rst-dstn

Use this command to request that the circular routing status for the specified destination be reset (turned OFF). The destination that is specified can be a full point code (FPC), a cluster point code (for example, ni-nc-*), or an x-list point code. The system clears the circular routing status for the specified destination and then clears any outstanding circular routing alarm for the destination.

Parameters

Note:

See Point Code Formats and Conversion for a detailed description of point code formats, rules for specification, and examples.

dpc (mandatory)

ANSI destination point code with subfields network indicator-network cluster-network cluster member (ni-nc-ncm). The prefix subfield indicates a private point code (prefix-ni-nc-ncm).

Synonym:

dpca

Range:

p-, 000-255, *

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—p-

The asterisk value (*) is not valid for the ni subfield.

When chg-sid:pctype=ansi is specified, ni = 000 is not valid.

When chg-sid:pctype=ansi is specified, nc = 000 is not valid if ni = 001–005.

When chg-sid:pctype=ansi is specified, nc = 000 is valid if ni = 006–255.

The point code 000-000-000 is not a valid point code.

dpc/dpca/dpci/dpcn/dpcn24/dpcn16 (mandatory)

dpci (mandatory)

ITU international destination point code with subfields zone-area-id. The prefix subfield indicates a spare point code, private point code, or private and spare point code (prefix-zone-area-id).

Range:

s-, p-, ps-, 0-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—s-, p-, ps

zone—0-7

area—000-255

id—0-7

The point code 0-000-0 is not a valid point code.

dpcn (mandatory)

ITU national destination point code in the format of a 5-digit number (nnnnn); or 2, 3, or 4 numbers (members) separated by dashes (m1-m2-m3-m4) as defined by the chg-stpopts:npcfmti flexible point code option. A group code must be specified when the ITUDUPPC feature is turned on (nnnnn-gc, m1-m2-m3-m4-gc). The prefix subfield indicates a spare point code, private point code, or private and spare point code (prefix-nnnnn, prefix-nnnnn-gc, prefix-m1-m2-m3-m4, prefix-m1-m2-m3-m4-gc).

Range:

s-, p-, ps-, 0-16383, aa-zz

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—s-, p-, ps

nnnnn—0-16383

gc—aa-zz

m1-m2-m3-m4—0-14 for each member; values must sum to 14

dpcn24 (mandatory)

24-bit ITU national point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp). The prefix subfield indicates a private point code (prefix-msa-ssa-sp).

Range:

p-, 000-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix—p

msa—000–255

ssa—000–255

sp—000–255

dpcn16 (mandatory)

16-bit ITU national point code with subfields unit number sub number area main number area (un-sna-mna). The prefix subfield indicates a private point code (prefix-un-sna-mna).

Range:: p--, 000---127; Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).; prefix---p; un---000---127; sna---000---15; mna---000---31

force (optional)

This parameter specifies whether to reset all dynamic data for the specified route in the Route table to the initial values.

Range:

yes: reset the data
no: do not reset the data

Default:

no

Example

rst-dstn:dpc=1-2-*

rst-dstn:dpc=20-2-5

rst-dstn:dpc=p-20-2-5

rst-dstn:dpc=20-2-5:force=yes

rst-dstn:dpcn16=125-2-10

Dependencies

The specified DPC must be either provisioned or an x-list entry.

The destination address must be a full point code or a cluster point code specified as ni-nc-*. A DPC as ni-nc-** or ni-nc-*** cannot be specified.

Notes

None.

Output

rst-dstn:dpc=20-2-5:force=yes


    rlghncxa03w 09-03-29 16:40:40 EST  EAGLE 41.0.0
    Destination reset command sent to SNM (scroll area)

    rlghncxa03w 09-03-29 16:40:40 EST  EAGLE 41.0.0
    Command Completed. 
;

rst-dstn:dpcn16=1-14-0


    tekelecstp 02-01-13 00:58:40 MST  UNKNOWN 45.1.0-64.69.1
    rst-dstn:dpcn16=1-14-0
    Command entered at terminal #17.
;

Command Accepted - Processing
    tekelecstp 02-01-13 00:58:40 MST  UNKNOWN 45.1.0-64.69.1
    Info: DPC is not in circular routing state.
    Reset destination command sent to all MTP cards.
;
    tekelecstp 02-01-13 00:58:40 MST  UNKNOWN 45.1.0-64.69.1
    Command Completed.
;
Command Executed

4.446 rst-dstn