Review and Update Wi-Fi Interfaces

The Cloud Connector contains 2 Wi-Fi interfaces that function identically to each other. One interface operates on the 2.4 GHz band, and the other interface operates on the 5 GHz band. Prior to activation, each interface can be reviewed and updated. These interfaces provide local connectivity through the Cloud Connector itself and to OCI for Oracle-hosted services. The Cloud Connector's local LAN also includes the two Ethernet interfaces for wired applications.

Context: The Cloud Connector's Wi-Fi interfaces provide LAN connectivity to wireless devices.

When providing connectivity to local clients, you can choose to provision them with addresses either statically or dynamically. The Cloud Connector keeps these two networks separate. When using static IP addressing, use the Static IP and Static Subnet Address to define the network. When using DHCP, use the IP Address and Subnet Mask to define the network.

Context: You can set the SSID, Wi-Fi password, and country code for a Wi-Fi interface.

1. Click the Settings tab at the bottom of the page.
2. Click a Wi-Fi interface. Note that the Wi-Fi interface's frequency of 2.4 GHz or 5.0 GHz is labeled for identification.
3. Review the Wi-Fi interface's values in the right panel.

   Enable	Indicates if this interface is enabled for use.
   Make	The make of this Wi-Fi radio.
   Firmware Version	The firmware version running on this Wi-Fi radio.
   IP Address	The IP address of this interface
   Subnet Mask	A bitmask specified in dot-decimal notation to distinguish the host and network portions of an IP address.
   Static IP	If local clients are provisioned with static IP addresses, ensure that they are assigned from this IP address and the following Static Subnet Address as a subnet.
   Static Subnet Address	Defines the local subnet to use for statically defined IP addressing.
   Band (Read Only)	The frequency band used for Wi-Fi communications.
   Operation Mode (Read Only)	Indicates the applicable 802.11 wireless standards and the associated modes of operation for the Wi-Fi network interface.
   Security Protocol (Read Only)	Indicates the security protocol used with the Wi-Fi interface.
   Key Management (Read Only)	Indicates the encryption method used to authenticate users over wireless local area networks (WLANs). The default setting is Wi-Fi Protected Access (WPA) - Pre-Shared Key (PSK) mode.
   Channel Width (Read Only)	Indicates how much of the frequency range a Wi-Fi channel uses.
   Channel	Indicates the specific frequency range at which devices using Wi-Fi can communicate in the broader Wi-Fi band.
   SSID	The unique Service Set Identifier (SSID) assigned to identify the Wi-Fi network during Cloud Connector set up.
   Password	Replace the default password with the wireless network password specified on the .csv file used to provide onboarding details.
   Country Code	The default Country Code is Auto, which enables an Cloud Connector to scan and detect radio frequencies and determine the Country Code to set.

4. Click Edit to make changes to the following values:

   Enable	Set to enable or disable this interface.
   SSID	Set the SSID for this wireless network.
   Password	Set the password for this wireless network
   Country Code	Set a specific country code for this wireless network, or set to Auto.

5. Click Update to save any changes.