8 LNP Measurements
This chapter describes the measurements that can be collected and generated for the LNP feature.
8.1 LNP Measurements
-
The Measurements Platform feature enabled and the Measurements Platform collection option on
Note:
When the Measurements Platform is installed, the Measurements subsystem collects measurements data for all provisioned LRNs and NPANXXs, up to 200,000 LRNs and 350,000 NPANXXs. Full LNP reports are available using FTP or by enabling the schedule option. LNP measurement reports are still available using FTA, but are limited to 100,000 LRNs and 150,000 NPANXXs. -
The E5-OAM Integrated Measurements feature enabled and on and the E5-OAM Integrated Measurements collection option on.
Refer to Measurements Reference for EAGLE for detailed descriptions of measurements and measurements reports.
Refer to Commands User's Guide for descriptions of the commands used to enable and turn on features, turn on measurements collection options, and schedule and generate measurements reports.
Refer to the procedures in Database Administration - System Management User's Guide for EAGLE to configure the Measurements Platform feature or E5-OAM Integrated Measurements feature for use with the LNP feature.
Per System, Per SSP, Per LRN, and Per NPA LNP measurements are available in the Daily (MTCD) and Hourly (MTCH) reports for Entity Type LNP.
Table 8-1 describes the Per System measurement peg counts of LNP MSUs (Message Signalling Units) that are supported for the LNP feature.
Table 8-1 Pegs for Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) Per System LNP Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
LNPQRCV |
Trigger Based Total number of queries received by LNPQS |
System |
Peg count |
|
Triggerless Number of encapsulated IAM messages received by LNPQS |
System |
Peg count |
|
|
LNPQDSC |
Trigger Based Number of invalid queries that are discarded because no reply can be generated |
System |
Peg count |
|
Triggerless All invalid IAM message are routed without LNP; LNPQTCPE is pegged. |
System |
N/A |
|
|
LNPQTCPE |
Trigger Based Number of error replies with TCAP error codes |
System |
Peg count |
|
Triggerless Number of invalid encapsulated IAMm messages received by LNPQS. These messages are routed to their destinations with no LNP lookup. |
System |
Peg count |
|
| LNPSREP |
Trigger Based Number of successful replies |
System | Peg count |
|
Triggerless Number of successful IAM messages |
System |
Peg count |
|
|
LNPQUNPA |
Trigger Based Number of correct queries received for a non-ported DN when the NPAXXX is not provisioned |
System |
Peg count |
|
Triggerless Number of correct encapsulated IAM messages received for a non-ported DN when the NPAXXX is not provisioned |
System |
Peg count |
|
| STATUS |
Indication of Data Validity:
|
System | Status |
Table 8-2 describes the Per SSP measurement peg counts of LNP MSUs that are supported for the LNP feature. .
Table 8-2 Pegs for Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) Per SSP LNP Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
SSPQRCV |
Trigger Based Number of correct queries received per originating SSP |
Point Code |
Peg count |
|
Triggerless Number of correct encapsulated IAM messages received by LNPQS per OPC |
System |
Peg count |
|
|
CLASSGTRQ |
Number of valid CLASS Global Title Translation received per originating SSP |
Point Code |
Peg count |
|
LIDBGTRQ |
Number of valid LIDB Global Title Translation received per originating SSP |
Point Code |
Peg count |
|
SSPQRCVP |
Number of correct queries received for ported TNs per originating SSP |
Point Code |
Peg count |
| SSPQRCVNP | Number of correct queries received for non-ported TNs per originating SSP | Point Code | Peg count |
| CLASSGTRQP | Number of CLASS Global Title Translation received for ported TNs per originating SSP | Point Code | Peg Count |
| CLASSGTRQNP | Number of CLASS Global Title Translation received for non-ported TNs per originating SSP | Point Code | Peg count |
| LIDBGTRQP | Number of LIDB Global Title Translation received for ported TNs per originating SSP | Point Code | Peg count |
| LIDBGTRQNP | Number of LIDB Global Title Translation received for non-ported TNs per originating SSP | Point Code | Peg count |
| CNAMGTRQP | Number of CNAM Global Title Translation received for ported TNs per originating SSP | Point Code | Peg count |
| CNAMGTRQNP | Number of CNAM Global Title Translation received for non-ported TNs per originating SSP | Point Code | Peg count |
| ISVMGTRQP | Number of ISVM Global Title Translation received for ported TNs per originating SSP | Point Code | Peg count |
| ISVMGTRQNP | Number of ISVM Global Title Translation received for non-ported TNs per originating SSP | Point Code | Peg count |
| WSMSCGTRQP | Number of WSMSC Global Title Translation received for ported TNs per originating SSP | Point Code | Peg count |
| WSMSCGTRQNP | Number of WSMSC Global Title Translation received for non-ported TNs per originating SSP | Point Code | Peg count |
| STATUS |
Indication of Data Validity:
|
Point Code | Status |
|
The following equations apply: SSQRCV = SSPQRCVP + SSPQRCVNP CLASSGTRQ = CLASSGTRQP + CLASSGTRQNP LIBDGTRQ = LIBDGTRQP + LIBDGTRQNP |
|||
The measurement events described in Table 8-3 are included on the STP Daily Maintenance (MTCD) and the STP Hourly (MTCH) measurement reports.
Table 8-3 Pegs for Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP LRN Measurements
|
LRNQRCV |
Trigger Based Number of correct queries received per LRN |
|
Triggerless Number of correct encapsulated IAM messages received per LRN |
|
|
STATUS |
Indication of Data Validity:
|
The measurement events described in Table 8-4 are included on the STP Daily Maintenance (MTCD) and the STP Hourly (MTCH) measurement reports.
Table 8-4 Pegs for Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP NPA Measurements
|
NPAQRCV |
Number of correct queries received per NPAXXX for non-ported DN |
| STATUS |
Indication of Data Validity:
|