4.438 rept-stat-trm
Use this command to display the status of the terminal ports. The device primary, secondary, and associated state information is displayed along with the terminal identification number.
Parameters
Example
rept-stat-trm
rept-stat-trm:trm=5
rept-stat-trm:trm=17
Dependencies
No other rept-stat-xxx
command can be in progress when this command is entered.
Notes
None
Output
This example shows output when the IP User Interface is not turned on:
rept-stat-trm
tekelecstp 03-03-31 13:02:16 EST EAGLE 30.0.0
TRM PST SST AST
1 IS-NR Active -----
2 IS-NR Active -----
3 IS-NR Active -----
4 IS-NR Active -----
5 IS-NR Active -----
6 IS-NR Active -----
7 IS-NR Active -----
8 IS-NR Active -----
9 IS-NR Active -----
10 IS-NR Active -----
11 IS-NR Active -----
12 IS-NR Active -----
13 IS-NR Active -----
14 IS-NR Active -----
15 IS-NR Active -----
16 IS-NR Active -----
Command Completed.
;
This example shows output when the IP User Interface is turned on and 3 IPSM cards are in the system:
rept-stat-trm
rlghncxa03w 04-01-07 09:50:17 EST EAGLE 31.3.0
TRM PST SST AST
1 IS-NR Active -----
2 IS-NR Active -----
3 IS-NR Active ALMINH
4 IS-NR Active -----
5 OOS-MT-DSBLD Manual -----
6 IS-NR Active -----
7 IS-NR Active -----
8 IS-NR Active -----
9 IS-NR Active -----
10 IS-NR Active -----
11 IS-NR Active ALMINH
12 IS-NR Active -----
13 IS-NR Active -----
14 OOS-MT Fault -----
15 IS-NR Active -----
16 IS-NR Active -----
17 IS-NR Active -----
18 IS-NR Active -----
19 IS-NR Active -----
20 OOS-MT-DSBLD Manual -----
21 IS-NR Idle -----
22 IS-NR Idle -----
23 IS-NR Idle -----
24 IS-NR Idle -----
25 IS-NR Active -----
26 IS-NR Active -----
27 IS-NR Active -----
28 IS-NR Active -----
29 IS-NR Active -----
30 IS-NR Active -----
31 IS-NR Active -----
32 IS-NR Active -----
33 IS-NR Active -----
34 IS-NR Active -----
35 IS-NR Active -----
36 IS-NR Active -----
37 IS-NR Active -----
38 IS-NR Active -----
39 IS-NR Active -----
40 IS-NR Active -----
Command Completed.
;
rept-stat-trm:trm=5
rlghncxa03w 04-01-07 09:50:17 EST EAGLE 31.3.0
TRM PST SST AST
5 IS-NR Active -----
Command Completed.
;
Legend
- TRM—ID of the terminal port
- PST—Primary state of the terminal ports. Possible values are described in Possible Values for PST/SST/AST.
- SST—Secondary state of the terminal ports. Possible values are described in Possible Values for PST/SST/AST.
- AST—Associated state of the terminal ports. Possible values are described in Possible Values for PST/SST/AST.