Set the DHCP Server

You can check and update the DHCP address range used for the Devices that access the LAN networks which include managed wireless and wired local devices. If you are not providing connectivity for any managed devices, you can ignore this screen. Devices that connect to the Cloud Connector can only connect back to the OCI network, and not to the public internet.

The DHCP Server Settings show the IP Address and the Subnet Mask for the DHCP server configured on the Cloud Connector, along with the starting and ending IP addresses for the pool of addresses used for DHCP server operation.

Consider the local LAN needs in your deployment.

1. From the Settings tab, click DHCP & Static IP Settings in the left panel. The DHCP & Static IP Settings screen appears.
2. Review the current settings by observing
   • IP Address & Subnet mask to define the network
   • Start Address where DHCP-served addresses begin
   • End Address where DHCP-served addresses end
3. Click the pencil icon in the Actions column and the Edit DHCP and Static IP Range drawer expands.
4. Enter the following values in the DHCP Range section of this drawer to define the DHCP server's operation:

   IP Address	Enter the IP address of the DHCP server.
   Subnet Mask	Enter the subnet mask for the DHCP server.
   Starting IP Address	The starting IP address of the DHCP server IP address range.
   Ending IP Address	The ending IP address of the DHCP server IP address range.

5. Click Update to save any changes.