4.496 rtrv-gtt
Use this command to show one or more entries from the GTT Data and the Translation Type tables. The report contains two records (the percentage full and number-of-cells-used field) that give the total entries in the GTT table without regard to the type parameter specified.
Note:
If the EGTT feature is turned on, then the GTT Selector (ent/chg/dlt/rtrvgttsel), GTT Set
(ent/dlt/rtrv-gttset), and GTA
(ent/chg/dlt/rtrvgta) commands replace the Translation Type
(ent/dlt/rtrv-tt) and Global Title Translation
(ent/chg/dlt/rtrv-gtt) commands. It is not recommended to
run
ent/dlt/rtrv-tt & ent/chg/dlt/rtrv-gtt commands
as it may cause the advance GTA fields of GTT entry to be reset to the default
values.
Parameters
Note:
See Point Code Formats and Conversion for a detailed description of point code formats, rules for specification, and examples.- cggtmod (optional)
- Calling party global title modification indicator. This parameter displays all translation entries that have the specified value of the calling party GT modification indicator.
- egta (optional)
- End global title address. This parameter specifies
the end of a range of global title digits.
- Range:
- 1-21 digits
If the Hex Digit Support for GTT feature is not enabled and on, the range is 1 - 21 decimal digits; valid digits are 0-9.
If the Hex Digit Support for GTT feature is enabled and on, the range is 1 - 21 hexadecimal digits; valid digits are 0-9, a-f, A-F.
- Default:
- If the gta parameter is specified, the egta parameter default value is the specified gta parameter value.
- force (optional)
- This parameter allows the user to display more than 1000 entries. This parameter is used to prevent inadvertent displays of extremely large amounts of information, which could take many hours.
- gta (optional)
- Global title start address. The beginning of a
range of global title digits.
- Range:
- 1-21 digits
If the Hex Digit Support for GTT feature is not enabled and on, the range is 1 - 21 decimal digits; valid digits are 0-9.
If the Hex Digit Support for GTT feature is enabled and on, the range is 1 - 21 hexadecimal digits; valid digits are 0-9, a-f, A-F.
- Default:
- The first GTT entry for the given translation type.
- loopset (optional)
- SCCP loopset name. This parameter retrieves translation entries that are associated with the specified loopset.
- mrnset (optional)
- MRN set ID. This parameter retrieves GTT information for a specified Mated Relay Node set.
- pc (optional)
- ANSI point code with subfields
network
indicator-network cluster-network cluster member (ni-nc-ncm). The
prefix
subfield indicates a private point code (prefix-ni-nc-ncm).
- Synonym:
- pca
- Range:
- p-, 000-255
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
prefix—p-
When
chg-sid:pctype=ansiis specified, ni = 000 is not valid.When
chg-sid:pctype=ansiis specified, nc = 000 is not valid if ni = 001-005.When
chg-sid:pctype=ansiis specified, nc = 000 is valid if ni = 006-255.The point code 000-000-000 is not a valid point code.
- Default:
- Display all
- pci (optional)
- ITU international point code with subfields zone-area-id. The prefix subfield indicates a spare point code, private point code, or private and spare point code (prefix-zone-area-id).
- pcn (optional)
- ITU national point code in the format of a 5-digit
number (nnnnn); or 2, 3,
or 4 numbers (members) separated by dashes (m1-m2-m3-m4) as defined by
the
chg-stpopts:npcfmtiflexible point code option. A group code must be specified when the ITUDUPPC feature is turned on (nnnnn-gc, m1-m2-m3-m4-gc). The prefix subfield indicates a spare point code, private point code, or private and spare point code (prefix-nnnnn, prefix-nnnnn-gc, prefix-m1-m2-m3-m4, prefix-m1-m2-m3-m4-gc).
- pcn24 (optional)
- 24-bit ITU national point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp). The prefix subfield indicates a private point code (prefix-msa-ssa-sp).
- pctype (optional)
- Point code type. This parameter retrieves a single type of point code among mixed types of point code provisioned for a Translation Type.
- type/typea/typei/typen/typen24/typeis/typens (optional)
- Translation type identifies the translation type
and network type. This parameter is the decimal representation of the 1-byte
field used in SS7.
The type and typea parameters specify an ANSI network.
The typei parameter specifies an ITU-international network.
The typen parameter specifies an ITU-national network.
The typen24 parameter specifies a 24-bit ITU-national network.
The typeis parameter specifies an ITU-international spare network.
The typens parameter specifies an ITU-national spare network.
A translation type numeric value may be entered as ANSI type (type or typea) and as an ITU type (typei/typen/typen24/typeis/typens). However, they are separate entities.
The point code domain translation types for GTT are handled by the EAGLE protocol processing as either ANSI or ITU; therefore, ITU applies to ITU-I, ITU-I spare, ITU-N, ITU-N spare, and ITU-N24.
Example
rtrv-gtt:type=5:ttn=lidb1:gta=919555
rtrv-gtt:type=5:gta=919555
rtrv-gtt:type=5:gta=919555:num=2500:force=yes
rtrv-gtt:typen24=0
rtrv-gtt:typei=7:pctype=ansi
rtrv-gtt:typen=106:pctype=itui
rtrv-gtt:type=55:pctype=itun
rtrv-gtt:type=9:pctype=itun24
rtrv-gtt:typei=4:pci=s-1-24-1
rtrv-gtt:typen=3:pcn=s-124
rtrv-gtt:ttn=tbla
rtrv-gtt:ttn=tbla:mapset=1
rtrv-gtt:type=4:cggtmod=yes
rtrv-gtt:ttn=ituset:gtmodid=set1
rtrv-gtt:typens=5:gta=123456
rtrv-gtt:typeis=5:gta=123456
Dependencies
The ANSI/ITU SCCP Conversion feature must be enabled before the pctype parameter can be specified.
If the
pcn parameter is specified, its
format must match the format that was assigned with the
chg-stpopts:npcfmti
parameter.
The first character of the translation name must be a letter.
The value of the tt parameter must exist in the Translation Type table.
The value specified for the
tt parameter must correspond to a
value of the
type/typea/typei/typen/typen24/typeis/typens parameter
(see the
ent/chg-gtt
command).
If the value of the num parameter exceeds 1000, then the force=yes parameter must be specified.
The type or ttn parameter must be specified.
The value of the pc/pca/pci/pcn/pcn24 parameter must be a full point code.
If the egta parameter is specified, the gta parameter must be specified.
If the system is defined as an ANSI system, the pc/pca parameter must be specified as a valid ANSI point code.
The ANSI/ITU SCCP Conversion feature must be enabled before a translated point code and a translation type in different network types can be specified.
The number of digits in the specified
gta parameter must be at least the
number of digits provisioned for the given translation type. If the VGTT
(variable length GTT) feature is turned on, there can be up to 10 GTA lengths
per translation type. When the
ent-gtt command is entered to create
entries, the software keeps track of the lengths and allows only ten different
lengths.
The value of the tt parameter must not be defined as an alias.
The Flexible GTT Load Sharing feature must be enabled before the mapset parameter can be specified.
The specified MAP set must exist in the database.
The Hex Digit Support for GTT feature must be enabled and on before hexadecimal digits can be specified for the gta and egta parameters.
The value of the num parameter must not exceed the maximum table size.
The length of the egta parameter must equal the length of the gta parameter.
The value of the egta parameter must be greater than the value of the gta parameter.
If the tt parameter is not specified, then the value of the ttn parameter must match the value of a tt parameter in the STP database.
The value of the gta parameter must exist.
The SCCP Loop Detection feature must be enabled before the loopset parameter can be specified.
The value of the loopset parameter must already exist in the database.
The Loopset table is corrupt or cannot be found.
The Flexible GTT Load Sharing feature must be enabled before the mrnset parameter can be specified.
At least one entry must be provisioned in the MRN table for the MRN set that is specified by the mrnset parameter.
The AMGTT feature or the AMGTT CgPA Upgrade feature must be turned on before the cggtmod parameter can be specified.
The mapset and mrnset parameters cannot be specified together in the command.
The GTT set associated with the translation type
specified by the
ttn parameter must have a set type
of
cdgta (see the
ent-gttset
command).
The value specified for the gtmodid parameter must already exist in the GTMOD table.
The GTMOD table is corrupt or cannot be found.
The ttn=none parameter cannot be specified.
The network domain of the translation type specified by
the
ttn parameter cannot be CROSS (see
the
ent-gttset
command).
Notes
If the
rtrv-gtt
command is entered with only the
gta parameter, a match would be an
entry containing the same number of digits, or more digits, for the translation
type. For example, if
gta=8005556666 is specified, the
six-digit translation type
800555 would be a
match. If the VGTT feature is turned on and the
egta parameter is specified, all
matching entries regardless of length are displayed.
This command can be canceled using the
F9 function key
or the
canc-cmd
command. See
canc-cmd
for more information.
If you do not know either the translation type or the
translation type name, use the
rtrv-tt
command to obtain type and name.
Due to the size of these tables (up to 270,000 possible entries), a limit (65,535) is placed on the number of entries that can be printed at one time.
In this command, only ITU-international and ITU national point codes support the spare point code subtype prefix (s-) and the private and spare point code subtype prefix (ps-). All of the point code types support the private (internal) point code subtype prefix (p-).
The number of entries to be shown (the num parameter) can be specified for any valid combination of parameters.
If the gta parameter is not specified, then the first entry in the global title translation table that corresponds to the translation type is the first entry shown.
If the num and gta parameters are not specified, then up to 20 entries are shown.
If the gta parameter is specified, but the num parameter is not specified, then only one entry is shown.
If the num parameter is specified, then the number of entries shown is the lesser of the number of entries in the table from the defined starting point to the end, or the value of the num parameter.
If the gta and egta parameters are specified, then the entry that matches the gta parameter, or is the nearest entry below the gta parameter, is the first entry shown for the specified range.
The
rtrv-gtt
command can retrieve only CdGTA entries that were
provisioned through GTA commands when the OBSR or FLOBR feature is turned on.
Output
rtrv-gtt:type=10:num=65535:force=yes
tekelecstp 10-02-04 11:43:04 EST EAGLE 42.0.0
TYPEA TTN NDGT
3 c800 10
GTT table is (9 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
9195551212 9195551212 DPCSSN SSN 008-001-001
SSN=222 GTMODID=setntt1
8005550000 8005551999 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
8005552000 8005553999 DPC GT 001-254-255
SSN=255 GTMODID=setntt2
8005554000 8005555999 DPCNGT GT 001-254-255
SSN=255 GTMODID=---------
8005556000 8005557999 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
8005558000 8005559999 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
9762428487 9762428487 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
9766423277 9766423277 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
9769388928 9769388928 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
Command Retrieved 9 Entries
;
rtrv-gtt:type=10:dpc=8-1-1:ssn=222:gta=9195551212
tekelecstp 10-02-24 11:43:04 EST EAGLE 42.0.0
TYPEA TTN NDGT
3 c800 10
GTT table is (9 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
9195551212 9195551212 DPCSSN SSN 008-001-001
SSN=222 GTMODID=---------
Command Retrieved 1 Entries
;
rtrv-gtt:typen=10
tekelecstp 10-02-24 11:44:04 EST EAGLE 42.0.0
TYPEN TTN NDGT
10 -------- 6
GTT table is (9 of 269999) 1% full.
START GTA END GTA XLAT RI ITU PC
123456 123456 DPC GT 0500-1-0-1
SSN=--- GTMODID=---------
Command Retrieved 1 Entries
;
This example shows a retrieval of all GTTs for a specified translation when the VGTT feature is turned on:
rtrv-gtt:type=10:num=65535:force=yes
tekelecstp 10-02-24 11:44:04 EST EAGLE 42.0.0
TYPEA TTN NDGT
10 c800 6, 8, 10
GTT table is (17 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
976242 976242 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
976642 976642 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
976938 976938 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
80055500 80055519 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
80055520 80055539 DPC GT 001-254-255
SSN=255 GTMODID=---------
80055540 80055559 DPCNGT GT 001-254-255
SSN=255 GTMODID=---------
80055560 80055579 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
80055580 80055599 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
9195551212 9195551212 DPCSSN SSN 008-001-001
SSN=222 GTMODID=---------
8005550000 8005551999 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
8005552000 8005553999 DPC GT 001-254-255
SSN=255 GTMODID=---------
8005554000 8005555999 DPCNGT GT 001-254-255
SSN=255 GTMODID=---------
8005556000 8005557999 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
8005558000 8005559999 DPCSSN SSN 001-254-255
SSN=255 GTMODID=---------
9762428487 9762428487 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
9766423277 9766423277 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
9769388928 9769388928 DPCSSN SSN 001-254-255
SSN=222 GTMODID=---------
Command Retrieved 17 Entries
;
rtrv-gtt:type=7:gtmodid=asetansi5
tekelecstp 10-02-24 11:43:04 EST EAGLE 42.0.0
TYPEA TTN NDGT
7 isvm 3,6,7,10
GTT table is (17 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
564 564 DPCSSN SSN 248-006-015
SSN=245 GTMODID=asetansi5
641 641 DPCSSN SSN 248-006-015
SSN=245 GTMODID=asetansi5
589234 598744 DPCSSN SSN 248-006-015
SSN=245 GTMODID=asetansi5
648392 659832 DPCSSN SSN 248-006-015
SSN=245 GTMODID=asetansi5
Command Retrieved 4 Entries
;
This example shows output when the GTT table can contain up to 1,000,000 entries:
rtrv-gtt:type=7
tekelecstp 10-02-04 11:43:04 EST EAGLE 42.0.0
TYPEA TTN NDGT
7 isvm 3,6,7,10
GTT table is (17 of 1000000) 1% full.
START GTA END GTA XLAT RI PCA
564 564 DPCNGT GT 248-006-015
SSN=245 GTMODID=asetansi4
641 641 DPCNGT GT 248-006-015
SSN=245 GTMODID=---------
589234 598744 DPCNGT GT 248-006-015
SSN=245 GTMODID=asetansi4
648392 659832 DPCSSN SSN 248-006-015
SSN=245 GTMODID=---------
Command Retrieved 4 Entries
;
This example shows output for a 24-bit ITU-N point code translation type of 4:
rtrv-gtt:typen24=4
tekelecstp 10-02-24 11:43:04 EST EAGLE 42.0.0
TYPEN24 TTN NDGT
4 -------- 6
GTT table is (1 of 269999) 1% full.
START GTA END GTA XLAT RI ITU PC
919833 919833 DPCSSN SSN 008-008-008
SSN=20 GTMODID=---------
Command Retrieved 1 Entries
;
This example shows output when the ANSI/ITU SCCP Conversion feature is enabled and the pctype=ansi parameter is specified:
rtrv-gtt:typei=7:pctype=ansi
tekelecstp 10-02-04 11:43:04 EST EAGLE 42.0.0
TYPEI TTN NDGT
7 isvm 3,6,7,10
GTT table is (17 of 1000000) 1% full.
START GTA END GTA XLAT RI PCA
564 564 DPCNGT GT 002-136-005
SSN=245 GTMODID=aseti43 CGGTMOD = NO
648392 659832 DPCSSN SSN 007-006-005
SSN=245 GTMODID=--------- CGGTMOD = NO
Command Retrieved 2 Entries
;
This example shows output when the ANSI/ITU SCCP Conversion feature is enabled and the pctype=itui parameter is specified:
rtrv-gtt:typen=106:pctype=itui:gtmodid=id12
tekelecstp 10-02-24 11:43:04 EST EAGLE 42.0.0
TYPEN TTN NDGT
106 ntoi43 6
GTT table is (17 of 1000000) 1% full.
START GTA END GTA XLAT RI ITUI PC
300006 300006 DPCNGT GT 6-002-3
SSN=--- GTMODID=id12
Command Retrieved 1 Entries
;
This example shows output when the ANSI/ITU SCCP Conversion feature is enabled and the pctype=itun parameter is specified:
rtrv-gtt:type=55:pctype=itun
tekelecstp 10-02-24 11:43:04 EST EAGLE 42.0.0
TYPEA TTN NDGT
55 aton44 7
GTT table is (17 of 1000000) 1% full.
START GTA END GTA XLAT RI ITUN PC
6543210 6543210 DPCNGT GT 12341
SSN=--- GTMODID=amseta4
Command Retrieved 1 Entries
;
This example shows output when the ANSI/ITU SCCP Conversion feature is enabled and the pctype=itun24 parameter is specified:
rtrv-gtt:type=9:pctype=itun24
tekelecstp 10-02-04 11:43:04 EST EAGLE 42.0.0
TYPE TTN NDGT
7 isvm 3,6,7,10
GTT table is (17 of 1000000) 1% full.
START GTA END GTA XLAT RI ITUN24 PC
764 864 DPCNGT GT 002-136-005
SSN=245 GTMODID=amitu43 CGGTMOD = NO
668392 689832 DPCSSN SSN 007-006-005
SSN=245 GTMODID=--------- CGGTMOD = NO
Command Retrieved 2 Entries
;
rtrv-gtt:typen=3
tekelecstp 10-02-24 11:43:04 EST EAGLE 42.0.0
TYPEN TTN NDGT
3 -------- 6,21
GTT table is (6 of 269999) 1% full.
START GTA END GTA XLAT RI ITU PC
123456 123456 DPCSSN GT s-00124-aa
SSN=10 GTMODID=amnat34
234567 234567 DPCNGT GT s-00124-aa
SSN=--- GTMODID=---------
234568 234568 DPC GT s-00124-aa
SSN=--- GTMODID=---------
234569 234569 DPC GT s-00124-aa
SSN=--- GTMODID=amnat22
334569467213456789012 334569478932012345678 DPC GT s-00124-aa
SSN=--- GTMODID=amnat10
Command Retrieved 5 Entries
;
rtrv-gtt:typen=3:pcn=s-124-aa
tekelecstp 10-02-24 11:43:04 EST EAGLE 42.0.0
TYPEN TTN NDGT
3 -------- 6,21
GTT table is (6 of 269999) 1% full.
START GTA END GTA XLAT RI ITU PC
123456 123456 DPCSSN GT s-00124-aa
SSN=10 GTMODID=amsetnat1 CGGTMOD = YES
234567 234567 DPCNGT GT s-00124-aa
SSN=--- GTMODID=--------- CGGTMOD = NO
234568 234568 DPC GT s-00124-aa
SSN=--- GTMODID=--------- CGGTMOD = NO
234569 234569 DPC GT s-00124-aa
SSN=--- GTMODID=amsetnat2 CGGTMOD = YES
334569467213456789012 334569478932012345678 DPC GT s-00124-aa
SSN=--- GTMODID=amsetnat3 CGGTMOD = NO
Command Retrieved 5 Entries
;
rtrv-gtt:typen=3:ssn=104
tekelecstp 10-02-24 11:43:04 EST EAGLE 42.0.0
TYPEN TTN NDGT
3 -------- 6
GTT table is (5 of 269999) 1% full.
START GTA END GTA XLAT RI ITU PC
123456 123456 DPCSSN GT s-00124-aa
SSN=10 GTMODID=asetnal3
Command Retrieved 1 Entries
;
This example shows output when the Flexible GTT Load Sharing feature is not on:
rtrv-gtt:ttn=tbla
tekelecstp 10-02-24 15:50:49 EST EAGLE 42.0.0
TYPEA TTN NDGT
10 tbla 6
GTT table is (2 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
123456 123456 DPC GT 001-001-001
SSN=--- GTMODID=---------
234567 234567 DPCSSN SSN 001-001-001
SSN=2 GTMODID=---------
Command Retrieved 2 Entries
;
This example shows an MRN set value of NONE. The Flexible GTT Load-Sharing feature and the Intermediate GTT Load Sharing feature are on.
rtrv-gtt:ttn=tbl1
tekelecstp 10-02-24 13:54:32 EST EAGLE 42.0.0
TYPEA TTN NDGT
1 tbl1 10
GTT table is (1 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
1234567890 1234567890 DPC GT 001-001-002
MRNSET=NONE SSN=--- GTMODID=mod3
Command Retrieved 1 Entries
;
This example shows output when the Flexible GTT Load Sharing feature and the Origin-based SCCP feature are on:
rtrv-gtt:ttn=tbla
tekelecstp 10-02-24 14:51:59 EST EAGLE 42.0.0
TYPEA TTN NDGT
6 tbla 6,10
GTA table is (61 of 269999) 1% full
e1040501 10-02-24 13:33:10 EST EAGLE 42.0.0
START GTA END GTA XLAT RI ITU PC
123456 123456 DPC GT 1-101-1
MRNSET=DFLT SSN=--- GTMODID=--------- CGGTMOD = NO
Command Retrieved 1 Entries
;
This example shows output when the Hex Digit Support for GTT feature is turned on and hexadecimal digits are included in GTA values:
rtrv-gtt:typen=201
tekelecstp 10-02-24 13:36:23 EST EAGLE 42.0.0
TYPEN TTN NDGT
201 -------- 6,21
GTT table is (5 of 269999) 1% full.
START GTA END GTA XLAT RI PC
100000 10000d DPC GT 00101
SSN=--- GTMODID=---------
10000e 10000f DPC GT 00101
SSN=--- GTMODID=---------
100010 200000 DPC GT 00101
SSN=--- GTMODID=---------
abcdef0123456789abcdf fabcde01234567890afff DPCSSN SSN 00103
SSN=10 GTMODID=---------
fbcdef0123456789abcdf ffbfde01234567890aaff DPCSSN SSN 00103
SSN=10 GTMODID=asetnal33
Command Retrieved 5 Entries
;
This example shows output when the SCCP Loop Detection feature is enabled and an associated loopset entry exists:
rtrv-gtt:ttn=setssn:mapset=6
tekelecstp 10-02-24 12:41:25 EST EAGLE 42.0.0
TYPEA TTN NDGT
2 setssn 10
GTT table is (4 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
2133 2133 DPC GT 001-001-003
MAPSET=6 SSN=--- GTMODID=asetans CGGTMOD = NO
Command Retrieved 1 Entries
;
This example shows output for a specified MRN set when the Flexible GTT Load Sharing feature is enabled:
rtrv-gtt:ttn=tbla:mrnset=1
tekelecstp 10-02-24 12:41:25 EST EAGLE 42.0.0
TYPEA TTN NDGT
2 tbla 4
GTT table is (4 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
2133 2133 DPC GT 001-001-003
MRNSET=1 SSN=--- GTMODID=asetans CGGTMOD = NO
Command Retrieved 1 Entries
;
This example retrieves all examples of translation type 4 where calling party global title modification is requested:
rtrv-gtt:type=4:cggtmod=yes
tekelecstp 10-02-24 16:21:15 EST EAGLE 42.0.0
TYPEA TTN NDGT
4 -------- 6
GTT table is (1 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
981234 981234 DPC GT 001-001-001
MRNSET=DFLT SSN=--- GTMODID=asetans CGGTMOD = YES
LOOPSET = none
Command Retrieved 1 Entries
;
rtrv-gtt:type=1:num=22
e1040501 10-02-24 13:14:49 EST EAGLE 42.0.0
TYPEA TTN NDGT
1 -------- 6
GTT table is (22 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
111111 111111 DPC GT 001-001-002
SSN=--- GTMODID=---------
111112 111112 DPC GT 001-001-002
SSN=--- GTMODID=gtmo10
111113 111113 DPC GT 001-001-002
SSN=--- GTMODID=---------
111114 111114 DPC GT 001-001-002
SSN=--- GTMODID=gtmo12
111115 111115 DPC GT 001-001-002
SSN=--- GTMODID=---------
111116 111116 DPC GT 001-001-002
SSN=--- GTMODID=---------
111117 111117 DPC GT 001-001-002
SSN=--- GTMODID=---------
111118 111118 DPC GT 001-001-002
SSN=--- GTMODID=---------
111119 111119 DPC GT 001-001-002
SSN=--- GTMODID=---------
111120 111120 DPC GT 001-001-002
SSN=--- GTMODID=gtmo11
111121 111121 DPC GT 001-001-002
SSN=--- GTMODID=gtmo122
111122 111122 DPC GT 001-001-002
SSN=--- GTMODID=---------
111123 111123 DPC GT 001-001-002
SSN=--- GTMODID=---------
111124 111124 DPC GT 001-001-002
SSN=--- GTMODID=---------
111125 111125 DPC GT 001-001-002
SSN=--- GTMODID=---------
111126 111126 DPC GT 001-001-002
SSN=--- GTMODID=---------
111127 111127 DPC GT 001-001-002
SSN=--- GTMODID=gtmo121
111128 111128 DPC GT 001-001-002
SSN=--- GTMODID=---------
111129 111129 DPC GT 001-001-002
SSN=--- GTMODID=---------
111130 111130 DPC GT 001-001-002
SSN=--- GTMODID=---------
111131 111131 DPC GT 001-001-002
SSN=--- GTMODID=gtmo34
Command Retrieved 21 Entries
;
rtrv-gtt:type=2
e1040501 10-02-24 13:15:11 EST EAGLE 42.0.0
TYPEA TTN NDGT
2 -------- 6
GTT table is (22 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
222222 222229 DPCSSN SSN 001-001-002
SSN=10 GTMODID=---------
Command Retrieved 1 Entries
;
rtrv-gtt:type=1:gta=111268:egta=222259
tekelecstp 10-02-24 13:31:05 EST EAGLE 42.0.0
TYPEA TTN NDGT
1 -------- 6
GTT table is (37 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
111268 111268 DPCNGT GT 001-001-002
SSN=--- GTMODID=--------- CGGTMOD = NO
111269 111269 DPCNGT GT 001-001-002
SSN=--- GTMODID=asetans3 CGGTMOD = YES
111270 111270 DPCNGT GT 001-001-002
SSN=--- GTMODID=asetans4 CGGTMOD = NO
222252 222259 DPCSSN SSN 001-001-002
SSN=12 GTMODID=--------- CGGTMOD = YES
Command Retrieved 4 Entries
;
rtrv-gtt:type=1:mapset=1
e1040501 10-02-24 13:38:25 EST EAGLE 42.0.0
TYPEA TTN NDGT
1 -------- 3,6
GTT table is (41 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
105 105 DPCSSN SSN 001-001-003
MAPSET=1 SSN=14 GTMODID=--------- CGGTMOD = NO
Command Retrieved 1 Entries
;
rtrv-gtt:type=1:ssn=10
e1040501 10-02-24 13:33:10 EST EAGLE 42.0.0
TYPEA TTN NDGT
1 -------- 3,6
GTT table is (40 of 269999) 1% full.
START GTA END GTA XLAT RI PCA
100 100 DPCSSN SSN 001-001-002
SSN=10 GTMODID=--------- CGGTMOD = NO
101 101 DPCSSN SSN 001-001-003
SSN=10 GTMODID=mod3 CGGTMOD = NO
104 104 DPCSSN SSN 001-001-003
SSN=10 GTMODID=--------- CGGTMOD = NO
Command Retrieved 3 Entries
;
This example retrieves all CdGTA translations which have been provisioned by GTA commands:
rtrv-gtt:type=3
tekelecstp 10-03-02 13:15:11 EST EAGLE 42.0.0
TYPEA TTN NDGT
3 setans003 6
GTT table is (6 of 269999) 1% full.
;
tekelecstp 10-03-02 13:15:11 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PCA
345678 345680 DPC GT 001-001-002
SSN=--- NGT=---
Command Retrieved 1 Entries
rtrv-gtt:typeis=5
tekelecstp 10-05-01 04:39:18 EST EAGLE 42.0.0
TYPEIS TTN NDGT
5 -------- 6
GTT table is (12 of 269999) 1% full.
;
tekelecstp 10-05-01 04:39:18 EST EAGLE 42.0.0
START GTA END GTA XLAT RI ITU PC
123456 123456 DPC GT s-1-001-4
SSN=--- NGT=---
Command Retrieved 1 Entries
;
rtrv-gtt:typens=5
tekelecstp 10-05-01 04:40:38 EST EAGLE 42.0.0
TYPENS TTN NDGT
5 -------- 6
GTT table is (20 of 269999) 1% full.
;
tekelecstp 10-05-01 04:40:38 EST EAGLE 42.0.0
START GTA END GTA XLAT RI ITU PC
123456 123456 DPC GT s-00111
SSN=--- NGT=---
Command Retrieved 1 Entries
;
Legend
- type/typea/typei/typen/typen24/typeis/typens—Translation type
- TTN—Translation name
- NDGT—Number of digits
- GTT TABLE IS 10% FULL—Relative size of the GTT table
- x of y—Number of entries in the table (x) and the maximum number of entries configured for the table (y)
- START GTA—Global title start address
- END GTA—Global title end address
- XLAT—Translate indicator
- RI—Route indicator
- PC, PCA, ITU PC, ITUI PC, ITUN PC, ITUN24 PC—Point code
- SSN—Subsystem number
- MRN—Mated Relay Node
- MRNSET—MRN set ID
- MAPSET—MAP set ID
- CGGTMOD—Calling Party GT Modification Indicator
- GTMODID—Global Title Modification Identifier