4.473 rtrv-dlk

Use this command to show the parameters of a TCP/IP data link.

Parameters

ipaddr (optional)
The TCP/IP data link’s IP address. This is a TCP/IP address expressed in standard dot notation. IP addresses consist of the system’s network number and the machine’s unique host number. An example IP address is 192.126.100.5, where 192.126.100 is the network number and 5 is the machine’s host number.
Range:
1-223, 0-255

4 numbers separated by dots

1-223—first number

0–255—the other three numbers

Default:
Display all.
loc (optional)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
Default:
All TCP/IP data links are shown.

Example

rtrv-dlk

rtrv-dlk:loc=1201

rtrv-dlk:ipaddr=193.4.201.34

Dependencies

The loc and ipaddr parameters cannot be specified in the same command.

The shelf and card must be equipped.

The specified card must have a TCP/IP data link assigned to it.

Notes

None

Output

For these cards, the value of the auto parameter is defaulted to no, and the value of the duplex parameter is defaulted to half.

For these cards, if the auto=yes parameter is specified, then the values of speed and duplex parameters are not shown.

rtrv-dlk

    tekelecstp 07-02-06 11:12:47 EST  EAGLE 37.0.0
    LOC   IPADDR            LINK SPEED  DUPLEX  AUTO
    1101  192.168.63.34     100Mbit     FULL    NO 
    1103  192.168.63.11     10Mbit      HALF    NO
    1107  192.168.63.12     ------      ----    YES    
    1201  192.168.63.13     10Mbit      HALF    NO     
    1203  192.168.63.14     10Mbit      HALF    NO     
;
rtrv-dlk:loc=1101

    tekelecstp 07-02-01 14:09:13 EST  EAGLE 37.0.0
    LOC   IPADDR            LINK SPEED  DUPLEX  AUTO
    1101  192.168.63.34     100Mbit     FULL    NO 
;
rtrv-dlk:ipaddr=192.168.63.11

    tekelecstp 07-02-01 14:19:14 EST  EAGLE 37.0.0
    LOC   IPADDR            LINK SPEED  DUPLEX  AUTO
    1103  192.168.63.11     10Mbit      HALF    NO 
;

This example shows the output when the specified IP address is not assigned to a TCP/IP data link:

rtrv-dlk:ipaddr=193.4.201.28

   tekelecstp 07-02-01 14:19:14 EST  EAGLE 37.0.0
   LOC   IPADDR            LINK SPEED  DUPLEX  AUTO
   IPADDR not assigned to a TCP/IP Link. 
;

This example shows the output when there are no TCP/IP data links in the database.

rtrv-dlk

    tekelecstp 07-02-02 14:19:14 EST  EAGLE 37.0.0
    LOC   IPADDR            LINK SPEED  DUPLEX  AUTO
    No TCP/IP Links are defined in the database. 
;

This example shows the output when the specified IP address is assigned to a TCP/IP node instead of a TCP/IP data link:

rtrv-dlk:ipaddr=193.4.201.63

    tekelecstp 07-02-01 12:12:10 EST  EAGLE 37.0.0
    LOC   IPADDR            LINK SPEED  DUPLEX  AUTO
    IPADDR assigned to a TCP/IP Node. 
;

Legend

  • IPADDR—IP address associated with the interface on the data link
  • LOC—Card location containing the data link
  • LINK SPEED—Bandwidth for the interface in megabits per second, 10 or 100
  • AUTO—Whether or not to automatically determine duplex and speed. If the value is yes, then duplex and speed are automatically determined. If the value is no, then duplex and speed are not automatically determined.
  • DUPLEX—Mode of operation of the interface