sti-config
The sti-config object configures server connection control parameters the Oracle Communications Session Border Controller uses to manage STIR/SHAKEN server availability.
Parameters
- circuit-breaker-window-duration
- Specifies the time in seconds the system uses to establish the window it uses to establish the circuit breakers timing. The default is 10 seconds. The range is from 10 to 30.
- circuit-breaker-error-threshold
- Specifies the number of errors the system counts before it marks the server as out of service. The default is 5 errors. The range is from 3 to 10.
- circuit-breaker-retry-time
- Specifies the time in seconds the system uses to retry connecting to the server. The default is 15 seconds. The range is from 5 to 900.
- circuit-breaker-half-open-frequency
- Specifies the number of times the system skips this server while it is marked half open. The default is 6, which causes the system to re-use the server once every 6th retry. The range is from 5 to 100.
- sti-signaling-attest-info-mandatory
- When enabled, causes the system to check whether the mandatory headers
P-Attestation-Info (or Attestation-Info) header and P-Origination-ID or
(Origination-ID) header are present in received INVITE. If either of these
headers are missing, the system does not sent an attestation request to the
STI server.
- Default: disabled
- Values: enabled | disabled
- anonymous-uri-add-verstat-to-hostpart
- This parameter determines the system's placement of the verstat parameter when
the received INVITE does not contain a P-Asserted-IDentity header, but does
contain a Privacy header and an anonymous URI in the FROM. When enabled,
the system adds the verstat parameter after the hostpart of the anonymous
From URI. When disabled, the system adds the verstat parameter after the
user-part of the anonymous From URI.
- Default: disabled
- Values: enabled | disabled
- use-identity-header
-
When enabled in conjunction with STI verification, this parameter causes the SBC to add a Reason header to 18x, 19x responses and 3xx, 4xx, 5xx, 6xx final responses that it sends to a callee with a cause value of “428” and the text “Use Identity Header” for all received INVITEs that did not contain an identity header.
- Default: disabled
- Values: enabled | disabled
- check-duplicate-passports
-
Enables the system to check for duplicate SHAKEN or DIV passports in a received INVITE. If it finds duplicates, the system deletes one of the duplicates from the INVITE.
- Default: disabled
- Values: enabled | disabled
- tn-retargeting
-
Enables the system to perform DIV authentication request, based on the received INVITE.
- Default: disabled
- Values: enabled | disabled
- verstat-comparison
-
To support authentication processes, determines whether and how the system compares the verstat value present in FROM and PAI headers with the values present in this parameter. If a value matches, then the system accepts the validation and performs only DIV authentication processes. If the value is empty, the system does not perform the comparison.
- Default: Empty
- TN-Validation-Passed
- TN-Validation-Passed
- No-TN-Validation
- TN-Validation-Failed
- dest-comparison
-
Specifies whether and on which header the system compares its stored TN with either the Request-URI or the To header in received INVITEs with the {dest} value in the SHAKEN passport. If the value is empty, the system does not perform the comparison.
- Default: Empty
- Request-URI
- To
- sti-as-correlation-id
- When enabled, the system adds the SipCallId parameter to REST authentication requests to the STI-AS. This parameter contains the information from the corrID parameter in the P-NokiaSiemens.Session-Info SIP header.
- reason-json-sip-translation
- When enabled, the system creates a Reason header from the parameters reasoncode and reasontext, if received from the STI-VS. The system also adds this Reason header to the egress INVITE.
- sti-header-mapping-ruleset-name
- Name of this STI Header Mapping Ruleset you want to use as default across all sti-servers. A ruleset name configured against a sti-server takes precedence for that server over this ruleset.
- flip-tn-lookup-order
-
When enabled, the system prioritizes the FROM header over the PAI header as the source from which it retrieves a TN for use during authentication and verification procedures.
- Default: disabled
- Values: enabled | disabled
Path
sti-config is an element under the session-router branch. The full path from the topmost ACLI prompt is: .