4.437 rept-stat-trbl

Use this command to display a summary report of all the device trouble notifications that are logged currently in the OAM’s RAM storage area.

Parameters

display (optional)
Display type of alarms to be reported.
Range:
act
Display only active alarms
all
Display all alarms with no timestamps
inhb
Display only inhibited alarms
timestamp
Display all alarms with the date and time when the alarm was logged. Timestamps appear in the output only when the display=timestamp parameter is specified.
Default:
all
level (optional)
The alarm level of the alarms to be displayed
Range:
crit
majr
minr
Default:
All alarms are displayed

Example

rept-stat-trbl

rept-stat-trbl:level=majr

rept-stat-trbl:display=inhb

Dependencies

No other rept-stat-xxx command can be in progress when this command is entered.

Notes

None

Output

This example lists all devices that could appear. This example is to be used as a sample only: all devices and alarms cannot coexist in the system.

rept-stat-trbl
tekelecstp 16-03-29 10:31:06 EST  EAGLE 46.3.0.0.0
    SEQN UAM  AL DEVICE    ELEMENT       TROUBLE TEXT 
    0002.0143  * CARD 1113 OAM           System release GPL(s) not approved
    0011.0176  * SECULOG 1116            Stdby security log – upload required
    0002.0143  * CARD 1113 OAM           System release GPL(s) not approved
    0011.0176  * SECULOG 1116            Stdby security log – upload required
    2353.0022  * CARD 1107 MCP           Clock B for card failed, Clock A normal
    3587.0048  * TERMINAL    1           Terminal failed
    0007.0110  * IMT SYSTEM              Failure detected on one IMT bus
    2343.0002  * GPL SYSTEM BPDCM        Card is not running approved GPL
    4321.0321  * XLIST                   X-LIST occupancy threshold exceeded
    0045.0348  * SEAS SYSTEM             SEAS is at min service limit
    0011.0176  * SECULOG 1116            Stdby security log -- upload required
    4121.0398  * INP SYSTEM              Local Subsystem normal,card(s) abnormal
    2354.0516  * MEAS SYSTEM             Degraded Mode - 1 card failed
    0050 1114 *  HS CLOCK SYSTEM         Clock selection mismatch
    1088.0539  * DLK 1106,A1             Ethernet Interface Down  
    1089.0579  * CARD 1106               FC Network Unavailable  
    3700.0536  * IP7 assoc1234567890     IP Connection Excess Retransmits  
    0021.0318 ** LSN lsn1                REPT-LKSTO: link set prohibited
    0022.0318 ** LSN lsn2                REPT-LKSTO: link set prohibited
    0023.0318 ** LSN lsn3                REPT-LKSTO: link set prohibited
    0024.0236 ** SLK 1315,A   ls11234567 REPT-LKF: not aligned
    0025.0236 ** SLK 1316,A   ls11345678 REPT-LKF: not aligned 
    0010.0318 ** LSN lsn4                REPT-LKSTO: link set prohibited
    0021.0318 ** LSN lsn1                REPT-LKSTO: link set prohibited
    0022.0318 ** LSN lsn2                REPT-LKSTO: link set prohibited
    0023.0318 ** LSN lsn3                REPT-LKSTO: link set prohibited
    0024.0236 ** SLK 1315,A   ls11234567 REPT-LKF: not aligned
    0025.0236 ** SLK 1316,A   ls11345678 REPT-LKF: not aligned
    3540.0203 ** SLK 1201,A   lsn1       REPT-LKF: lost data
    3541.0203 ** SLK 1201,B   lsn4       REPT-LKF: lost data
    3542.0203 ** SLK 1202,A   lsn2       REPT-LKF: lost data
    3543.0203 ** SLK 1202,B   lsn4       REPT-LKF: lost data
    3544.0202 ** SLK 1203,A   lsn3       REPT-LKF: HWP – too many link interrupts
    3545.0202 ** SLK 1203,B   lsn4       REPT-LKF: HWP – too many link interrupts
    3589.0013 ** CARD 1103 SS7ANSI       Card is isolated from the system
    2358.0013 ** CARD 1111 MCP           Card is isolated from the system
    3590.0013 ** CARD 1115 OAM           Card is isolated from the system
    3590.0514 ** CARD 1115 EOAM          Standby MASP is inhibited
    0006.0108 ** IMT BUS A               Major IMT failure detected
                 Card 1105, 1113, 1115
    0012.0390 ** CARD 1109 HMUX          Illegal Address Error
    3591.0208 ** SLK 1101,A   ls1        REPT-LKF: APF - lvl-2 T2 expired
    3592.0208 ** SLK 1101,B   ls2        REPT-LKF: APF - lvl-2 T2 expired
    3593.0202 ** SLK 1102,B2  lsname489+ REPT-LKF: HWP -too many link interrupts
    3594.0236 ** SLK 1103,A   ls3        REPT-LKF: not aligned
    3595.0236 ** SLK 1103,B   ls4        REPT-LKF: not aligned
    3596.0084 ** DLK 1111,A   MCP        IP Connection Unavailable
    0024.0236 ** SLK 1315,A   ls11234567 REPT-LKF: not aligned
    0025.0236 ** SLK 1316,A   ls11345678 REPT-LKF: not aligned
    0943.0318 ** LSN ls1                 REPT-LKSTO: link set prohibited
    0945.0318 ** LSN ls2                 REPT-LKSTO: link set prohibited
    0948.0318 ** LSN ls4                 REPT-LKSTO: link set prohibited
    1234.0082 ** FUSE PANEL 11xx         Alarm in Fuse Panel
    0134.0084 ** IP7 LONGSOCKETNAME1     IP Connection Unavailable
    3537.0084 ** DLK 1215,A  MCP         IP Connection Unavailable
    3537.0084 ** DSM 1315,A              IP Connection Unavailable
    5648.0382 ** E1PORT 1201,2           REPT-E1F:FAC-E1   LOF failure
    0047.0392 ** SECURITY SYSTEM 1211    OA&M IP Security feature status is OFF
    1235 0114 ** IP TPS SYSTEM           System IP TPS threshold exceeded
    3684.0013 ** CARD 1305 SS7IPGW       Card is isolated from the system  
    3688.0236 ** SLK 1203,A   lslg2      REPT-LKF: not aligned 
    3692.0318 ** LSN e5e6                REPT-LKSTO: link set prohibited  
    1090.0576 ** FCS                     ALL FC Network Unavailable 
    3697.0539 ** ENET 1305,A             Ethernet Interface Down  
    3698.0539 ** ENET 1305,B             Ethernet Interface Down  
    3699.0539 ** ENET 1307,B             Ethernet Interface Down 
    0917.0537 ** ENET 1112,B             Ethernet error threshold exceeded
    0189.0084 ** DLK 1104,A   EROUTE     IP Connection Unavailable
    0150.0491 ** DCONN con1              Connection TPS exceed
    0003.0313 *C DPC  s-010-010-003      DPC is prohibited
    0004.0313 *C DPC    010-010-004      DPC is prohibited
    0005.0313 *C DPC ps-010-010-005      DPC is prohibited
    0006.0313 *C DPC  s-252-010-003      DPC is prohibited
    0008.0313 *C DPC    252-010-004      DPC is prohibited
    0009.0313 *C DPC    252-011-*        DPC is prohibited
    0019.0236 *C T1PORT 1301,1           REPT-T1F:FAC-T1   LOS failure
    0028.0313 *C DPC    252-010-001      DPC is prohibited
    0029.0308 *C SYSTEM                  Node isolated due to SLK failures
    0036.0455 *C EIR SYSTEM              EIR Subsystem is not available
    3102.0435 *C LNP SYSTEM              LNP Subsystem is disabled
    0003.0313 *C DPC  s-010-010-003      DPC is prohibited
    0004.0313 *C DPC    010-010-004      DPC is prohibited
    0005.0313 *C DPC ps-010-010-005      DPC is prohibited
    0006.0313 *C DPC  s-252-010-003      DPC is prohibited
    0008.0313 *C DPC    252-010-004      DPC is prohibited
    0009.0313 *C DPC    252-011-*        DPC is prohibited
    0019.0236 *C T1PORT 1301,1           REPT-T1F:FAC-T1   LOS failure
    0028.0313 *C DPC    252-010-001      DPC is prohibited
    0029.0308 *C SYSTEM                  Node isolated due to SLK failures
    0036.0455 *C EIR SYSTEM              EIR Subsystem is not available
    3102.0435 *C LNP SYSTEM              LNP Subsystem is disabled
    0003.0313 *C DPC  s-010-010-003      DPC is prohibited
    0004.0313 *C DPC    010-010-004      DPC is prohibited
    0005.0313 *C DPC ps-010-010-005      DPC is prohibited
    0028.0313 *C DPC    252-010-001      DPC is prohibited
    0006.0313 *C DPC  s-252-010-003      DPC is prohibited
    0008.0313 *C DPC    252-010-004      DPC is prohibited
    0009.0313 *C DPC    252-011-*        DPC is prohibited
    2120.0058 *C CDT  1                  Critical customer trouble detected
    0029.0308 *C SYSTEM                  Node isolated due to SLK failures
    0040.0128 *C CLOCK SYSTEM            All clocks have failed
    2109.0331 *C SCCP SYSTEM             SCCP is not available
    2110.0292 *C GLS SYSTEM              GLS is not available
    0009.0041 *C LSMS Connection  A1     LNP DB Maintenance Required
    0056.0356 *C LSMS SYSTEM             LSMS unavailable
    0041.0197 *C CLOCK SYSTEM            All High Speed Clocks have failed
    0056.0356 *C LSMS SYSTEM             LSMS unavailable
    0041.0197 *C CLOCK SYSTEM            All High Speed Clocks have failed
    3102.0435 *C LNP SYSTEM              LNP Subsystem is disabled
    3539.0181 *C NDC SYSTEM              NDC Subsystem is not available
    0036.0455 *C EIR SYSTEM              EIR Subsystem is not available
    0019.0236 *C T1PORT 1301,1           REPT-T1F:FAC-T1   LOS failure
    4521.0370 *C MPS A                   Critical Platform Failure(s)
    0045.0469 *C EROUTE SYSTEM           All STC cards Unavailable
    0036.0455 *C EIR SYSTEM              EIR Subsystem is not available
    0915.0541 *C RTD SYSTEM              MSU cksum error threshold exceeded 
    0002.0520 *C                         Frame power usage reached LVL3
    0056.0528 *C GFLEX SERVICE           Service is not available
    0056.0528 *C GPORT SERVICE           Service is not available
    0056.0528 *C MNP SERVICE             Service is not available
    0044.0534 *C RTX    001-101-001      RTX is prohibited
    0916.0565 *C ATINPQ SYSTEM           ATINPQ Subsystem is not available
    0150.0483 *C DEIR SYSTEM             DEIR System is not available
    0160.0120 *C ENUM SYSTEM             ENUM System is not available
    7470.0630 ** TA - throt2             Throttle Threshold - exceeded

    Command Completed. 
;
rept-stat-trbl:display=act:level=majr

    rlghncxa03w 02-03-07 09:50:17 EST  EAGLE 30.0.0
    Searching devices for alarms... 
;
    rlghncxa03w 02-03-07 09:50:17 EST  EAGLE 30.0.0
    SEQN UAM  AL DEVICE    ELEMENT       TROUBLE TEXT
    3540.0203 ** SLK 1201,A  lsn1        REPT-LKF: lost data
    3541.0203 ** SLK 1201,B  lsn4        REPT-LKF: lost data
    3542.0203 ** SLK 1202,A  lsn2        REPT-LKF: lost data
    3543.0203 ** SLK 1202,B  lsn4        REPT-LKF: lost data
    3544.0202 ** SLK 1203,A  lsn3        REPT-LKF: HWP -too many link interrupts
    3545.0202 ** SLK 1203,A1 lsn4        REPT-LKF: HWP -too many link interrupts
    3545.0202 ** SLK 1203,B2 lsname489+  REPT-LKF: HWP -too many link interrupts
    0022.0318 ** LSN lsn2                REPT-LKSTO: link set prohibited
    0023.0318 ** LSN lsn3                REPT-LKSTO: link set prohibited
    0010.0318 ** LSN lsn4                REPT-LKSTO: link set prohibited
    Command Completed. 
;
rept-stat-trbl:display=inhb:level=majr
rlghncxa03w 02-03-07 09:50:17 EST  EAGLE 30.0.0
    Searching devices for alarms... 
;
    rlghncxa03w 02-03-07 09:50:17 EST  EAGLE 30.0.0
    SEQN UAM  AL DEVICE    ELEMENT       TROUBLE TEXT
    0021.0318I** LSN lsn1                REPT-LKSTO: link set prohibited
   Command Completed. 
;

This example shows output when the display=timestamp parameter is specified.

rept-stat-trbl:display=timestamp

    rlghncxa03w 04-04-07 09:50:17 EST  EAGLE 31.6.0
    Searching devices for alarms... 
;

    tekelecstp 04-04-07 09:50:17 EST  EAGLE 31.6.0
    SEQN UAM  AL DEVICE    ELEMENT       TROUBLE TEXT
    0003.0048  * TERMINAL    1           Terminal failed
                 04-1-27  15:19:25
    0004.0048  * TERMINAL    2           Terminal failed
                 04-1-27  15:19:25
    0005.0048  * TERMINAL    4           Terminal failed
                 04-1-27  15:19:25
    0006.0002  * GPL SYSTEM EOAM         Card is not running approved GPL
                 04-1-27  15:19:25
    0007.0176  * SECULOG 1116            Stdby security log -- upload required
                 04-1-27  15:19:25
    0008.0013 ** CARD 1103 VSCCP         Card is isolated from the system
                 04-15-27  15:19:25
    0009.0438 *C SYSTEM                  Degraded Mode, Invalid OAM HW config
                 04-1-27  15:19:27
    0010.0331 *C SCCP SYSTEM             SCCP is not available
                 04-1-27  15:19:25
    Command Completed. 
;
rept-stat-trbl
eagle2 16-03-03 14:17:40 EST  EAGLE5 46.3.0.0.0 
    Searching devices for alarms...
;
    eagle2 16-03-03 14:17:40 EST  EAGLE5 46.3.0.0.0
    SEQN UAM  AL DEVICE    ELEMENT       TROUBLE TEXT 
    7374.0048  * TERMINAL    3           Terminal failed
    7375.0048  * TERMINAL    4           Terminal failed
    7376.0048  * TERMINAL    5           Terminal failed
    7377.0048  * TERMINAL    6           Terminal failed
    7378.0048  * TERMINAL    7           Terminal failed
    7379.0048  * TERMINAL    8           Terminal failed
    7380.0048  * TERMINAL    9           Terminal failed
    7381.0048  * TERMINAL   10           Terminal failed
    7382.0048  * TERMINAL   11           Terminal failed
    7383.0048  * TERMINAL   12           Terminal failed
    7384.0048  * TERMINAL   13           Terminal failed
    7385.0048  * TERMINAL   15           Terminal failed
    7386.0048  * TERMINAL   16           Terminal failed
    5088.0176  * SECULOG 1114            Stdby security log -- upload required
    8546.0632  * TA - throt2             Alarm Threshold - exceeded
    7387.0013 ** CARD 1215 IPSG          Card is isolated from the system
    7388.0441 ** CARD 1105 SCCPHC        Incorrect MBD - CPU
                 HW VERIFICATION CODE:   180
    7389.0084 ** DLK 1105,A   SCCP       IP Connection Unavailable
    7391.0084 ** DLK 1105,B   SCCP       IP Connection Unavailable
    7392.0539 ** ENET 1215,A             Ethernet Interface Down
    7393.0539 ** ENET 1105,A             Ethernet Interface Down
    7394.0539 ** ENET 1105,B             Ethernet Interface Down
    7395.0313 *C DPC    11007            DPC is prohibited
    7396.0529 *C GPORT SERVICE           Service is disabled
    
    Command Completed. 
;

Legend

In the AL column:

  • *—Minor Alarm
  • **—Major Alarm
  • *C—Critical Alarm
  • I—Inhibited Alarm