4.598 rtrv-trbl

Use this command to display detailed information for one or more troubles that are currently logged into the system.

Parameters

loc (mandatory)
The address of the card that is running the OAM from which logged trouble reports are to be displayed.
Range:
1113, 1115
mode (optional)
Display mode
Range:
c
Continuous mode; shows troubles already logged and new troubles as they occur.
m
Manual mode; shows troubles on demand only
Default:
c
num (optional)
Indicates how many troubles to display.
Range:
1 - 1023
Default:
99

Example

rtrv-trbl:loc=1113:num=2

Dependencies

At least one trouble must be in the trouble log, or the command is rejected.

Only one rtrv-trbl or rtrv-obit command can be in progress at a time.

If the mode parameter is specified without the num parameter, the entire log is displayed.

The card specified by the loc parameter must be 1113 or 1115.

If the loc parameter specifies the card that is running the standby OAM, that card must be available.

The num parameter must be between 1 - 1023.

Notes

When a trouble is generated in the system, it is logged into the RAM storage area of the active OAM. Each OAM can store up to 1023 troubles in a queue. If the OAM resets, logged troubles are lost.

Output

The output from this command should be reviewed with a member of the Customer Care Center. See the "My Oracle Support (MOS)" section in Chapter 1 of this reference guide.

rtrv-trbl:loc=1113:num=2

    rlghncxa03w 03-03-07 08:47:43 EST  EAGLE 31.3.0
    Card 1113  Module 0000  Mod_loc 0  Class 0000  Severity 0
    Report Date:00-00-00  Time:00:00:00

    rlghncxa03w 03-03-07 08:47:43 EST  EAGLE 31.3.0
    Card 1108  Module 8001  Mod_loc 6  Class 100A  Severity 1
    Report Date:03-03-04  Time:09:19:59 
;