4.537 rtrv-meas-sched

Use this command to retrieve the list of measurement reports currently scheduled to be dumped to the UI, and the collection settings for OAM based measurements.

This command provides no information on Measurements Platform (MCP) scheduled FTP reports or on the status of MCP measurements (see rtrv-measopts).

Refer to the Measurements Manual for specific details on measurement reports.

Parameters

This command has no parameters.

Example

rtrv-meas-sched

Dependencies

None

Notes

None

Output

Output with measurement collection on.

rtrv-meas-sched

    rlghncxa03w 04-02-27 07:19:51 EST  EAGLE 31.3.0
    COLLECT        = on
    GTWYLSFLTR     = both
    ---------------------
    SYSTOT-STP     = on
    SYSTOT-TT      = off
    COMP-LNKSET    = on
    COMP-LINK      = on
    GTWY-STP       = on
    GTWY-LNKSET    = on
    MTCD-STP       = on
    MTCD-LINK      = on
    MTCD-LNKSET    = on 
;

Output with measurement collection off. The parentheses () indicate that a setting is not in effect because collection is turned off.

rtrv-meas-sched

    rlghncxa03w 04-02-27 07:19:51 EST  EAGLE 31.3.0
    COLLECT        = off
    GTWYLSFLTR     = (both)
    ---------------------
    SYSTOT-STP     = (off)
    SYSTOT-TT      = (off)
    COMP-LNKSET    = (off)
    COMP-LINK      = (off)
    GTWY-STP       = (off)
    GTWY-LNKSET    = (off)
    MTCD-STP       = (on)
    MTCD-LINK      = (on)
    MTCD-LNKSET    = (on) 
;

Legend

  • COLLECT—Shows whether measurement collection is on or off.
  • GTWYLSFLTR—Shows the setting that filters the linksets included in the GTWY report. The settings are as follows:
  • both—Only gateway linksets are included in the report to the terminal and SEAS.
  • stp—Only gateway linksets are included in the report to the terminal. All defined linksets are included in the report to SEAS.
  • seas—All defined linksets are included in the report to the terminal. Only gateway linksets are included in the report to SEAS.
  • none—All defined linksets are included in the report to the terminal and SEAS.
  • SYSTOT-STP—System total–STP measurement collection is on or off.
  • SYSTOT-TT—System total–translation type measurement collection is on or off.
  • COMP-LNKSET—Component–linkset measurement collection is on or off.
  • COMP-LINK—Component-link measurement collection is on or off.
  • GTWY-STP—Gateway administration–STP measurement report is on or off.
  • GTWY-LNKSET—Gateway administration–LNKSET measurement report is on or off.
  • MTCD-STP—Maintenance daily–STP measurement collection is on or off.
  • MTCD-LINK—Maintenance daily–link measurement collection is on or off.
  • MTCD-LNKSET—Maintenance daily–LNKSET measurement report is on or off.