Review and Update the Cellular Interface

You can review and update the cellular network interface on the Oracle Enterprise Communications Platform (Oracle ECP) Settings page. In addition to reviewing the network information provided by the Mobile Network Operator (MNO) and the cellular radio's hardware information, you can set which SIM card you want to determine the MNO used for connectivity.

About this Task

For a cellular network interface with two SIM cards, Oracle ECP displays identifying information for both SIM cards. Oracle ECP sets SIM Card 1 as the Preferred SIM by default, which you can change. The MNO associated with the SIM Card displays only for the Preferred SIM card.

1. Go to the Settings page and click cellular interface cell0.
2. In the right panel, review the general interface values.

   Enable	Displays whether this interface is enabled for use.
   Preferred SIM	Displays which SIM card is in use.
   Network Preference	Displays the priority you set on the local UI for this interface.
   Model	Displays the Model number of this cellular modem.
   Firmware Version	Displays the firmware version this cellular modem is running,
   IP Address	Displays the MNO-supplied IP address of this Ethernet interface.
   Subnet Mask	Displays the specified bitmask in dot-decimal notation to distinguish the host and network portions of an IP address.
   DNS Server	Displays the MNO-supplied IP address of the Domain Name System (DNS) server traffic exiting this interface will use.
   Gateway	Displays the MNO-supplied IP address of the host on the network that will send local network traffic to other networks.
   Bearer MNO	Displays the Bearer MNO, as reported by the active SIM-MNO
   Signal Strength	Displays the current signal strength in dB for the connected radio network.

3. In the right panel, you can review the SIM 1 and SIM 2 information.

   ICCID	Displays the Integrated Circuit Card Identification (ICCID) number that identifies the SIM card.
   IMSI	Displays the International Mobile Subscriber Identifier (IMSI) digit string that uniquely identifies the mobile network subscriber.
   IMEI	Displays the International Mobile Equipment Identity (IMEI) that identifies the Cloud Connector as the equipment using the SIM card.
   APN	Displays the Access Point Name for the SIM Card for the cellular interface enabled on the Cloud Connector.

4. (Optional) In the right panel, click Edit to update the SIM in-use preference to either SIM 1 or SIM 2 and update the APN accordingly.
5. (Optional) In the right panel, enable or disable the interface.
6. Click Update to save the changes.