1. Setup Guide
  2. Workstation Setup
  3. Mounting the Enclosure for Battery on the Basic Stand

Mounting the Enclosure for Battery on the Basic Stand

Mounting the Enclosure on a Basic Stand

  1. Place the stand and workstation upside down on a flat surface.

    Figure 3-14 Bottom View of the Compact Workstation 310 with Basic Stand

    This image shows the bottom view of Compact Workstation 310 with Basic Stand.
  2. Insert the enclosure mounting tabs into the stand mounting slots.

    Figure 3-15 Installing the Enclosure in the Basic Stand

    This image depicts sliding the battery enclosure into the slots on the bottom of the Basic Stand
  3. Tighten the stand thumbscrew (1) to secure the enclosure to the stand.

    Figure 3-16 The Oracle MICROS Basic Stand with the Enclosure for Battery

    This image shows the enclosure mounted on the bottom of the Basic Stand.
  4. Connect the workstation Power Adapter (15V) to the DC power input, and then plug the Power Adapter into an outlet to charge the battery.

Parent topic: Workstation Setup