4.420 rept-stat-mon
Use this command to display the status of the Fast Copy subsystem on FC-capable cards and the EROUTE subsystem on STC cards and E5-STC cards for the EAGLE 5 Integrated Monitoring Support (E5IS) feature.
Parameters
- loc (optional)
- Card location. The card location as stenciled on the shelf for an STC or E5-STC card or an FC-capable card in the system.
- Range:
- 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
- Default:
- Status for all STC and FC-capable cards is reported.
- mode (optional)
- This parameter provides extended performance information, including message flow control (MFC) messaging rates.
If the mode=perf parameter is specified, then only subsystem performance information is displayed.
Example
rept-stat-mon
rept-stat-mon:type=eroute
rept-stat-mon:type=fcs
rept-stat-mon:type=eroute:loc=1101
rept-stat-mon:type=fcs:loc=1104
rept-stat-mon:type=eroute:mode=perf
Dependencies
No other rept-stat-xxx command can be in progress when this command is entered.
At least one STC card must be configured before this command can be entered.
At least one FC-capable card must be provisioned in the system before the type=fcs parameter can be specified.
The loc and mode parameters cannot be specified together in the command.
The type=eroute parameter must be specified before the mode parameter can be specified.
If the loc or mode parameter is specified, then the type parameter must be specified.
Either an STC card or an FC-capable card must be provisioned in the system.
An FC-capable card must be provisioned in the system before the type=fcs parameter can be specified. An STC card must be provisioned in the system before the type=eroute parameter can be specified.
Notes
Fast Copy Cards
E5-ENET-B cards running the IPSG or IPGHC GPL are considered to be FC- capable. A card running the IPGHC GPL must be in the IS-NR State before the card can be considered FC- capable. This restriction does not apply to cards running the IPSG GPL. An FC- capable card is considered FC- enabled when Fast Copy monitoring is enabled for the respective GPL.
- FCMODE = FCOPY for the GPL
- The card must have at least one (1) link with an EMP session established.
When a card is not being FC-Monitored, no FC alarm will be present on the card/port. The card's FCS state remains OFFLINE and the state of FCS ports on the card is OOS-MA/UEQ irrespective of the Ethernet cable being connected on those ports or not.
Output
This example displays card- and system-level information for the Fast Copy and EROUTE subsystems:
rept-stat-mon
rlghncxa03w 11-02-04 16:35:57 IST EAGLE 44.0.0
EROUTE SUBSYSTEM REPORT IS-NR Active -----
STC Cards Configured= 4 Cards IS-NR= 2
EISCOPY BIT = ON
System Threshold = 80% Total Capacity
System Peak EROUTE Load: 7080 Buffers/Sec
System Total EROUTE Capacity: 12000 Buffers/Sec
SYSTEM ALARM STATUS = No Alarms.
CARD VERSION PST SST AST MESSAGE CPU
USAGE USAGE
----------------------------------------------------------------------
1101 052-008-000 IS-NR Active ----- 63% 28%
1103 052-008-001 IS-NR Active ----- 55% 28%
1105 255-255-255 OOS-MT Isolated ----- 0% 0%
1205 255-255-255 OOS-MT Isolated ----- 0% 0%
----------------------------------------------------------------------
EROUTE Service Average Messaging Capacity = 59%
Average CPU Capacity = 28%
CARDS DENIED EROUTE SERVICE:
==================================================================
FAST COPY SUBSYSTEM REPORT IS-NR Active -----
FC Cards Configured= 3 Cards IS-NR= 3
SYSTEM ALARM STATUS = No Alarms.
GPL FCMODE
------------------
IPSG FCOPY
IPGHC FCOPY
------------------
CARD GPL PST SST CPU CARD FCS
------------------------------------------------------
1201 IPSG IS-NR Active 34% ALLOWED
1202 IPSG IS-NR Active 55% ALLOWED
1203 IPGHC IS-NR Active 10% ALLOWED
------------------------------------------------------
Command Completed.
;
This example displays card- and system-level information for the EROUTE subsystem:
rept-stat-mon:type=eroute
rlghncxa03w 11-03-11 16:35:57 IST EAGLE 44.0.0
EROUTE SUBSYSTEM REPORT IS-NR Active -----
STC Cards Configured= 4 Cards IS-NR= 2
EISCOPY BIT = ON
System Threshold = 80% Total Capacity
System Peak EROUTE Load: 7080 Buffers/Sec
System Total EROUTE Capacity: 12000 Buffers/Sec
SYSTEM ALARM STATUS = No Alarms.
CARD VERSION PST SST AST MESSAGE CPU
USAGE USAGE
-----------------------------------------------------------------------
1101 052-008-000 IS-NR Active ----- 63% 28%
1103 052-008-001 IS-NR Active ----- 55% 28%
1203 255-255-255 OOS-MT Isolated ----- 0% 0%
1205 255-255-255 OOS-MT Isolated ----- 0% 0%
-----------------------------------------------------------------------
EROUTE Service Average Messaging Capacity = 59%
Average CPU Capacity = 28%
CARDS DENIED EROUTE SERVICE:
Command Completed.
;
This example displays card- and system-level information for the Fast Copy subsystem:
rept-stat-mon:type=fcs
rlghncxa03w 10-02-02 16:35:57 IST EAGLE 42.0.0
FAST COPY SUBSYSTEM REPORT IS-NR Active -----
FC Cards Configured= 3 Cards IS-NR= 3
SYSTEM ALARM STATUS = No Alarms.
FAST COPY OPTIONS
--------------------------------
FCGPL = IPSG FCMODE = FCOPY
FCGPL = IPGHC FCMODE = FCOPY
--------------------------------
CARD GPL PST SST CPU CARD FCS
------------------------------------------------------
1201 IPSG IS-NR Active 34% ALLOWED
1202 IPSG IS-NR Active 55% ALLOWED
1203 IPGHC IS-NR Active 10% ALLOWED
------------------------------------------------------
Command Completed.
;
The following example shows status of FC ports on a FC capable card when the card is not being FC-Monitored:
rept-stat-mon:type=fcs:loc=1107
rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0
CARD GPL PST SST CPU CARD FCS
1107 IPSG IS-NR Active 21% OFFLINE
ALARM STATUS = No Alarms.
FCS IP PORT A1: OOS-MA Ueq -----
ALARM STATUS = No Alarms.
FCS IP PORT B1: OOS-MA Ueq -----
ALARM STATUS = No Alarms.
IMF CONNECTION STATUS TABLE
---------------------------------------------------------------------------
IPADDRESS ALM ID ASSOC NAME PKT CNT SERVICE MODE
---------------------------------------------------------------------------
PORT ALARM STATUS
---------------------------------------------------------------------------
PORT ID ALARM ID REASON
---------------------------------------------------------------------------
Command Completed.
;
This example displays EROUTE subsystem information for the specified card:
rept-stat-mon:type=eroute:loc=1101
rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0
CARD VERSION TYPE PST SST AST
1101 052-008-000 STC IS-NR Active -----
CARD ALARM STATUS = No Alarms.
TOTAL CPU USAGE = 28%
NTP broadcast = VALID
STC IP CONNECTION
PORT PST SST
A OOS-MT Unavail
B OOS-MT Unavail
Command Completed.
;
This example displays Fast Copy subsystem information for the specified card. (A) or (B) in the IMF CONNECTION STATUS TABLE indicates the Fast Copy A or Fast Copy B network, respectively.
rept-stat-mon:type=fcs:loc=1203
rlghncxa03w 10-02-02 16:35:57 IST EAGLE 42.0.0
CARD GPL PST SST CPU CARD FCS
1203 IPGHC IS-NR Active 10% ALLOWED
ALARM STATUS = No Alarms.
FCS IP PORT A1: IS-NR Active -----
ALARM STATUS = No Alarms.
FCS IP PORT B1: IS-NR Active -----
ALARM STATUS = No Alarms.
IMF CONNECTION STATUS TABLE
---------------------------------------------------------------------------
IPADDRESS ALM ID ASSOC NAME PKT CNT SERVICE MODE
---------------------------------------------------------------------------
172.21.48.15 (A) 582 sg1203a21 100 Copy Rx MSUs
172.22.48.15 (B) 582 sg1203a22 200 Copy Tx MSUs
PORT ALARM STATUS
---------------------------------------------------------------------------
PORT ID ALARM ID REASON
---------------------------------------------------------------------------
A 583 Mismatched Fast Copy Network Addresses
Command Completed.
;
This example displays EROUTE subsystem performance statistics:
rept-stat-mon:type=eroute:mode=perf
rlghncxa03w 11-03-11 16:35:57 IST EAGLE 44.0.0
EROUTE SUBSYSTEM REPORT IS-ANR Ovrflw=1 -----
STC Cards Configured= 2 Cards IS-NR= 2
EISCOPY BIT = ON
System Threshold = 80% Total Capacity
System Peak EROUTE Load: 12200 Buffers/Sec
System Total EROUTE Capacity: 12000 Buffers/Sec
SYSTEM ALARM STATUS = * 0482 Card(s) have been denied EROUTE service
STATISTICS
==================================================================
CARD CPU USAGE MESSAGE RATE
------------------------------------------------------------------
1104 55% 6200
1112 50% 6000
------------------------------------------------------------------
AVERAGE MESSAGING CAPACITY = 80%
AVERAGE CPU USAGE = 27%
TOTAL MESSAGING RATE = 12200
CARDS DENIED EROUTE SERVICE: 1302, 1305
Command Completed.
;
This example displays output when FC-capable cards are configured, and the Fast Copy mode is turned off:
rept-stat-mon:type=fcs
rlghncxa03w 10-02-02 16:35:57 IST EAGLE 42.0.0
FAST COPY SUBSYSTEM REPORT OOS-MA Ueq -----
FC Cards Configured= 2 Cards IS-NR= 1
SYSTEM ALARM STATUS = No Alarms.
FAST COPY OPTIONS
--------------------------------
FCGPL = IPSG FCMODE = OFF
FCGPL = IPGHC FCMODE = OFF
--------------------------------
CARD GPL PST SST CPU CARD FCS
------------------------------------------------------
1105 IPSG OOS-MT Isolated 0% OFFLINE
1106 IPGHC IS-NR Active 15% OFFLINE
------------------------------------------------------
Command Completed.
;
This example displays card- and system-level information when the Fast Copy subsystem is in the OOS-MT/Uavail state:
rept-stat-mon:type=fcs
rlghncxa03w 10-02-02 16:35:57 IST EAGLE 42.0.0
FAST COPY SUBSYSTEM REPORT OOS-MT Unavail -----
FC Cards Configured= 2 Cards IS-NR= 2
SYSTEM ALARM STATUS = * 0597 FC System is Deactivated
FAST COPY OPTIONS
--------------------------------
FCGPL = IPSG FCMODE = FCOPY
FCGPL = IPGHC FCMODE = FCOPY
--------------------------------
CARD GPL PST SST CPU CARD FCS
------------------------------------------------------
1105 IPSG IS-NR Active 12% DEACTIVATED
1106 IPGHC IS-NR Active 10% DEACTIVATED
------------------------------------------------------
Command Completed.
;
This example displays Fast Copy subsystem information for the specified card when the card is in a DEACTIVATED state:
rept-stat-mon:type=fcs:loc=1105
rlghncxa03w 10-02-02 16:35:57 IST EAGLE 42.0.0
CARD GPL PST SST CPU CARD FCS REASON
1105 IPSG IS-NR Active 12% DEACTIVATED CPU Thrshld Exceeded
ALARM STATUS = ** 0590 Fast Copy Application De-activated
FCS IP PORT A1: IS-ANR Restrict -----
ALARM STATUS = ** 0588 FC Port De-activated
FCS IP PORT B1: IS-ANR Restrict -----
ALARM STATUS = ** 0588 FC Port De-activated
IMF CONNECTION STATUS TABLE
---------------------------------------------------------------------------
IPADDRESS ALM ID ASSOC NAME PKT CNT SERVICE MODE
---------------------------------------------------------------------------
172.21.48.15 (A) 582 sg1203a21 100 Copy Rx MSUs
172.22.48.15 (B) 582 sg1203a22 200 Copy Tx MSUs
PORT ALARM STATUS
---------------------------------------------------------------------------
PORT ID ALARM ID REASON
---------------------------------------------------------------------------
Command Completed.
;
Legend
Information displayed in the EROUTE subsystem report:
- STC Cards Configured—Total number of STC cards and E5-STC cards configured in the system
- Cards IS-NR—Total number of STC cards and E5-STC cards in IS-NR state
- EISCOPY BIT—Indicates whether EIS copy function is turned On or Off
- System Threshold—% of system total capacity being used
- System Peak EROUTE Load—Current load in Buffers/Sec
- System Total EROUTE Capacity—Total capacity in Buffers/Sec
- SYSTEM ALARM STATUS—Either "No Alarms" or current alarm number and text
- CARD—Card location
- VERSION—Version number of the GPL loaded on the card. Dashes (- - - - -) in the version column indicate one of the following conditions about the card:
- The card does not run a GPL, such as TDM or MDAL cards.
- The card is configured but is not physically present in the system.
- The card is IS-ANR or is in the process of being loaded.
- TYPE—Card type entered in the database
- PST—Primary state of the card. See Possible Values for PST/SST/AST.
- SST—Secondary state of the card. See Possible Values for PST/SST/AST.
- AST—Associated state of the card. See Possible Values for PST/SST/AST.
- EROUTE Service Average Messaging Capacity\AVERAGE MESSAGING CAPACITY—Average MFC Capacity in percent
- Average CPU Capacity\Average CPU Usage—Average CPU capacity in percent
- Message usage—% of system current MFC rate based on the Max MFC capacity
- TOTAL MESSAGING RATE—Total MFC processing rate
- CPU usage—% of system current CPU usage
- STC IP PORT—Status of the STC IP ports A and B
Information displayed in the Fast Copy subsystem report:
- FC Cards Configured—Total number of FC-capable cards configured in the system
- Cards IS-NR—Total number of FC-capable cards in IS-NR state
- FCMODE—Monitoring mode
- GPL—Application loaded on the card
- SYSTEM ALARM STATUS—Either "No Alarms" or current alarm number and text
- CARD—Card location
- PST—Primary state of the card. See Possible Values for PST/SST/AST.
- SST—Secondary state of the card. See Possible Values for PST/SST/AST.
- CPU—% of system current CPU usage
- CARD FCS—Fast Copy status for the card
- REASON—Deactivation alarm reason on Card FCS. Possible values are "CPU Thrshld Exceeded" or "Auto-Neg Fails".
- FCS IP PORT—status of the FCS IP ports A1 and B1
- IPADDRESS—IP addresses of the IMF
- ASSOC NAME—Association name
- PKT CNT—Snapshot of packets received/sent per association
- SERVICE MODE—Type of service granted by the DAS to FC-enabled card