4.445 rmv-trm

Use this command to set the primary state of a serial port to OOS-MT-DSBLD (Out-of-Service-Maintenance-Disabled), and to set the secondary state to MANUAL. The serial port is not available to perform service functions. There is no outgoing traffic from the serial port; all incoming traffic is ignored.

Parameters

trm (mandatory)
The ID of the serial port to be inhibited.
Range:
1 - 40
force (optional)
This parameter forces the removal of the terminal, even if it is the last in-service SEAS terminal available.
Range:
yes
no
Default:
no

Example

rmv-trm:port=5

rmv-trm:trm=1:force=yes

Dependencies

No other action command can be in progress when this command is entered.

The IP User Interface feature must be enabled before terminal ports 17 through 40 can be specified as values for the trm parameter.

The force=yes parameter must be specified to inhibit the last in-service SEAS terminal.

Notes

When removing a terminal that has already been removed, a warning message is echoed to the scroll area but no action is taken.

MTT 2731 was deleted for 42.0, PR 158511.

Output

rmv-trm

    rlghncxa03w 04-01-07 11:11:28 EST  EAGLE 31.3.0
    Inhibit message sent to terminal 
;
rmv-trm:trm=17:force=yes

    tekelecstp 07-01-11 13:42:16 EST  EAGLE 37.5.0
    Inhibit message sent to terminal 
;