4.404 rept-stat-dlk

Use this command to show the status of the TCP/IP data links. The secondary state (SST) of the TCP/IP data links shows whether the link is available, unavailable, or manually removed from service.

Parameters

loc (optional)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
Default:
All data links are shown.

Example

rept-stat-dlk

rept-stat-dlk:loc=1104

Dependencies

No other rept-stat-xxx command can be in progress when this command is entered.

The ACM is the only valid card type for this command.

The specified card must have a TCP/IP data link assigned to it.

The card location, frame, shelf, or slot must be within the allowed range.

The data link must be equipped in the database.

A card location that is valid and defined in the database must be specified.

Notes

None

Output

rept-stat-dlk 

    rlghncxa03w 10-01-27 17:00:36 EST  EAGLE 42.0.0
    DLK             PST          SST       AST
    1104            IS-NR        Active    ----
    1206            IS-NR        Active    ALMINH
    Command Completed. 
;
rept-stat-dlk:loc=1104 

    rlghncxa03w 10-01-27 17:00:36 EST  EAGLE 42.0.0
    DLK             PST          SST       AST
    1104            IS-NR        Active    ----
      ALARM STATUS       = No Alarms.
    Command Completed. 
;

Legend

Related Topics