIC cards to support E1 and T1 signaling links.
- loc (optional)
- Location. The target card address and versions of all GPLs running at the
specified card location. For E5-ENET-B, or STC cards, this information
includes all non-activated flash GPLs. For cards that are not STC,
E5-ENET-B or E5-IPSM cards, there is no additional data: this parameter
limits the report to the target card address.
- Range:
- 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118, 1109, 1110, 1209, 1210, 1309, 1310, 2109, 2110, 2209, 2210, 2309, 2310, 3109, 3110, 3209, 3210, 3309, 3310, 4109, 4110, 4209, 4210, 4309, 4310, 5109, 5110, 5209, 5210, 5309, 5310, 6109, 6110, 1113, 1115
Example
rept-stat-gpl
rept-stat-gpl:display=all
rept-stat-gpl:loc=1201
rept-stat-gpl:gpl=hipr2
rept-stat-gpl:gpl=siphc
rept-stat-gpl:gpl=enumhc
rept-stat-gpl:gpl=ipsg32
rept-stat-gpl:gpl=sfapp
Dependencies
No other
rept-stat-xxxx
command can be in progress when this command is entered.
Only one of the display=all, loc, and gpl parameters can be specified in the command.
The value specified for the gpl parameter must be supported.
Notes
To check the version of the EPAP or ELAP application,
use the
rept-stat-mps
command.
When this command is entered, information is displayed only for the cards that are IS-NR or IS-ANR.
Use the
chg-gpl command to turn auditing on
and off.
Use the
rtrv-gpl command to display the audit
state.
The approved GPL is the GPL that resides on the active
fixed disk and was made the approved version by specifying the GPL version
number while executing the
act-gpl command.
The trial GPL is the version of the GPL that was
downloaded from the removable drive, but not activated by the
act-gpl command.
When the
act-gpl command is executed, the
version specified becomes the approved GPL and the previously approved GPL
becomes the trial GPL.
If any card is not running the active MASP system release version of a GPL, “ALM” is displayed to indicate that the card is in GPL alarm condition.
If GPL auditing is on, a minor alarm is shown, and
“ALM” is displayed for each APPROVED GPL (rtrv-gpl) and for each RUNNING GPL (rept-stat-gpl) that does not match the GPL in the
RELEASE column of the
rtrv-gpl command output. If GPL
auditing is off, the minor alarm is not activated, but “ALM” is displayed for
each GPL that does not match the GPL in the RELEASE column.
If no gpl parameter is specified, the approved and trial versions for all GPLs are displayed.
If a GPL is not found, a version of “-----------” is displayed. This should happen only for the OAM GPL when the plug-in USB flash drive is not inserted.
If the removable drive is inserted, an “*” (asterisk) is displayed next to the OAM trial version. The asterisk serves as a reminder that the trial version of a GPL is loaded when the card that is running the OAM is restarted. All other cards load their approved versions of GPLs when they are restarted.
If a card is inhibited, “-----------” is displayed for the running version.
When the
gpl parameter is not specified, the
default is to display all application GPLs that are running on provisioned
cards. The flashable GPLs (those loaded on the card by using the
init-flash command) are not
displayed.
A plus (+) symbol in the output indicates that the
flash GPL currently being run has not yet been activated on the card. See the
act-flash or
init-flash
command for a list of flash GPLs.
When a GPL is specified in the gpl parameter, the specified GPL for each card connected to the IMT is displayed.
Output
The output of the rept-stat-gpl
command is site- and configuration-specific. The output examples show typical output
for the commands that are entered; the output that is shown can differ from output
that appears for a particular system.
This example shows the output when no parameters are defined. All GPLs for the card are listed:
rept-stat-gpl
rlghncxa03w 14-05-14 07:01:08 EST EAGLE 46.1.0
GPL CARD RUNNING APPROVED TRIAL
ATMHC 1103 128-002-000 128-002-000 128-002-000
ATMHC 1107 128-002-000 128-002-000 128-002-000
OAMHC 1113 025-002-000 025-002-000 -----------
OAMHC 1115 025-002-000 025-002-000 -----------
SCCPHC 1103 026-001-000 026-001-000 026-001-000
ATMHC 1205 025-001-000 025-001-000 025-001-000
ATMHC 1211 025-001-000 025-001-000 025-001-000
SS7HC 1105 027-001-000 027-001-000 027-001-000
IPSG 1305 040-000-000 040-000-000 040-000-000
SIPHC 1101 134-035-000 134-035-000 134-035-000
ENUMHC 1111 135-020-000 135-020-000 135-020-000
Command Completed.
;
This example shows the output when the display=all parameter is specified. IMT and application GPL information is shown.
rept-stat-gpl:display=all
rlghncxa03w 14-05-14 10:23:93 EST EAGLE 46.1.0
GPL CARD RUNNING APPROVED TRIAL
ENUMHC 1111 135-020-000 135-020-000 135-020-000
BLMCAP 135-020-000 135-020-000 135-020-003
SIPHC 1101 134-035-000 134-035-000 134-035-000
BLMCAP 134-035-000 134-035-000 134-035-001
OAMHC 1113 027-002-000 027-002-000 -----------
BLMCAP 027-001-000 027-001-000 210-001-003
OAMHC 1115 027-002-000 027-002-000 -----------
BLMCAP 027-001-000 027-001-000 210-001-003
SCCPHC 1212 027-001-000 027-001-000 027-001-000
BLMCAP 027-001-000 027-001-000 210-001-003
ATMHC 1203 027-001-000 027-001-000 027-001-000
BLMCAP 027-001-000 027-001-000 210-001-003
HIPR2 1109 027-005-000 027-005-000 027-005-000
HIPR2 1110 027-005-000 027-005-000 027-005-000
HIPR2 1209 027-005-000 027-005-000 027-005-000
HIPR2 1210 027-005-000 027-005-000 027-005-000
HIPR2 1309 027-005-000 027-005-000 027-005-000
HIPR2 1310 027-005-000 027-005-000 027-005-000
Command Completed.
;
This example shows the output when the loc parameter is specified for other cards:
rept-stat-gpl:loc=1217
rlghncxa03w 07-02-01 10:23:93 EST EAGLE 37.5.0
GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL
ATMHC 1217 125-001-000 125-001-000 125-001-000
BLMCAP 125-001-000 125-001-000 125-001-000
Command Completed.
;
This example includes IPSG cards. The example contains truncated output, indicated by 3 vertical dots.
rept-stat-gpl:display=all
tekelecstp 17-09-15 15:11:33 EST EAGLE 46.5.0.0.0-71.11.0
GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL
OAMHC 1113 133-051-000 ALM 028-051-000 028-051-000 *
BLMCAP 133-051-000 133-051-000 133-051-000
OAMHC 1115 028-051-000 028-051-000 028-051-000 *
BLMCAP 133-051-000 133-051-000 133-051-000
HIPR2 1109 133-051-000 133-051-000 133-051-000
HIPR2 1110 133-051-000 133-051-000 133-051-000
HIPR2 1209 133-051-000 133-051-000 133-051-000
HIPR2 6110 133-051-000 133-051-000 133-051-000
.
.
.
SCCPHC 3117 001-051-013 001-051-013 001-051-010
BLMCAP 133-042-000 133-042-000 133-042-000
SCCPHC 3201 001-051-013 001-051-013 001-051-010
BLMCAP 133-042-000 133-042-000 133-042-000
MCPHC 1108 133-051-000 133-051-000 133-051-000
BLMCAP 133-042-000 133-042-000 133-042-000
MCPHC 5313 133-051-000 133-051-000 133-051-000
BLMCAP 133-042-000 133-042-000 133-042-000
SS7HC 2201 133-051-000 133-051-000 133-051-000
BLIXP 133-050-000 133-050-000 027-051-000
SS7HC 3307 133-051-000 133-051-000 133-051-000
BLIXP 133-050-000 133-050-000 027-051-000
SIPHC 1101 134-035-000 134-035-000 134-035-000
BLMCAP 134-035-000 134-035-000 134-035-001
ENUMHC 1111 135-020-000 135-020-000 135-020-000
BLMCAP 135-020-000 135-020-000 135-020-003
.
.
.
IPSG 3116 133-051-000 133-051-000 133-051-000
BLIXP 133-050-000 133-050-000 027-051-000
IPSG 4103 133-051-000 133-051-000 133-051-000
BLIXP 133-050-000 133-050-000 027-051-000
Command Completed.
;
This example displays the output when E5-MCAP cards are used:
rept-stat-gpl
tekelecstp 17-09-15 15:12:33 EST EAGLE 46.5.0.0.0-71.11.0
GPL CARD RUNNING APPROVED TRIAL
SIPHC 1101 134-035-000 134-035-000 134-035-000
ATMHC 1103 128-002-000 128-002-000 128-002-000
ATMHC 1107 128-002-000 128-002-000 128-002-000
ENUMHC 1111 135-020-000 135-020-000 135-020-000
OAMHC 1113 030-013-000 030-013-000 030-013-000 *
OAMHC 1115 030-013-000 030-013-000 030-013-000 *
SCCPHC 1212 025-001-000 025-001-000 025-001-000
ATMHC 1205 025-001-000 025-001-000 025-001-000
ATMHC 1211 025-001-000 025-001-000 025-001-000
SS7HC 1105 027-001-000 027-001-000 027-001-000
IPSG 1305 040-000-000 040-000-000 040-000-000
Command Completed.
;
This example displays the output when an E5-SM8G-B card is running the SIP application:
rept-stat-gpl:gpl=siphc
tekelecstp 12-07-27 14:11:48 EST EAGLE 45.0.0
rept-stat-gpl:gpl=siphc
Command entered at terminal #4.
GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL
SIPHC 1101 134-035-000 134-035-000 134-035-000
Command completed.
;
This example displays the output when an E5-SM8G-B card is running the S13 EIR application:
rept-stat-gpl:gpl=deirhc
tekelecstp 13-03-15 14:11:48 EST EAGLE 45.1.0
rept-stat-gpl:gpl=deirhc
Command entered at terminal #4.
GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL
DEIRHC 1104 134-060-000 134-060-000 134-060-000
Command Completed.
;
This example displays the output when an E5-SM8G-B card is running the ENUM NP application:
rept-stat-gpl:gpl=enumhc
tekelecstp 14-05-14 14:11:48 EST EAGLE 46.1.0
rept-stat-gpl:gpl=enumhc
Command entered at terminal #4.
GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL
ENUMHC 1111 135-020-000 135-020-000 135-020-000
Command completed.
;
This example displays the output when the SLIC card is running the IPSG application with data=gtt/nosccp:
rept-stat-gpl:gpl=ipsg32
tekelecstp 16-08-25 14:11:48 EST EAGLE 46.5.0
rept-stat-gpl:gpl=ipsg32
Command entered at terminal #4.
GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL
IPSG32 1101 140-012-000 140-012-000 140-012-000
Command completed.
;
This example shows the output when the display=all parameter is specified. IMT and application GPL information is shown:
rept-stat-gpl:display=all
tekelecstp 18-01-18 21:30:11 EST EAGLE 46.5.1.5.0-73.10.0
rept-stat-gpl:display=all
Command entered at terminal #18.
;
Command Accepted - Processing
tekelecstp 18-01-18 21:30:11 EST EAGLE 46.5.1.5.0-73.10.0
GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL
OAMHC 1113 033-010-001 033-010-001 ----------- *
BLMCAP 033-010-001 033-010-001 033-010-001
OAMHC 1115 033-010-001 033-010-001 ----------- *
BLMCAP 033-010-001 033-010-001 033-010-001
HIPR2 1109 141-003-000 ALM 143-005-000 143-005-000
HIPR2 1110 141-003-000 ALM 143-005-000 143-005-000
SFAPP 1103 009-011-001 009-011-001 033-010-000
BLDC64 143-006-000 ALM 000-000-000 033-010-001
SS7HC 1106 033-010-000 033-010-000 033-010-000
BLMCAP 077-005-000 ALM 033-010-001 033-010-001
IPSHC 1112 033-010-000 033-010-000 033-010-000
BLIXP 077-005-000 ALM 033-010-001 033-010-001
SCCP64 1107 033-010-000 033-010-000 033-010-000
BLDC64 064-011-000 ALM 000-000-000 033-010-001
Command Completed.
;
Command Executed
This example displays the output when a SLIC card is running SFAPP application:
rept-stat-gpl:gpl=sfapp
tekelecstp 17-11-22 07:09:00 EST EAGLE 46.5.1.5.0-73.2.0
rept-stat-gpl:gpl=sfapp
Command entered at terminal #17.
;
Command Accepted - Processing
tekelecstp 17-11-22 07:09:00 EST EAGLE 46.5.1.5.0-73.2.0
GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL
SFAPP 1108 037-002-000 037-002-000 037-002-000
Command Completed.
;
Command Executed
Legend
- GPL—GPL associated with the cards in the display
- CARD—Card location
- RUNNING—GPL version the card is running. If the card is not running the active MASP system release GPL, ALM appears after the GPL version number in this column.
- APPROVED—GPL version that is the approved GPL
- TRIAL—GPL version that is the trial GPL
- ACTIVE—GPL version
downloaded using the
init-flashcommand and activated using theact-flashcommand - INACTIVE—GPL version
downloaded using the
init-flashcommand but not activated - -----------(dashes)—GPL is not present at the specified location
- *—The trial version will run if the card boots (shown to the right of the TRIAL column)
- ALM—Alarm indicator showing the system has an approved GPL that is not the GPL required for this software release according to the active MASP system release table.
- +—Currently running flash GPL has not been activated (shown between the RUNNING and APPROVED columns)