4.436 rept-stat-t1

Use this command to display the T1 port status and signaling link status for cards with provisioned T1 ports.

Parameters

loc (optional)

Card address. The unique identifier of a specific LIMT1 card located in the STP.

Range:

1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Default:

Information for all LIMT1 cards is reported.

t1port (optional)

T1 port number. This parameter displays information for a T1 port on the card in the specified card location.

Range:

1 - 8 .

Example

rept-stat-t1

rept-stat-t1:loc=1203

rept-stat-t1:loc=1203:t1port=1

Dependencies

No other rept-stat-xxx command can be in progress when this command is entered.

The loc parameter must be specified when the t1port parameter is specified.

The active TDM location cannot be specified in the loc parameter.

Card locations 1117 and 1118 and the MUX card locations (xy09 and xy10 where x is the frame and y is the shelf) cannot be specified in the loc parameter.

Notes

Specifying the command without any parameters displays T1 port status for all cards with provisioned T1 ports.

If the loc parameter is specified, status is displayed for all T1 ports provisioned on the card in the specified location.

If the loc and t1port parameters are specified, the T1 port status summary is displayed for all T1 ports provisioned on the card in the specified location, followed by the status of all signaling links assigned to the specified T1 port on the card.

Output

This example shows the output when no parameters are specified:

rept-stat-t1

    rlghncxa03w 05-01-04 07:01:08 EST  EAGLE5 33.0.0
    LOC    T1PORT   PST          SST       AST      
    1203   1        IS-NR        Avail     BRGD MSTR   
    1203   2        IS-NR        Avail     BRGD SLAV   
    1203   3        IS-NR        Avail     -----    
    1203   7        OOS-MT       Unavail   -----    
    1207   1        IS-NR        Avail     -----    
    1207   2        IS-NR        Avail     -----    
   Command Completed. 
;

This example shows the output when the loc parameter is specified:

rept-stat-t1:loc=1203

    rlghncxa03w 05-01-04 07:01:08 EST  EAGLE5 33.0.0
    LOC    T1PORT   PST          SST       AST      
    1203   1        IS-NR        Avail     BRGD MSTR   
    1203   2        IS-NR        Avail     BRGD SLAV   
    1203   3        IS-NR        Avail     -----    
    1203   7        OOS-MT       Unavail   -----    
    Command Completed. 
;

This example shows the output when the loc and t1port parameters are specified:

rept-stat-t1:loc=1203:t1port=1

    rlghncxa03w 05-01-04 07:01:08 EST  EAGLE5 33.0.0
    LOC    T1PORT   PST          SST       AST      
    1203   1        IS-NR        Avail     BRGD MSTR  
      ALARM STATUS       = No Alarms.
      UNAVAIL REASON     = -- 
      SLK    TS  PST          SST       AST      
      A       1  IS-NR        Avail     ---
      A1      2  IS-NR        Avail     ---    
    Command Completed. 
;

rept-stat-t1:loc=1203:t1port=2

    rlghncxa03w 05-01-04 07:01:08 EST  EAGLE5 33.0.0
    LOC    T1PORT   PST          SST       AST      
    1203   2        IS-NR        Avail     BRGD SLAV  
      ALARM STATUS       = No Alarms.
      UNAVAIL REASON     = -- 
    Command Completed. 
;

Legend

• LOC—Card location
• T1PORT—Number of the T1 port provisioned on the card in the specified location.
• PST—Primary state of the card. See Possible Values for PST/SST/AST.
• SST—Secondary state of the card. See  Possible Values for PST/SST/AST.
• AST—Associated state of the card. See Possible Values for PST/SST/AST. The values PARENT and PAIRED refer to odd and even adjacent ports on the card that are provisioned in channel bridging mode.
• ALARM STATUS—Either "No Alarms" or current alarm number and text
• UNAVAIL REASON—Reason for the T1 port being unavailable
• SLK—Signaling link assigned to the T1 port
• TS—Timeslot assigned to the signaling link
• PST—Primary state of the signaling link. See Possible Values for PST/SST/AST.
• SST—Secondary state of the signaling link. See Possible Values for PST/SST/AST.
• AST—Associated state of the signaling link. See Possible Values for PST/SST/AST.

None.