4.472 rtrv-deiropts
Use this command to retrieve S13/S13' diameter EIR configuration options.
Parameters
This command has no input parameters.
Example
rtrv-deiropts
Dependencies
The S13/S13' EIR Feature must be enabled before retrieving Diameter EIR configuration options.
The DEIROPTS table should be accessible.
Output
This example shows output with default DEIR options.
rtrv-deiropts
tekelecstp 13-03-16 11:43:52 EST EAGLE 45.1
rtrv-deiropts
Command entered at terminal #4.
DEIRGRSP = off DEIRRSPTYPE = type1
DEIRIMSICHK = off CONGERR = 3004
VENDID = 0 APPLID = 16777252
PRODUCT = none DPR Cause = Do not want to talk(2)
DEIRIMSISCRN = off DEIRLOGWL = off
DEIRDFLTIMSISCRN = off DEIRDFLTIMSILKUP = range
DEIRDFLTIMSIRESP = whitelist
This example shows output with provisioned DEIR options.
rtrv-deiropts
tekelecstp 13-03-16 11:43:52 EST EAGLE 45.1
rtrv-deiropts
Command entered at terminal #4.
DEIRGRSP = off DEIRRSPTYPE = type1
DEIRIMSICHK = off CONGERR = 3004
VENDID = 4004 APPLID = 16777252
PRODUCT = abc DPR Cause = Busy(1)
DEIRIMSISCRN = off DEIRLOGWL = off
DEIRDFLTIMSISCRN = off DEIRDFLTIMSILKUP = both
DEIRDFLTIMSIRESP = blacklist
Legend
- DEIRGRSP -- S13/S13' EIR Global Response Type. The Global Response Type is used to override the response that is sent back to the MME.
- DEIRRSPTYPE -- S13/S13' EIR Response Type. The Response Type is used to determine how the lists are to be searched.
- DEIRIMSICHK -- Indicates whether IMSI will be used when determining if an IMEI is to be "black" listed or not.
- CONGERR -- It displays the diameter response to be sent by DEIRHC card at the time of card congestion.
- VENDID -- S13 local Vendor ID. All the outgoing messages that require Vendor ID in Vendor-Specific-Application-ID AVP will use this configured value.
- APPLID -- Authentication Application ID. The application ID configured should match with the Auth-Application-Id (AVP Code 258) value in Vendor-Specific-Application-ID AVP. This application ID is fixed and cannot be changed.
- PRODUCT -- It contains the vendor-assigned name for the product. All the outgoing messages that require Product name AVP will use this configured value.
- DPR Cause -- It is a Disconnect Cause in DPR (Disconnect Peer Request) message sent by the DEIRHC card.
- DEIRIMSISCRN -- Indicates whether the IMSI Screening for Diameter Equipment Identity Register (EIR) will be done before the IMEI check.
- DEIRLOGWL -- Indicates whether the white list logging for Diameter Equipment Identity Register (EIR) will be on.
- DEIRDFLTIMSISCRN -- Indicates whether the default IMSI Screening for Diameter Equipment Identity Register (EIR) will be on.
- DEIRDFLTIMSILKUP -- Indicates the order of IMEI table lookup for default IMSI screening.
- DEIRDFLTIMSIRESP -- Indicates the default IMEI status for default IMSI screening.