4.623 tst-dlk
Use this command to test the specified TCP/IP data link. The TCP/IP data link is tested with an ethernet test that is an echo test type called ping.
Parameters
- loc (mandatory)
- The card location as stenciled on the shelf of the system.
- Range:
- 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
- ipaddr (optional)
- The IP address of the remote host. This is a TCP/IP address expressed in standard dot notation. IP addresses consist of the system’s network number and the machine’s unique host number. An example IP address is 192.126.100.5, where 192.126.100 is the network number and 5 is the machine’s host number.
Example
tst-dlk: loc=1206:type=ping
Dependencies
No other action command can be in progress when this command is entered.
The shelf and card must be equipped.
The specified card must have a TCP/IP data link assigned to it.
If a test repeat count (rc) is not entered, the test is not repeated.
If a data link test is in progress, another data link test cannot be started.
The card location, frame, shelf, or slot must be within the allowed range.
A card location that is valid and defined in the database must be specified.
The ipaddr parameter must specify a valid IP address.
Notes
None
Output
tst-dlk:loc=1206:type=ping
rlghncxa03w 03-11-27 17:00:36 EST EAGLE 31.3.0
Command Accepted: Test Link message is sent.
rlghncxa03w 03-11-27 17:00:36 EST EAGLE 31.3.0
Command Completed.
rlghncxa03w 03-11-27 17:00:36 EST EAGLE 31.3.0
1310.1132 CARD 1206 INFO DLK ping test completed
TESTS REQUESTED= 1 PASSED COUNT= 1 FAILED COUNT= 0
AVR RND TRIP= 10 MAX RND TRIP=10 MIN RND TRIP=10
HOST IPADDR=198.089.040.069
;