4.456 rtrv-atinpqopts

Use this command to retrieve the data that is used for ATI number conditioning.

Parameters

This command has no parameters.

Example

rtrv-atinpqopts

Dependencies

The ATINP feature must be enabled before this command can be entered.

The EGLEOPTS table is corrupt or cannot be found.

Output

This example shows output with default ATINPQ options:

rtrv-atinpqopts

    tekelecstp 12-01-04 07:53:46 EST  EAGLE 45.0.0
    
    ATINPQ OPTIONS
    ---------------------
    ATIACKIMSI      = NONE
    ATIACKMSISDN    = MSISDN
    ATIACKRN        = RN
    ATIDFLTRN       = NONE
    ATIDLM          = NONE
    ATINPTYPE       = ANY
    ENTITYLEN       = NONE
    SNAI            = INTL
    SPORTTYPE       = GSM
    ATISUPPLOCINFO  = OFF
    VLRNUMLEN       = 40
    ATIACKVLRNUM    = RNSPMSISDN

;

This example shows output when the Location Information request is supported:

rtrv-atinpqopts
    tekelecstp 12-01-25 12:22:38 EST  EAGLE 45.0.0

    ATINPQ OPTIONS
    -----------------------
    ATIACKIMSI      = GRN
    ATIACKMSISDN    = GRNDLMMSISDN
    ATIACKRN        = GRNDLMRNSP
    ATIDFLTRN       = NONE
    ATIDLM          = 454555817324228
    ATINPTYPE       = ANY
    ENTITYLEN       = NONE
    SNAI            = NAI
    SPORTTYPE       = NONE
    ATISUPPLOCINFO  = ON
    VLRNUMLEN       = 40
    ATIACKVLRNUM    = RNSPMSISDN
    
;

Legend

  • ATIACKIMSI—IMSI parameter for ACK response message
  • ATIACKMSISDN—MSISDN parameter for ACK response message
  • ATIACKRN—Routing Number format
  • SNAI—NAI of the incoming MSISDN digits
  • ATIDLM—Outbound message delimiter
  • ATIDFLTRN—Default Routing Number
  • ATINPTYPE—Number Portability Type
  • SPORTTYPE—Service Portability Type
  • GRN—Generic Routing Number
  • ATISUPPLOCINFO—Support ATINP query with LocationInformation request if ATINP feature is activated
  • VLRNUMLEN—Maximum number of digits that could be encoded as VLR-number in ATI ACK response message
  • ATIACKVLRNUM— VLR-number format