Class String
- All Implemented Interfaces:
Serializable
,CharSequence
,Comparable<String>
,Constable
,ConstantDesc
String
class represents character strings. All
string literals in Java programs, such as "abc"
, are
implemented as instances of this class.
Strings are constant; their values cannot be changed after they are created. String buffers support mutable strings. Because String objects are immutable they can be shared. For example:
String str = "abc";
is equivalent to:
char data[] = {'a', 'b', 'c'}; String str = new String(data);
Here are some more examples of how strings can be used:
System.out.println("abc"); String cde = "cde"; System.out.println("abc" + cde); String c = "abc".substring(2, 3); String d = cde.substring(1, 2);
The class String
includes methods for examining
individual characters of the sequence, for comparing strings, for
searching strings, for extracting substrings, and for creating a
copy of a string with all characters translated to uppercase or to
lowercase. Case mapping is based on the Unicode Standard version
specified by the Character
class.
The Java language provides special support for the string concatenation operator ( + ), and for conversion of other objects to strings. For additional information on string concatenation and conversion, see The Java Language Specification.
Unless otherwise noted, passing a null
argument to a constructor
or method in this class will cause a NullPointerException
to be
thrown.
A String
represents a string in the UTF-16 format
in which supplementary characters are represented by surrogate
pairs (see the section Unicode
Character Representations in the Character
class for
more information).
Index values refer to char
code units, so a supplementary
character uses two positions in a String
.
The String
class provides methods for dealing with
Unicode code points (i.e., characters), in addition to those for
dealing with Unicode code units (i.e., char
values).
Unless otherwise noted, methods for comparing Strings do not take locale
into account. The Collator
class provides methods for
finer-grain, locale-sensitive String comparison.
- Implementation Note:
- The implementation of the string concatenation operator is left to
the discretion of a Java compiler, as long as the compiler ultimately conforms
to The Java Language Specification. For example, the
javac
compiler may implement the operator withStringBuffer
,StringBuilder
, orjava.lang.invoke.StringConcatFactory
depending on the JDK version. The implementation of string conversion is typically through the methodtoString
, defined byObject
and inherited by all classes in Java. - See Java Language Specification:
-
15.18.1 String Concatenation Operator +
- Since:
- 1.0
- See Also:
-
Field Summary
Modifier and TypeFieldDescriptionstatic final Comparator
<String> A Comparator that ordersString
objects as bycompareToIgnoreCase
. -
Constructor Summary
ConstructorDescriptionString()
Initializes a newly createdString
object so that it represents an empty character sequence.String
(byte[] bytes) Constructs a newString
by decoding the specified array of bytes using thedefault charset
.String
(byte[] ascii, int hibyte) Deprecated.This method does not properly convert bytes into characters.String
(byte[] bytes, int offset, int length) Constructs a newString
by decoding the specified subarray of bytes using thedefault charset
.String
(byte[] ascii, int hibyte, int offset, int count) Deprecated.This method does not properly convert bytes into characters.Constructs a newString
by decoding the specified subarray of bytes using the specified charset.Constructs a newString
by decoding the specified subarray of bytes using the specified charset.Constructs a newString
by decoding the specified array of bytes using the specified charset.Constructs a newString
by decoding the specified array of bytes using the specified charset.String
(char[] value) Allocates a newString
so that it represents the sequence of characters currently contained in the character array argument.String
(char[] value, int offset, int count) Allocates a newString
that contains characters from a subarray of the character array argument.String
(int[] codePoints, int offset, int count) Allocates a newString
that contains characters from a subarray of the Unicode code point array argument.Initializes a newly createdString
object so that it represents the same sequence of characters as the argument; in other words, the newly created string is a copy of the argument string.String
(StringBuffer buffer) Allocates a new string that contains the sequence of characters currently contained in the string buffer argument.String
(StringBuilder builder) Allocates a new string that contains the sequence of characters currently contained in the string builder argument. -
Method Summary
Modifier and TypeMethodDescriptionchar
charAt
(int index) Returns thechar
value at the specified index.chars()
Returns a stream ofint
zero-extending thechar
values from this sequence.int
codePointAt
(int index) Returns the character (Unicode code point) at the specified index.int
codePointBefore
(int index) Returns the character (Unicode code point) before the specified index.int
codePointCount
(int beginIndex, int endIndex) Returns the number of Unicode code points in the specified text range of thisString
.Returns a stream of code point values from this sequence.int
Compares two strings lexicographically.int
Compares two strings lexicographically, ignoring case differences.Concatenates the specified string to the end of this string.boolean
Returns true if and only if this string contains the specified sequence of char values.boolean
Compares this string to the specifiedCharSequence
.boolean
Compares this string to the specifiedStringBuffer
.static String
copyValueOf
(char[] data) Equivalent tovalueOf(char[])
.static String
copyValueOf
(char[] data, int offset, int count) Equivalent tovalueOf(char[], int, int)
.Returns anOptional
containing the nominal descriptor for this instance, which is the instance itself.boolean
Tests if this string ends with the specified suffix.boolean
Compares this string to the specified object.boolean
equalsIgnoreCase
(String anotherString) Compares thisString
to anotherString
, ignoring case considerations.static String
Returns a formatted string using the specified format string and arguments.static String
Returns a formatted string using the specified locale, format string, and arguments.Formats using this string as the format string, and the supplied arguments.byte[]
getBytes()
Encodes thisString
into a sequence of bytes using thedefault charset
, storing the result into a new byte array.void
getBytes
(int srcBegin, int srcEnd, byte[] dst, int dstBegin) Deprecated.This method does not properly convert characters into bytes.byte[]
Encodes thisString
into a sequence of bytes using the named charset, storing the result into a new byte array.byte[]
Encodes thisString
into a sequence of bytes using the given charset, storing the result into a new byte array.void
getChars
(int srcBegin, int srcEnd, char[] dst, int dstBegin) Copies characters from this string into the destination character array.int
hashCode()
Returns a hash code for this string.indent
(int n) Adjusts the indentation of each line of this string based on the value ofn
, and normalizes line termination characters.int
indexOf
(int ch) Returns the index within this string of the first occurrence of the specified character.int
indexOf
(int ch, int fromIndex) Returns the index within this string of the first occurrence of the specified character, starting the search at the specified index.int
indexOf
(int ch, int beginIndex, int endIndex) Returns the index within this string of the first occurrence of the specified character, starting the search atbeginIndex
and stopping beforeendIndex
.int
Returns the index within this string of the first occurrence of the specified substring.int
Returns the index within this string of the first occurrence of the specified substring, starting at the specified index.int
Returns the index of the first occurrence of the specified substring within the specified index range ofthis
string.intern()
Returns a canonical representation for the string object.boolean
isBlank()
boolean
isEmpty()
static String
join
(CharSequence delimiter, CharSequence... elements) Returns a new String composed of copies of theCharSequence elements
joined together with a copy of the specifieddelimiter
.static String
join
(CharSequence delimiter, Iterable<? extends CharSequence> elements) Returns a newString
composed of copies of theCharSequence elements
joined together with a copy of the specifieddelimiter
.int
lastIndexOf
(int ch) Returns the index within this string of the last occurrence of the specified character.int
lastIndexOf
(int ch, int fromIndex) Returns the index within this string of the last occurrence of the specified character, searching backward starting at the specified index.int
lastIndexOf
(String str) Returns the index within this string of the last occurrence of the specified substring.int
lastIndexOf
(String str, int fromIndex) Returns the index within this string of the last occurrence of the specified substring, searching backward starting at the specified index.int
length()
Returns the length of this string.lines()
Returns a stream of lines extracted from this string, separated by line terminators.boolean
Tells whether or not this string matches the given regular expression.int
offsetByCodePoints
(int index, int codePointOffset) Returns the index within thisString
that is offset from the givenindex
bycodePointOffset
code points.boolean
regionMatches
(boolean ignoreCase, int toffset, String other, int ooffset, int len) Tests if two string regions are equal.boolean
regionMatches
(int toffset, String other, int ooffset, int len) Tests if two string regions are equal.repeat
(int count) Returns a string whose value is the concatenation of this string repeatedcount
times.replace
(char oldChar, char newChar) Returns a string resulting from replacing all occurrences ofoldChar
in this string withnewChar
.replace
(CharSequence target, CharSequence replacement) Replaces each substring of this string that matches the literal target sequence with the specified literal replacement sequence.replaceAll
(String regex, String replacement) Replaces each substring of this string that matches the given regular expression with the given replacement.replaceFirst
(String regex, String replacement) Replaces the first substring of this string that matches the given regular expression with the given replacement.Resolves this instance as aConstantDesc
, the result of which is the instance itself.String[]
Splits this string around matches of the given regular expression.String[]
Splits this string around matches of the given regular expression.String[]
splitWithDelimiters
(String regex, int limit) Splits this string around matches of the given regular expression and returns both the strings and the matching delimiters.boolean
startsWith
(String prefix) Tests if this string starts with the specified prefix.boolean
startsWith
(String prefix, int toffset) Tests if the substring of this string beginning at the specified index starts with the specified prefix.strip()
Returns a string whose value is this string, with all leading and trailing white space removed.Returns a string whose value is this string, with incidental white space removed from the beginning and end of every line.Returns a string whose value is this string, with all leading white space removed.Returns a string whose value is this string, with all trailing white space removed.subSequence
(int beginIndex, int endIndex) Returns a character sequence that is a subsequence of this sequence.substring
(int beginIndex) Returns a string that is a substring of this string.substring
(int beginIndex, int endIndex) Returns a string that is a substring of this string.char[]
Converts this string to a new character array.Converts all of the characters in thisString
to lower case using the rules of the default locale.toLowerCase
(Locale locale) Converts all of the characters in thisString
to lower case using the rules of the givenLocale
.toString()
This object (which is already a string!)Converts all of the characters in thisString
to upper case using the rules of the default locale.toUpperCase
(Locale locale) Converts all of the characters in thisString
to upper case using the rules of the givenLocale
.<R> R
This method allows the application of a function tothis
string.Returns a string whose value is this string, with escape sequences translated as if in a string literal.trim()
Returns a string whose value is this string, with all leading and trailing space removed, where space is defined as any character whose codepoint is less than or equal to'U+0020'
(the space character).static String
valueOf
(boolean b) Returns the string representation of theboolean
argument.static String
valueOf
(char c) Returns the string representation of thechar
argument.static String
valueOf
(char[] data) Returns the string representation of thechar
array argument.static String
valueOf
(char[] data, int offset, int count) Returns the string representation of a specific subarray of thechar
array argument.static String
valueOf
(double d) Returns the string representation of thedouble
argument.static String
valueOf
(float f) Returns the string representation of thefloat
argument.static String
valueOf
(int i) Returns the string representation of theint
argument.static String
valueOf
(long l) Returns the string representation of thelong
argument.static String
Returns the string representation of theObject
argument.
-
Field Details
-
CASE_INSENSITIVE_ORDER
A Comparator that ordersString
objects as bycompareToIgnoreCase
. This comparator is serializable.Note that this Comparator does not take locale into account, and will result in an unsatisfactory ordering for certain locales. The
Collator
class provides locale-sensitive comparison.- Since:
- 1.2
- See Also:
-
-
Constructor Details
-
String
public String()Initializes a newly createdString
object so that it represents an empty character sequence. Note that use of this constructor is unnecessary since Strings are immutable. -
String
Initializes a newly createdString
object so that it represents the same sequence of characters as the argument; in other words, the newly created string is a copy of the argument string. Unless an explicit copy oforiginal
is needed, use of this constructor is unnecessary since Strings are immutable.- Parameters:
original
- AString
-
String
public String(char[] value) Allocates a newString
so that it represents the sequence of characters currently contained in the character array argument. The contents of the character array are copied; subsequent modification of the character array does not affect the newly created string.The contents of the string are unspecified if the character array is modified during string construction.
- Parameters:
value
- The initial value of the string
-
String
public String(char[] value, int offset, int count) Allocates a newString
that contains characters from a subarray of the character array argument. Theoffset
argument is the index of the first character of the subarray and thecount
argument specifies the length of the subarray. The contents of the subarray are copied; subsequent modification of the character array does not affect the newly created string.The contents of the string are unspecified if the character array is modified during string construction.
- Parameters:
value
- Array that is the source of charactersoffset
- The initial offsetcount
- The length- Throws:
IndexOutOfBoundsException
- Ifoffset
is negative,count
is negative, oroffset
is greater thanvalue.length - count
-
String
public String(int[] codePoints, int offset, int count) Allocates a newString
that contains characters from a subarray of the Unicode code point array argument. Theoffset
argument is the index of the first code point of the subarray and thecount
argument specifies the length of the subarray. The contents of the subarray are converted tochar
s; subsequent modification of theint
array does not affect the newly created string.The contents of the string are unspecified if the codepoints array is modified during string construction.
- Parameters:
codePoints
- Array that is the source of Unicode code pointsoffset
- The initial offsetcount
- The length- Throws:
IllegalArgumentException
- If any invalid Unicode code point is found incodePoints
IndexOutOfBoundsException
- Ifoffset
is negative,count
is negative, oroffset
is greater thancodePoints.length - count
- Since:
- 1.5
-
String
Deprecated.This method does not properly convert bytes into characters. As of JDK 1.1, the preferred way to do this is via theString
constructors that take aCharset
, charset name, or that use thedefault charset
.Allocates a newString
constructed from a subarray of an array of 8-bit integer values.The
offset
argument is the index of the first byte of the subarray, and thecount
argument specifies the length of the subarray.Each
byte
in the subarray is converted to achar
as specified in theString(byte[],int)
constructor.The contents of the string are unspecified if the byte array is modified during string construction.
- Parameters:
ascii
- The bytes to be converted to charactershibyte
- The top 8 bits of each 16-bit Unicode code unitoffset
- The initial offsetcount
- The length- Throws:
IndexOutOfBoundsException
- Ifoffset
is negative,count
is negative, oroffset
is greater thanascii.length - count
- See Also:
-
String
Deprecated.This method does not properly convert bytes into characters. As of JDK 1.1, the preferred way to do this is via theString
constructors that take aCharset
, charset name, or that use thedefault charset
.Allocates a newString
containing characters constructed from an array of 8-bit integer values. Each character c in the resulting string is constructed from the corresponding component b in the byte array such that:c == (char)(((hibyte & 0xff) << 8) | (b & 0xff))
The contents of the string are unspecified if the byte array is modified during string construction.
- Parameters:
ascii
- The bytes to be converted to charactershibyte
- The top 8 bits of each 16-bit Unicode code unit- See Also:
-
String
public String(byte[] bytes, int offset, int length, String charsetName) throws UnsupportedEncodingException Constructs a newString
by decoding the specified subarray of bytes using the specified charset. The length of the newString
is a function of the charset, and hence may not be equal to the length of the subarray.The behavior of this constructor when the given bytes are not valid in the given charset is unspecified. The
CharsetDecoder
class should be used when more control over the decoding process is required.The contents of the string are unspecified if the byte array is modified during string construction.
- Parameters:
bytes
- The bytes to be decoded into charactersoffset
- The index of the first byte to decodelength
- The number of bytes to decodecharsetName
- The name of a supported charset- Throws:
UnsupportedEncodingException
- If the named charset is not supportedIndexOutOfBoundsException
- Ifoffset
is negative,length
is negative, oroffset
is greater thanbytes.length - length
- Since:
- 1.1
-
String
Constructs a newString
by decoding the specified subarray of bytes using the specified charset. The length of the newString
is a function of the charset, and hence may not be equal to the length of the subarray.This method always replaces malformed-input and unmappable-character sequences with this charset's default replacement string. The
CharsetDecoder
class should be used when more control over the decoding process is required.The contents of the string are unspecified if the byte array is modified during string construction.
- Parameters:
bytes
- The bytes to be decoded into charactersoffset
- The index of the first byte to decodelength
- The number of bytes to decodecharset
- The charset to be used to decode thebytes
- Throws:
IndexOutOfBoundsException
- Ifoffset
is negative,length
is negative, oroffset
is greater thanbytes.length - length
- Since:
- 1.6
-
String
Constructs a newString
by decoding the specified array of bytes using the specified charset. The length of the newString
is a function of the charset, and hence may not be equal to the length of the byte array.The behavior of this constructor when the given bytes are not valid in the given charset is unspecified. The
CharsetDecoder
class should be used when more control over the decoding process is required.The contents of the string are unspecified if the byte array is modified during string construction.
- Parameters:
bytes
- The bytes to be decoded into characterscharsetName
- The name of a supported charset- Throws:
UnsupportedEncodingException
- If the named charset is not supported- Since:
- 1.1
-
String
Constructs a newString
by decoding the specified array of bytes using the specified charset. The length of the newString
is a function of the charset, and hence may not be equal to the length of the byte array.This method always replaces malformed-input and unmappable-character sequences with this charset's default replacement string. The
CharsetDecoder
class should be used when more control over the decoding process is required.The contents of the string are unspecified if the byte array is modified during string construction.
- Parameters:
bytes
- The bytes to be decoded into characterscharset
- The charset to be used to decode thebytes
- Since:
- 1.6
-
String
public String(byte[] bytes, int offset, int length) Constructs a newString
by decoding the specified subarray of bytes using thedefault charset
. The length of the newString
is a function of the charset, and hence may not be equal to the length of the subarray.The behavior of this constructor when the given bytes are not valid in the default charset is unspecified. The
CharsetDecoder
class should be used when more control over the decoding process is required.The contents of the string are unspecified if the byte array is modified during string construction.
- Parameters:
bytes
- The bytes to be decoded into charactersoffset
- The index of the first byte to decodelength
- The number of bytes to decode- Throws:
IndexOutOfBoundsException
- Ifoffset
is negative,length
is negative, oroffset
is greater thanbytes.length - length
- Since:
- 1.1
-
String
public String(byte[] bytes) Constructs a newString
by decoding the specified array of bytes using thedefault charset
. The length of the newString
is a function of the charset, and hence may not be equal to the length of the byte array.The behavior of this constructor when the given bytes are not valid in the default charset is unspecified. The
CharsetDecoder
class should be used when more control over the decoding process is required.The contents of the string are unspecified if the byte array is modified during string construction.
- Parameters:
bytes
- The bytes to be decoded into characters- Since:
- 1.1
-
String
Allocates a new string that contains the sequence of characters currently contained in the string buffer argument. The contents of the string buffer are copied; subsequent modification of the string buffer does not affect the newly created string.- Parameters:
buffer
- AStringBuffer
-
String
Allocates a new string that contains the sequence of characters currently contained in the string builder argument. The contents of the string builder are copied; subsequent modification of the string builder does not affect the newly created string.The contents of the string are unspecified if the
StringBuilder
is modified during string construction.This constructor is provided to ease migration to
StringBuilder
. Obtaining a string from a string builder via thetoString
method is likely to run faster and is generally preferred.- Parameters:
builder
- AStringBuilder
- Since:
- 1.5
-
-
Method Details
-
length
public int length()Returns the length of this string. The length is equal to the number of Unicode code units in the string.- Specified by:
length
in interfaceCharSequence
- Returns:
- the length of the sequence of characters represented by this object.
-
isEmpty
public boolean isEmpty()- Specified by:
isEmpty
in interfaceCharSequence
- Returns:
true
iflength()
is0
, otherwisefalse
- Since:
- 1.6
-
charAt
public char charAt(int index) Returns thechar
value at the specified index. An index ranges from0
tolength() - 1
. The firstchar
value of the sequence is at index0
, the next at index1
, and so on, as for array indexing.If the
char
value specified by the index is a surrogate, the surrogate value is returned.- Specified by:
charAt
in interfaceCharSequence
- Parameters:
index
- the index of thechar
value.- Returns:
- the
char
value at the specified index of this string. The firstchar
value is at index0
. - Throws:
IndexOutOfBoundsException
- if theindex
argument is negative or not less than the length of this string.
-
codePointAt
public int codePointAt(int index) Returns the character (Unicode code point) at the specified index. The index refers tochar
values (Unicode code units) and ranges from0
tolength()
- 1
.If the
char
value specified at the given index is in the high-surrogate range, the following index is less than the length of thisString
, and thechar
value at the following index is in the low-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, thechar
value at the given index is returned.- Parameters:
index
- the index to thechar
values- Returns:
- the code point value of the character at the
index
- Throws:
IndexOutOfBoundsException
- if theindex
argument is negative or not less than the length of this string.- Since:
- 1.5
-
codePointBefore
public int codePointBefore(int index) Returns the character (Unicode code point) before the specified index. The index refers tochar
values (Unicode code units) and ranges from1
tolength
.If the
char
value at(index - 1)
is in the low-surrogate range,(index - 2)
is not negative, and thechar
value at(index - 2)
is in the high-surrogate range, then the supplementary code point value of the surrogate pair is returned. If thechar
value atindex - 1
is an unpaired low-surrogate or a high-surrogate, the surrogate value is returned.- Parameters:
index
- the index following the code point that should be returned- Returns:
- the Unicode code point value before the given index.
- Throws:
IndexOutOfBoundsException
- if theindex
argument is less than 1 or greater than the length of this string.- Since:
- 1.5
-
codePointCount
public int codePointCount(int beginIndex, int endIndex) Returns the number of Unicode code points in the specified text range of thisString
. The text range begins at the specifiedbeginIndex
and extends to thechar
at indexendIndex - 1
. Thus the length (inchar
s) of the text range isendIndex-beginIndex
. Unpaired surrogates within the text range count as one code point each.- Parameters:
beginIndex
- the index to the firstchar
of the text range.endIndex
- the index after the lastchar
of the text range.- Returns:
- the number of Unicode code points in the specified text range
- Throws:
IndexOutOfBoundsException
- if thebeginIndex
is negative, orendIndex
is larger than the length of thisString
, orbeginIndex
is larger thanendIndex
.- Since:
- 1.5
-
offsetByCodePoints
public int offsetByCodePoints(int index, int codePointOffset) Returns the index within thisString
that is offset from the givenindex
bycodePointOffset
code points. Unpaired surrogates within the text range given byindex
andcodePointOffset
count as one code point each.- Parameters:
index
- the index to be offsetcodePointOffset
- the offset in code points- Returns:
- the index within this
String
- Throws:
IndexOutOfBoundsException
- ifindex
is negative or larger than the length of thisString
, or ifcodePointOffset
is positive and the substring starting withindex
has fewer thancodePointOffset
code points, or ifcodePointOffset
is negative and the substring beforeindex
has fewer than the absolute value ofcodePointOffset
code points.- Since:
- 1.5
-
getChars
public void getChars(int srcBegin, int srcEnd, char[] dst, int dstBegin) Copies characters from this string into the destination character array.The first character to be copied is at index
srcBegin
; the last character to be copied is at indexsrcEnd-1
(thus the total number of characters to be copied issrcEnd-srcBegin
). The characters are copied into the subarray ofdst
starting at indexdstBegin
and ending at index:dstBegin + (srcEnd-srcBegin) - 1
- Parameters:
srcBegin
- index of the first character in the string to copy.srcEnd
- index after the last character in the string to copy.dst
- the destination array.dstBegin
- the start offset in the destination array.- Throws:
IndexOutOfBoundsException
- If any of the following is true:srcBegin
is negative.srcBegin
is greater thansrcEnd
srcEnd
is greater than the length of this stringdstBegin
is negativedstBegin+(srcEnd-srcBegin)
is larger thandst.length
-
getBytes
Deprecated.This method does not properly convert characters into bytes. As of JDK 1.1, the preferred way to do this is via thegetBytes()
method, which uses thedefault charset
.Copies characters from this string into the destination byte array. Each byte receives the 8 low-order bits of the corresponding character. The eight high-order bits of each character are not copied and do not participate in the transfer in any way.The first character to be copied is at index
srcBegin
; the last character to be copied is at indexsrcEnd-1
. The total number of characters to be copied issrcEnd-srcBegin
. The characters, converted to bytes, are copied into the subarray ofdst
starting at indexdstBegin
and ending at index:dstBegin + (srcEnd-srcBegin) - 1
- Parameters:
srcBegin
- Index of the first character in the string to copysrcEnd
- Index after the last character in the string to copydst
- The destination arraydstBegin
- The start offset in the destination array- Throws:
IndexOutOfBoundsException
- If any of the following is true:-
srcBegin
is negative -
srcBegin
is greater thansrcEnd
-
srcEnd
is greater than the length of this String -
dstBegin
is negative -
dstBegin+(srcEnd-srcBegin)
is larger thandst.length
-
-
getBytes
Encodes thisString
into a sequence of bytes using the named charset, storing the result into a new byte array.The behavior of this method when this string cannot be encoded in the given charset is unspecified. The
CharsetEncoder
class should be used when more control over the encoding process is required.- Parameters:
charsetName
- The name of a supported charset- Returns:
- The resultant byte array
- Throws:
UnsupportedEncodingException
- If the named charset is not supported- Since:
- 1.1
-
getBytes
Encodes thisString
into a sequence of bytes using the given charset, storing the result into a new byte array.This method always replaces malformed-input and unmappable-character sequences with this charset's default replacement byte array. The
CharsetEncoder
class should be used when more control over the encoding process is required.- Parameters:
charset
- The Charset to be used to encode theString
- Returns:
- The resultant byte array
- Since:
- 1.6
-
getBytes
public byte[] getBytes()Encodes thisString
into a sequence of bytes using thedefault charset
, storing the result into a new byte array.The behavior of this method when this string cannot be encoded in the default charset is unspecified. The
CharsetEncoder
class should be used when more control over the encoding process is required.- Returns:
- The resultant byte array
- Since:
- 1.1
-
equals
Compares this string to the specified object. The result istrue
if and only if the argument is notnull
and is aString
object that represents the same sequence of characters as this object.For finer-grained String comparison, refer to
Collator
. -
contentEquals
Compares this string to the specifiedStringBuffer
. The result istrue
if and only if thisString
represents the same sequence of characters as the specifiedStringBuffer
. This method synchronizes on theStringBuffer
.For finer-grained String comparison, refer to
Collator
.- Parameters:
sb
- TheStringBuffer
to compare thisString
against- Returns:
true
if thisString
represents the same sequence of characters as the specifiedStringBuffer
,false
otherwise- Since:
- 1.4
-
contentEquals
Compares this string to the specifiedCharSequence
. The result istrue
if and only if thisString
represents the same sequence of char values as the specified sequence. Note that if theCharSequence
is aStringBuffer
then the method synchronizes on it.For finer-grained String comparison, refer to
Collator
.- Parameters:
cs
- The sequence to compare thisString
against- Returns:
true
if thisString
represents the same sequence of char values as the specified sequence,false
otherwise- Since:
- 1.5
-
equalsIgnoreCase
Compares thisString
to anotherString
, ignoring case considerations. Two strings are considered equal ignoring case if they are of the same length and corresponding Unicode code points in the two strings are equal ignoring case.Two Unicode code points are considered the same ignoring case if at least one of the following is true:
- The two Unicode code points are the same (as compared by the
==
operator) - Calling
Character.toLowerCase(Character.toUpperCase(int))
on each Unicode code point produces the same result
Note that this method does not take locale into account, and will result in unsatisfactory results for certain locales. The
Collator
class provides locale-sensitive comparison.- Parameters:
anotherString
- TheString
to compare thisString
against- Returns:
true
if the argument is notnull
and it represents an equivalentString
ignoring case;false
otherwise- See Also:
- The two Unicode code points are the same (as compared by the
-
compareTo
Compares two strings lexicographically. The comparison is based on the Unicode value of each character in the strings. The character sequence represented by thisString
object is compared lexicographically to the character sequence represented by the argument string. The result is a negative integer if thisString
object lexicographically precedes the argument string. The result is a positive integer if thisString
object lexicographically follows the argument string. The result is zero if the strings are equal;compareTo
returns0
exactly when theequals(Object)
method would returntrue
.This is the definition of lexicographic ordering. If two strings are different, then either they have different characters at some index that is a valid index for both strings, or their lengths are different, or both. If they have different characters at one or more index positions, let k be the smallest such index; then the string whose character at position k has the smaller value, as determined by using the
<
operator, lexicographically precedes the other string. In this case,compareTo
returns the difference of the two character values at positionk
in the two string -- that is, the value:
If there is no index position at which they differ, then the shorter string lexicographically precedes the longer string. In this case,this.charAt(k)-anotherString.charAt(k)
compareTo
returns the difference of the lengths of the strings -- that is, the value:this.length()-anotherString.length()
For finer-grained String comparison, refer to
Collator
.- Specified by:
compareTo
in interfaceComparable<String>
- Parameters:
anotherString
- theString
to be compared.- Returns:
- the value
0
if the argument string is equal to this string; a value less than0
if this string is lexicographically less than the string argument; and a value greater than0
if this string is lexicographically greater than the string argument.
-
compareToIgnoreCase
Compares two strings lexicographically, ignoring case differences. This method returns an integer whose sign is that of callingcompareTo
with case folded versions of the strings where case differences have been eliminated by callingCharacter.toLowerCase(Character.toUpperCase(int))
on each Unicode code point.Note that this method does not take locale into account, and will result in an unsatisfactory ordering for certain locales. The
Collator
class provides locale-sensitive comparison.- Parameters:
str
- theString
to be compared.- Returns:
- a negative integer, zero, or a positive integer as the specified String is greater than, equal to, or less than this String, ignoring case considerations.
- Since:
- 1.2
- See Also:
-
regionMatches
Tests if two string regions are equal.A substring of this
String
object is compared to a substring of the argument other. The result is true if these substrings represent identical character sequences. The substring of thisString
object to be compared begins at indextoffset
and has lengthlen
. The substring of other to be compared begins at indexooffset
and has lengthlen
. The result isfalse
if and only if at least one of the following is true:toffset
is negative.ooffset
is negative.toffset+len
is greater than the length of thisString
object.ooffset+len
is greater than the length of the other argument.- There is some nonnegative integer k less than
len
such that:this.charAt(toffset +
k) != other.charAt(ooffset +
k)
Note that this method does not take locale into account. The
Collator
class provides locale-sensitive comparison.- Parameters:
toffset
- the starting offset of the subregion in this string.other
- the string argument.ooffset
- the starting offset of the subregion in the string argument.len
- the number of characters to compare.- Returns:
true
if the specified subregion of this string exactly matches the specified subregion of the string argument;false
otherwise.
-
regionMatches
Tests if two string regions are equal.A substring of this
String
object is compared to a substring of the argumentother
. The result istrue
if these substrings represent Unicode code point sequences that are the same, ignoring case if and only ifignoreCase
is true. The sequencestsequence
andosequence
are compared, wheretsequence
is the sequence produced as if by callingthis.substring(toffset, toffset + len).codePoints()
andosequence
is the sequence produced as if by callingother.substring(ooffset, ooffset + len).codePoints()
. The result istrue
if and only if all of the following are true:toffset
is non-negative.ooffset
is non-negative.toffset+len
is less than or equal to the length of thisString
object.ooffset+len
is less than or equal to the length of the other argument.- if
ignoreCase
isfalse
, all pairs of corresponding Unicode code points are equal integer values; or ifignoreCase
istrue
,Character.toLowerCase(
Character.toUpperCase(int)
)
on all pairs of Unicode code points results in equal integer values.
Note that this method does not take locale into account, and will result in unsatisfactory results for certain locales when
ignoreCase
istrue
. TheCollator
class provides locale-sensitive comparison.- Parameters:
ignoreCase
- iftrue
, ignore case when comparing characters.toffset
- the starting offset of the subregion in this string.other
- the string argument.ooffset
- the starting offset of the subregion in the string argument.len
- the number of characters (Unicode code units - 16bitchar
value) to compare.- Returns:
true
if the specified subregion of this string matches the specified subregion of the string argument;false
otherwise. Whether the matching is exact or case insensitive depends on theignoreCase
argument.- See Also:
-
startsWith
Tests if the substring of this string beginning at the specified index starts with the specified prefix.- Parameters:
prefix
- the prefix.toffset
- where to begin looking in this string.- Returns:
true
if the character sequence represented by the argument is a prefix of the substring of this object starting at indextoffset
;false
otherwise. The result isfalse
iftoffset
is negative or greater than the length of thisString
object; otherwise the result is the same as the result of the expressionthis.substring(toffset).startsWith(prefix)
-
startsWith
Tests if this string starts with the specified prefix.- Parameters:
prefix
- the prefix.- Returns:
true
if the character sequence represented by the argument is a prefix of the character sequence represented by this string;false
otherwise. Note also thattrue
will be returned if the argument is an empty string or is equal to thisString
object as determined by theequals(Object)
method.- Since:
- 1.0
-
endsWith
Tests if this string ends with the specified suffix.- Parameters:
suffix
- the suffix.- Returns:
true
if the character sequence represented by the argument is a suffix of the character sequence represented by this object;false
otherwise. Note that the result will betrue
if the argument is the empty string or is equal to thisString
object as determined by theequals(Object)
method.
-
hashCode
public int hashCode()Returns a hash code for this string. The hash code for aString
object is computed as
usings[0]*31^(n-1) + s[1]*31^(n-2) + ... + s[n-1]
int
arithmetic, wheres[i]
is the ith character of the string,n
is the length of the string, and^
indicates exponentiation. (The hash value of the empty string is zero.) -
indexOf
public int indexOf(int ch) Returns the index within this string of the first occurrence of the specified character. If a character with valuech
occurs in the character sequence represented by thisString
object, then the index (in Unicode code units) of the first such occurrence is returned. For values ofch
in the range from 0 to 0xFFFF (inclusive), this is the smallest value k such that:
is true. For other values ofthis.charAt(k) == ch
ch
, it is the smallest value k such that:
is true. In either case, if no such character occurs in this string, thenthis.codePointAt(k) == ch
-1
is returned.- Parameters:
ch
- a character (Unicode code point).- Returns:
- the index of the first occurrence of the character in the
character sequence represented by this object, or
-1
if the character does not occur.
-
indexOf
public int indexOf(int ch, int fromIndex) Returns the index within this string of the first occurrence of the specified character, starting the search at the specified index.If a character with value
ch
occurs in the character sequence represented by thisString
object at an index no smaller thanfromIndex
, then the index of the first such occurrence is returned. For values ofch
in the range from 0 to 0xFFFF (inclusive), this is the smallest value k such that:
is true. For other values of(this.charAt(k) == ch)
&&
(k >= fromIndex)ch
, it is the smallest value k such that:
is true. In either case, if no such character occurs in this string at or after position(this.codePointAt(k) == ch)
&&
(k >= fromIndex)fromIndex
, then-1
is returned.There is no restriction on the value of
fromIndex
. If it is negative, it has the same effect as if it were zero: this entire string may be searched. If it is greater than the length of this string, it has the same effect as if it were equal to the length of this string:-1
is returned.All indices are specified in
char
values (Unicode code units).- API Note:
- Unlike
substring(int)
, for example, this method does not throw an exception whenfromIndex
is outside the valid range. Rather, it returns -1 whenfromIndex
is larger than the length of the string. This result is, by itself, indistinguishable from a genuine absence ofch
in the string. If stricter behavior is needed,indexOf(int, int, int)
should be considered instead. On aString
s
, for example,s.indexOf(ch, fromIndex, s.length())
would throw iffromIndex
were larger than the string length, or were negative. - Parameters:
ch
- a character (Unicode code point).fromIndex
- the index to start the search from.- Returns:
- the index of the first occurrence of the character in the
character sequence represented by this object that is greater
than or equal to
fromIndex
, or-1
if the character does not occur.
-
indexOf
public int indexOf(int ch, int beginIndex, int endIndex) Returns the index within this string of the first occurrence of the specified character, starting the search atbeginIndex
and stopping beforeendIndex
.If a character with value
ch
occurs in the character sequence represented by thisString
object at an index no smaller thanbeginIndex
but smaller thanendIndex
, then the index of the first such occurrence is returned. For values ofch
in the range from 0 to 0xFFFF (inclusive), this is the smallest value k such that:
is true. For other values of(this.charAt(k) == ch) && (beginIndex <= k < endIndex)
ch
, it is the smallest value k such that:
is true. In either case, if no such character occurs in this string at or after position(this.codePointAt(k) == ch) && (beginIndex <= k < endIndex)
beginIndex
and before positionendIndex
, then-1
is returned.All indices are specified in
char
values (Unicode code units).- Parameters:
ch
- a character (Unicode code point).beginIndex
- the index to start the search from (included).endIndex
- the index to stop the search at (excluded).- Returns:
- the index of the first occurrence of the character in the
character sequence represented by this object that is greater
than or equal to
beginIndex
and less thanendIndex
, or-1
if the character does not occur. - Throws:
StringIndexOutOfBoundsException
- ifbeginIndex
is negative, orendIndex
is larger than the length of thisString
object, orbeginIndex
is larger thanendIndex
.- Since:
- 21
-
lastIndexOf
public int lastIndexOf(int ch) Returns the index within this string of the last occurrence of the specified character. For values ofch
in the range from 0 to 0xFFFF (inclusive), the index (in Unicode code units) returned is the largest value k such that:
is true. For other values ofthis.charAt(k) == ch
ch
, it is the largest value k such that:
is true. In either case, if no such character occurs in this string, thenthis.codePointAt(k) == ch
-1
is returned. TheString
is searched backwards starting at the last character.- Parameters:
ch
- a character (Unicode code point).- Returns:
- the index of the last occurrence of the character in the
character sequence represented by this object, or
-1
if the character does not occur.
-
lastIndexOf
public int lastIndexOf(int ch, int fromIndex) Returns the index within this string of the last occurrence of the specified character, searching backward starting at the specified index. For values ofch
in the range from 0 to 0xFFFF (inclusive), the index returned is the largest value k such that:
is true. For other values of(this.charAt(k) == ch)
&&
(k <= fromIndex)ch
, it is the largest value k such that:
is true. In either case, if no such character occurs in this string at or before position(this.codePointAt(k) == ch)
&&
(k <= fromIndex)fromIndex
, then-1
is returned.All indices are specified in
char
values (Unicode code units).- Parameters:
ch
- a character (Unicode code point).fromIndex
- the index to start the search from. There is no restriction on the value offromIndex
. If it is greater than or equal to the length of this string, it has the same effect as if it were equal to one less than the length of this string: this entire string may be searched. If it is negative, it has the same effect as if it were -1: -1 is returned.- Returns:
- the index of the last occurrence of the character in the
character sequence represented by this object that is less
than or equal to
fromIndex
, or-1
if the character does not occur before that point.
-
indexOf
Returns the index within this string of the first occurrence of the specified substring.The returned index is the smallest value
k
for which:
If no such value ofthis.startsWith(str, k)
k
exists, then-1
is returned.- Parameters:
str
- the substring to search for.- Returns:
- the index of the first occurrence of the specified substring,
or
-1
if there is no such occurrence.
-
indexOf
Returns the index within this string of the first occurrence of the specified substring, starting at the specified index.The returned index is the smallest value
k
for which:
If no such value ofk >= Math.min(fromIndex, this.length()) && this.startsWith(str, k)
k
exists, then-1
is returned.- API Note:
- Unlike
substring(int)
, for example, this method does not throw an exception whenfromIndex
is outside the valid range. Rather, it returns -1 whenfromIndex
is larger than the length of the string. This result is, by itself, indistinguishable from a genuine absence ofstr
in the string. If stricter behavior is needed,indexOf(String, int, int)
should be considered instead. OnString
s
and a non-emptystr
, for example,s.indexOf(str, fromIndex, s.length())
would throw iffromIndex
were larger than the string length, or were negative. - Parameters:
str
- the substring to search for.fromIndex
- the index from which to start the search.- Returns:
- the index of the first occurrence of the specified substring,
starting at the specified index,
or
-1
if there is no such occurrence.
-
indexOf
Returns the index of the first occurrence of the specified substring within the specified index range ofthis
string.This method returns the same result as the one of the invocation
if the index returned bys.substring(beginIndex, endIndex).indexOf(str) + beginIndex
indexOf(String)
is non-negative, and returns -1 otherwise. (No substring is instantiated, though.)- Parameters:
str
- the substring to search for.beginIndex
- the index to start the search from (included).endIndex
- the index to stop the search at (excluded).- Returns:
- the index of the first occurrence of the specified substring
within the specified index range,
or
-1
if there is no such occurrence. - Throws:
StringIndexOutOfBoundsException
- ifbeginIndex
is negative, orendIndex
is larger than the length of thisString
object, orbeginIndex
is larger thanendIndex
.- Since:
- 21
-
lastIndexOf
Returns the index within this string of the last occurrence of the specified substring. The last occurrence of the empty string "" is considered to occur at the index valuethis.length()
.The returned index is the largest value
k
for which:
If no such value ofthis.startsWith(str, k)
k
exists, then-1
is returned.- Parameters:
str
- the substring to search for.- Returns:
- the index of the last occurrence of the specified substring,
or
-1
if there is no such occurrence.
-
lastIndexOf
Returns the index within this string of the last occurrence of the specified substring, searching backward starting at the specified index.The returned index is the largest value
k
for which:
If no such value ofk <= Math.min(fromIndex, this.length()) && this.startsWith(str, k)
k
exists, then-1
is returned.- Parameters:
str
- the substring to search for.fromIndex
- the index to start the search from.- Returns:
- the index of the last occurrence of the specified substring,
searching backward from the specified index,
or
-1
if there is no such occurrence.
-
substring
Returns a string that is a substring of this string. The substring begins with the character at the specified index and extends to the end of this string.Examples:
"unhappy".substring(2) returns "happy" "Harbison".substring(3) returns "bison" "emptiness".substring(9) returns "" (an empty string)
- Parameters:
beginIndex
- the beginning index, inclusive.- Returns:
- the specified substring.
- Throws:
IndexOutOfBoundsException
- ifbeginIndex
is negative or larger than the length of thisString
object.
-
substring
Returns a string that is a substring of this string. The substring begins at the specifiedbeginIndex
and extends to the character at indexendIndex - 1
. Thus the length of the substring isendIndex-beginIndex
.Examples:
"hamburger".substring(4, 8) returns "urge" "smiles".substring(1, 5) returns "mile"
- Parameters:
beginIndex
- the beginning index, inclusive.endIndex
- the ending index, exclusive.- Returns:
- the specified substring.
- Throws:
IndexOutOfBoundsException
- if thebeginIndex
is negative, orendIndex
is larger than the length of thisString
object, orbeginIndex
is larger thanendIndex
.
-
subSequence
Returns a character sequence that is a subsequence of this sequence.An invocation of this method of the form
behaves in exactly the same way as the invocationstr.subSequence(begin, end)
str.substring(begin, end)
- Specified by:
subSequence
in interfaceCharSequence
- API Note:
- This method is defined so that the
String
class can implement theCharSequence
interface. - Parameters:
beginIndex
- the begin index, inclusive.endIndex
- the end index, exclusive.- Returns:
- the specified subsequence.
- Throws:
IndexOutOfBoundsException
- ifbeginIndex
orendIndex
is negative, ifendIndex
is greater thanlength()
, or ifbeginIndex
is greater thanendIndex
- Since:
- 1.4
-
concat
Concatenates the specified string to the end of this string.If the length of the argument string is
0
, then thisString
object is returned. Otherwise, aString
object is returned that represents a character sequence that is the concatenation of the character sequence represented by thisString
object and the character sequence represented by the argument string.Examples:
"cares".concat("s") returns "caress" "to".concat("get").concat("her") returns "together"
- Parameters:
str
- theString
that is concatenated to the end of thisString
.- Returns:
- a string that represents the concatenation of this object's characters followed by the string argument's characters.
-
replace
Returns a string resulting from replacing all occurrences ofoldChar
in this string withnewChar
.If the character
oldChar
does not occur in the character sequence represented by thisString
object, then a reference to thisString
object is returned. Otherwise, aString
object is returned that represents a character sequence identical to the character sequence represented by thisString
object, except that every occurrence ofoldChar
is replaced by an occurrence ofnewChar
.Examples:
"mesquite in your cellar".replace('e', 'o') returns "mosquito in your collar" "the war of baronets".replace('r', 'y') returns "the way of bayonets" "sparring with a purple porpoise".replace('p', 't') returns "starring with a turtle tortoise" "JonL".replace('q', 'x') returns "JonL" (no change)
- Parameters:
oldChar
- the old character.newChar
- the new character.- Returns:
- a string derived from this string by replacing every
occurrence of
oldChar
withnewChar
.
-
matches
Tells whether or not this string matches the given regular expression.An invocation of this method of the form str
.matches(
regex)
yields exactly the same result as the expressionPattern
.matches(regex, str)
- Parameters:
regex
- the regular expression to which this string is to be matched- Returns:
true
if, and only if, this string matches the given regular expression- Throws:
PatternSyntaxException
- if the regular expression's syntax is invalid- Since:
- 1.4
- See Also:
-
contains
Returns true if and only if this string contains the specified sequence of char values.- Parameters:
s
- the sequence to search for- Returns:
- true if this string contains
s
, false otherwise - Since:
- 1.5
-
replaceFirst
Replaces the first substring of this string that matches the given regular expression with the given replacement.An invocation of this method of the form str
.replaceFirst(
regex,
repl)
yields exactly the same result as the expressionPattern
.compile
(regex).matcher
(str).replaceFirst
(repl)Note that backslashes (
\
) and dollar signs ($
) in the replacement string may cause the results to be different than if it were being treated as a literal replacement string; seeMatcher.replaceFirst(java.lang.String)
. UseMatcher.quoteReplacement(java.lang.String)
to suppress the special meaning of these characters, if desired.- Parameters:
regex
- the regular expression to which this string is to be matchedreplacement
- the string to be substituted for the first match- Returns:
- The resulting
String
- Throws:
PatternSyntaxException
- if the regular expression's syntax is invalid- Since:
- 1.4
- See Also:
-
replaceAll
Replaces each substring of this string that matches the given regular expression with the given replacement.An invocation of this method of the form str
.replaceAll(
regex,
repl)
yields exactly the same result as the expressionPattern
.compile
(regex).matcher
(str).replaceAll
(repl)Note that backslashes (
\
) and dollar signs ($
) in the replacement string may cause the results to be different than if it were being treated as a literal replacement string; seeMatcher.replaceAll
. UseMatcher.quoteReplacement(java.lang.String)
to suppress the special meaning of these characters, if desired.- Parameters:
regex
- the regular expression to which this string is to be matchedreplacement
- the string to be substituted for each match- Returns:
- The resulting
String
- Throws:
PatternSyntaxException
- if the regular expression's syntax is invalid- Since:
- 1.4
- See Also:
-
replace
Replaces each substring of this string that matches the literal target sequence with the specified literal replacement sequence. The replacement proceeds from the beginning of the string to the end, for example, replacing "aa" with "b" in the string "aaa" will result in "ba" rather than "ab".- Parameters:
target
- The sequence of char values to be replacedreplacement
- The replacement sequence of char values- Returns:
- The resulting string
- Since:
- 1.5
-
split
Splits this string around matches of the given regular expression.The array returned by this method contains each substring of this string that is terminated by another substring that matches the given expression or is terminated by the end of the string. The substrings in the array are in the order in which they occur in this string. If the expression does not match any part of the input then the resulting array has just one element, namely this string.
When there is a positive-width match at the beginning of this string then an empty leading substring is included at the beginning of the resulting array. A zero-width match at the beginning however never produces such empty leading substring.
The
limit
parameter controls the number of times the pattern is applied and therefore affects the length of the resulting array.If the limit is positive then the pattern will be applied at most limit - 1 times, the array's length will be no greater than limit, and the array's last entry will contain all input beyond the last matched delimiter.
If the limit is zero then the pattern will be applied as many times as possible, the array can have any length, and trailing empty strings will be discarded.
If the limit is negative then the pattern will be applied as many times as possible and the array can have any length.
The string
"boo:and:foo"
, for example, yields the following results with these parameters:Regex Limit Result : 2 { "boo", "and:foo" }
5 { "boo", "and", "foo" }
-2 { "boo", "and", "foo" }
o 5 { "b", "", ":and:f", "", "" }
-2 { "b", "", ":and:f", "", "" }
0 { "b", "", ":and:f" }
An invocation of this method of the form str.
split(
regex,
n)
yields the same result as the expressionPattern
.compile
(regex).split
(str, n)- Parameters:
regex
- the delimiting regular expressionlimit
- the result threshold, as described above- Returns:
- the array of strings computed by splitting this string around matches of the given regular expression
- Throws:
PatternSyntaxException
- if the regular expression's syntax is invalid- Since:
- 1.4
- See Also:
-
splitWithDelimiters
Splits this string around matches of the given regular expression and returns both the strings and the matching delimiters.The array returned by this method contains each substring of this string that is terminated by another substring that matches the given expression or is terminated by the end of the string. Each substring is immediately followed by the subsequence (the delimiter) that matches the given expression, except for the last substring, which is not followed by anything. The substrings in the array and the delimiters are in the order in which they occur in the input. If the expression does not match any part of the input then the resulting array has just one element, namely this string.
When there is a positive-width match at the beginning of this string then an empty leading substring is included at the beginning of the resulting array. A zero-width match at the beginning however never produces such empty leading substring nor the empty delimiter.
The
limit
parameter controls the number of times the pattern is applied and therefore affects the length of the resulting array.- If the limit is positive then the pattern will be applied at most limit - 1 times, the array's length will be no greater than 2 × limit - 1, and the array's last entry will contain all input beyond the last matched delimiter.
- If the limit is zero then the pattern will be applied as many times as possible, the array can have any length, and trailing empty strings will be discarded.
- If the limit is negative then the pattern will be applied as many times as possible and the array can have any length.
The input
"boo:::and::foo"
, for example, yields the following results with these parameters:Regex Limit Result :+ 2 { "boo", ":::", "and::foo" }
5 { "boo", ":::", "and", "::", "foo" }
-1 { "boo", ":::", "and", "::", "foo" }
o 5 { "b", "o", "", "o", ":::and::f", "o", "", "o", "" }
-1 { "b", "o", "", "o", ":::and::f", "o", "", "o", "" }
0 { "b", "o", "", "o", ":::and::f", "o", "", "o" }
- API Note:
- An invocation of this method of the form
str.
splitWithDelimiters(
regex,
n)
yields the same result as the expressionPattern
.compile
(regex).splitWithDelimiters
(str, n) - Parameters:
regex
- the delimiting regular expressionlimit
- the result threshold, as described above- Returns:
- the array of strings computed by splitting this string around matches of the given regular expression, alternating substrings and matching delimiters
- Since:
- 21
-
split
Splits this string around matches of the given regular expression.This method works as if by invoking the two-argument
split
method with the given expression and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.The string
"boo:and:foo"
, for example, yields the following results with these expressions:Regex Result : { "boo", "and", "foo" }
o { "b", "", ":and:f" }
- Parameters:
regex
- the delimiting regular expression- Returns:
- the array of strings computed by splitting this string around matches of the given regular expression
- Throws:
PatternSyntaxException
- if the regular expression's syntax is invalid- Since:
- 1.4
- See Also:
-
join
Returns a new String composed of copies of theCharSequence elements
joined together with a copy of the specifieddelimiter
.For example,
Note that if an element is null, thenString message = String.join("-", "Java", "is", "cool"); // message returned is: "Java-is-cool"
"null"
is added.- Parameters:
delimiter
- the delimiter that separates each elementelements
- the elements to join together.- Returns:
- a new
String
that is composed of theelements
separated by thedelimiter
- Throws:
NullPointerException
- Ifdelimiter
orelements
isnull
- Since:
- 1.8
- See Also:
-
join
Returns a newString
composed of copies of theCharSequence elements
joined together with a copy of the specifieddelimiter
.For example,
Note that if an individual element isList<String> strings = List.of("Java", "is", "cool"); String message = String.join(" ", strings); // message returned is: "Java is cool" Set<String> strings = new LinkedHashSet<>(List.of("Java", "is", "very", "cool")); String message = String.join("-", strings); // message returned is: "Java-is-very-cool"
null
, then"null"
is added.- Parameters:
delimiter
- a sequence of characters that is used to separate each of theelements
in the resultingString
elements
- anIterable
that will have itselements
joined together.- Returns:
- a new
String
that is composed from theelements
argument - Throws:
NullPointerException
- Ifdelimiter
orelements
isnull
- Since:
- 1.8
- See Also:
-
toLowerCase
Converts all of the characters in thisString
to lower case using the rules of the givenLocale
. Case mapping is based on the Unicode Standard version specified by theCharacter
class. Since case mappings are not always 1:1 char mappings, the resultingString
and thisString
may differ in length.Examples of lowercase mappings are in the following table:
Language Code of Locale Upper Case Lower Case Description tr (Turkish) \u0130 \u0069 capital letter I with dot above -> small letter i tr (Turkish) \u0049 \u0131 capital letter I -> small letter dotless i (all) French Fries french fries lowercased all chars in String (all) ΙΧΘΥΣ ιχθυσ lowercased all chars in String - Parameters:
locale
- use the case transformation rules for this locale- Returns:
- the
String
, converted to lowercase. - Since:
- 1.1
- See Also:
-
toLowerCase
Converts all of the characters in thisString
to lower case using the rules of the default locale. This method is equivalent totoLowerCase(Locale.getDefault())
.- API Note:
- This method is locale sensitive, and may produce unexpected
results if used for strings that are intended to be interpreted locale
independently.
Examples are programming language identifiers, protocol keys, and HTML
tags.
For instance,
"TITLE".toLowerCase()
in a Turkish locale returns"t\u0131tle"
, where '\u0131' is the LATIN SMALL LETTER DOTLESS I character. To obtain correct results for locale insensitive strings, usetoLowerCase(Locale.ROOT)
. - Returns:
- the
String
, converted to lowercase. - See Also:
-
toUpperCase
Converts all of the characters in thisString
to upper case using the rules of the givenLocale
. Case mapping is based on the Unicode Standard version specified by theCharacter
class. Since case mappings are not always 1:1 char mappings, the resultingString
and thisString
may differ in length.Examples of locale-sensitive and 1:M case mappings are in the following table:
Language Code of Locale Lower Case Upper Case Description tr (Turkish) \u0069 \u0130 small letter i -> capital letter I with dot above tr (Turkish) \u0131 \u0049 small letter dotless i -> capital letter I (all) \u00df \u0053 \u0053 small letter sharp s -> two letters: SS (all) Fahrvergnügen FAHRVERGNÜGEN - Parameters:
locale
- use the case transformation rules for this locale- Returns:
- the
String
, converted to uppercase. - Since:
- 1.1
- See Also:
-
toUpperCase
Converts all of the characters in thisString
to upper case using the rules of the default locale. This method is equivalent totoUpperCase(Locale.getDefault())
.- API Note:
- This method is locale sensitive, and may produce unexpected
results if used for strings that are intended to be interpreted locale
independently.
Examples are programming language identifiers, protocol keys, and HTML
tags.
For instance,
"title".toUpperCase()
in a Turkish locale returns"T\u0130TLE"
, where '\u0130' is the LATIN CAPITAL LETTER I WITH DOT ABOVE character. To obtain correct results for locale insensitive strings, usetoUpperCase(Locale.ROOT)
. - Returns:
- the
String
, converted to uppercase. - See Also:
-
trim
Returns a string whose value is this string, with all leading and trailing space removed, where space is defined as any character whose codepoint is less than or equal to'U+0020'
(the space character).If this
String
object represents an empty character sequence, or the first and last characters of character sequence represented by thisString
object both have codes that are not space (as defined above), then a reference to thisString
object is returned.Otherwise, if all characters in this string are space (as defined above), then a
String
object representing an empty string is returned.Otherwise, let k be the index of the first character in the string whose code is not a space (as defined above) and let m be the index of the last character in the string whose code is not a space (as defined above). A
String
object is returned, representing the substring of this string that begins with the character at index k and ends with the character at index m-that is, the result ofthis.substring(k, m + 1)
.This method may be used to trim space (as defined above) from the beginning and end of a string.
- Returns:
- a string whose value is this string, with all leading and trailing space removed, or this string if it has no leading or trailing space.
-
strip
Returns a string whose value is this string, with all leading and trailing white space removed.If this
String
object represents an empty string, or if all code points in this string are white space, then an empty string is returned.Otherwise, returns a substring of this string beginning with the first code point that is not a white space up to and including the last code point that is not a white space.
This method may be used to strip white space from the beginning and end of a string.
- Returns:
- a string whose value is this string, with all leading and trailing white space removed
- Since:
- 11
- See Also:
-
stripLeading
Returns a string whose value is this string, with all leading white space removed.If this
String
object represents an empty string, or if all code points in this string are white space, then an empty string is returned.Otherwise, returns a substring of this string beginning with the first code point that is not a white space up to and including the last code point of this string.
This method may be used to trim white space from the beginning of a string.
- Returns:
- a string whose value is this string, with all leading white space removed
- Since:
- 11
- See Also:
-
stripTrailing
Returns a string whose value is this string, with all trailing white space removed.If this
String
object represents an empty string, or if all characters in this string are white space, then an empty string is returned.Otherwise, returns a substring of this string beginning with the first code point of this string up to and including the last code point that is not a white space.
This method may be used to trim white space from the end of a string.
- Returns:
- a string whose value is this string, with all trailing white space removed
- Since:
- 11
- See Also:
-
isBlank
public boolean isBlank()- Returns:
true
if the string is empty or contains only white space codepoints, otherwisefalse
- Since:
- 11
- See Also:
-
lines
Returns a stream of lines extracted from this string, separated by line terminators.A line terminator is one of the following: a line feed character
"\n"
(U+000A), a carriage return character"\r"
(U+000D), or a carriage return followed immediately by a line feed"\r\n"
(U+000D U+000A).A line is either a sequence of zero or more characters followed by a line terminator, or it is a sequence of one or more characters followed by the end of the string. A line does not include the line terminator.
The stream returned by this method contains the lines from this string in the order in which they occur.
- API Note:
- This definition of line implies that an empty string has zero lines and that there is no empty line following a line terminator at the end of a string.
- Implementation Note:
- This method provides better performance than split("\R") by supplying elements lazily and by faster search of new line terminators.
- Returns:
- the stream of lines extracted from this string
- Since:
- 11
-
indent
Adjusts the indentation of each line of this string based on the value ofn
, and normalizes line termination characters.This string is conceptually separated into lines using
lines()
. Each line is then adjusted as described below and then suffixed with a line feed"\n"
(U+000A). The resulting lines are then concatenated and returned.If
n > 0
thenn
spaces (U+0020) are inserted at the beginning of each line.If
n < 0
then up ton
white space characters are removed from the beginning of each line. If a given line does not contain sufficient white space then all leading white space characters are removed. Each white space character is treated as a single character. In particular, the tab character"\t"
(U+0009) is considered a single character; it is not expanded.If
n == 0
then the line remains unchanged. However, line terminators are still normalized.- Parameters:
n
- number of leading white space characters to add or remove- Returns:
- string with indentation adjusted and line endings normalized
- Since:
- 12
- See Also:
-
stripIndent
Returns a string whose value is this string, with incidental white space removed from the beginning and end of every line.Incidental white space is often present in a text block to align the content with the opening delimiter. For example, in the following code, dots represent incidental white space:
This method treats the incidental white space as indentation to be stripped, producing a string that preserves the relative indentation of the content. Using | to visualize the start of each line of the string:String html = """ ..............<html> .............. <body> .............. <p>Hello, world</p> .............. </body> ..............</html> ..............""";
First, the individual lines of this string are extracted. A line is a sequence of zero or more characters followed by either a line terminator or the end of the string. If the string has at least one line terminator, the last line consists of the characters between the last terminator and the end of the string. Otherwise, if the string has no terminators, the last line is the start of the string to the end of the string, in other words, the entire string. A line does not include the line terminator.|<html> | <body> | <p>Hello, world</p> | </body> |</html>
Then, the minimum indentation (min) is determined as follows:
For each non-blank line (as defined by
isBlank()
), the leading white space characters are counted.The leading white space characters on the last line are also counted even if blank.
The min value is the smallest of these counts.
For each non-blank line, min leading white space characters are removed, and any trailing white space characters are removed. Blank lines are replaced with the empty string.
Finally, the lines are joined into a new string, using the LF character
"\n"
(U+000A) to separate lines.- API Note:
- This method's primary purpose is to shift a block of lines as far as possible to the left, while preserving relative indentation. Lines that were indented the least will thus have no leading white space. The result will have the same number of line terminators as this string. If this string ends with a line terminator then the result will end with a line terminator.
- Implementation Requirements:
- This method treats all white space characters as having equal width. As long as the indentation on every line is consistently composed of the same character sequences, then the result will be as described above.
- Returns:
- string with incidental indentation removed and line terminators normalized
- Since:
- 15
- See Also:
-
translateEscapes
Returns a string whose value is this string, with escape sequences translated as if in a string literal.Escape sequences are translated as follows;
Escape Name Translation \b
backspace U+0008
\t
horizontal tab U+0009
\n
line feed U+000A
\f
form feed U+000C
\r
carriage return U+000D
\s
space U+0020
\"
double quote U+0022
\'
single quote U+0027
\\
backslash U+005C
\0 - \377
octal escape code point equivalents \<line-terminator>
continuation discard - Implementation Note:
- This method does not translate Unicode escapes such as "
\u2022
". Unicode escapes are translated by the Java compiler when reading input characters and are not part of the string literal specification. - Returns:
- String with escape sequences translated.
- Throws:
IllegalArgumentException
- when an escape sequence is malformed.- See Java Language Specification:
-
3.10.7 Escape Sequences
- Since:
- 15
-
transform
This method allows the application of a function tothis
string. The function should expect a single String argument and produce anR
result.Any exception thrown by
f.apply()
will be propagated to the caller.- Type Parameters:
R
- the type of the result- Parameters:
f
- a function to apply- Returns:
- the result of applying the function to this string
- Since:
- 12
- See Also:
-
toString
This object (which is already a string!) is itself returned.- Specified by:
toString
in interfaceCharSequence
- Overrides:
toString
in classObject
- Returns:
- the string itself.
-
chars
Returns a stream ofint
zero-extending thechar
values from this sequence. Any char which maps to a surrogate code point is passed through uninterpreted.- Specified by:
chars
in interfaceCharSequence
- Returns:
- an IntStream of char values from this sequence
- Since:
- 9
-
codePoints
Returns a stream of code point values from this sequence. Any surrogate pairs encountered in the sequence are combined as if by Character.toCodePoint and the result is passed to the stream. Any other code units, including ordinary BMP characters, unpaired surrogates, and undefined code units, are zero-extended toint
values which are then passed to the stream.- Specified by:
codePoints
in interfaceCharSequence
- Returns:
- an IntStream of Unicode code points from this sequence
- Since:
- 9
-
toCharArray
public char[] toCharArray()Converts this string to a new character array.- Returns:
- a newly allocated character array whose length is the length of this string and whose contents are initialized to contain the character sequence represented by this string.
-
format
Returns a formatted string using the specified format string and arguments.The locale always used is the one returned by
Locale.getDefault(Locale.Category)
withFORMAT
category specified.- Parameters:
format
- A format stringargs
- Arguments referenced by the format specifiers in the format string. If there are more arguments than format specifiers, the extra arguments are ignored. The number of arguments is variable and may be zero. The maximum number of arguments is limited by the maximum dimension of a Java array as defined by The Java Virtual Machine Specification. The behaviour on anull
argument depends on the conversion.- Returns:
- A formatted string
- Throws:
IllegalFormatException
- If a format string contains an illegal syntax, a format specifier that is incompatible with the given arguments, insufficient arguments given the format string, or other illegal conditions. For specification of all possible formatting errors, see the Details section of the formatter class specification.- Since:
- 1.5
- See Also:
-
format
Returns a formatted string using the specified locale, format string, and arguments.- Parameters:
l
- The locale to apply during formatting. Ifl
isnull
then no localization is applied.format
- A format stringargs
- Arguments referenced by the format specifiers in the format string. If there are more arguments than format specifiers, the extra arguments are ignored. The number of arguments is variable and may be zero. The maximum number of arguments is limited by the maximum dimension of a Java array as defined by The Java Virtual Machine Specification. The behaviour on anull
argument depends on the conversion.- Returns:
- A formatted string
- Throws:
IllegalFormatException
- If a format string contains an illegal syntax, a format specifier that is incompatible with the given arguments, insufficient arguments given the format string, or other illegal conditions. For specification of all possible formatting errors, see the Details section of the formatter class specification- Since:
- 1.5
- See Also:
-
formatted
Formats using this string as the format string, and the supplied arguments.- Implementation Requirements:
- This method is equivalent to
String.format(this, args)
. - Parameters:
args
- Arguments referenced by the format specifiers in this string.- Returns:
- A formatted string
- Since:
- 15
- See Also:
-
valueOf
-
valueOf
Returns the string representation of thechar
array argument. The contents of the character array are copied; subsequent modification of the character array does not affect the returned string.The contents of the string are unspecified if the character array is modified during string construction.
- Parameters:
data
- the character array.- Returns:
- a
String
that contains the characters of the character array.
-
valueOf
Returns the string representation of a specific subarray of thechar
array argument.The
offset
argument is the index of the first character of the subarray. Thecount
argument specifies the length of the subarray. The contents of the subarray are copied; subsequent modification of the character array does not affect the returned string.The contents of the string are unspecified if the character array is modified during string construction.
- Parameters:
data
- the character array.offset
- initial offset of the subarray.count
- length of the subarray.- Returns:
- a
String
that contains the characters of the specified subarray of the character array. - Throws:
IndexOutOfBoundsException
- ifoffset
is negative, orcount
is negative, oroffset+count
is larger thandata.length
.
-
copyValueOf
Equivalent tovalueOf(char[], int, int)
.- Parameters:
data
- the character array.offset
- initial offset of the subarray.count
- length of the subarray.- Returns:
- a
String
that contains the characters of the specified subarray of the character array. - Throws:
IndexOutOfBoundsException
- ifoffset
is negative, orcount
is negative, oroffset+count
is larger thandata.length
.
-
copyValueOf
Equivalent tovalueOf(char[])
.- Parameters:
data
- the character array.- Returns:
- a
String
that contains the characters of the character array.
-
valueOf
Returns the string representation of theboolean
argument.- Parameters:
b
- aboolean
.- Returns:
- if the argument is
true
, a string equal to"true"
is returned; otherwise, a string equal to"false"
is returned.
-
valueOf
Returns the string representation of thechar
argument.- Parameters:
c
- achar
.- Returns:
- a string of length
1
containing as its single character the argumentc
.
-
valueOf
Returns the string representation of theint
argument.The representation is exactly the one returned by the
Integer.toString
method of one argument.- Parameters:
i
- anint
.- Returns:
- a string representation of the
int
argument. - See Also:
-
valueOf
Returns the string representation of thelong
argument.The representation is exactly the one returned by the
Long.toString
method of one argument.- Parameters:
l
- along
.- Returns:
- a string representation of the
long
argument. - See Also:
-
valueOf
Returns the string representation of thefloat
argument.The representation is exactly the one returned by the
Float.toString
method of one argument.- Parameters:
f
- afloat
.- Returns:
- a string representation of the
float
argument. - See Also:
-
valueOf
Returns the string representation of thedouble
argument.The representation is exactly the one returned by the
Double.toString
method of one argument.- Parameters:
d
- adouble
.- Returns:
- a string representation of the
double
argument. - See Also:
-
intern
Returns a canonical representation for the string object.A pool of strings, initially empty, is maintained privately by the class
String
.When the intern method is invoked, if the pool already contains a string equal to this
String
object as determined by theequals(Object)
method, then the string from the pool is returned. Otherwise, thisString
object is added to the pool and a reference to thisString
object is returned.It follows that for any two strings
s
andt
,s.intern() == t.intern()
istrue
if and only ifs.equals(t)
istrue
.All literal strings and string-valued constant expressions are interned. String literals are defined in section 3.10.5 of the The Java Language Specification.
- Returns:
- a string that has the same contents as this string, but is guaranteed to be from a pool of unique strings.
-
repeat
Returns a string whose value is the concatenation of this string repeatedcount
times.If this string is empty or count is zero then the empty string is returned.
- Parameters:
count
- number of times to repeat- Returns:
- A string composed of this string repeated
count
times or the empty string if this string is empty or count is zero - Throws:
IllegalArgumentException
- if thecount
is negative.- Since:
- 11
-
describeConstable
-
resolveConstantDesc
Resolves this instance as aConstantDesc
, the result of which is the instance itself.- Specified by:
resolveConstantDesc
in interfaceConstantDesc
- Parameters:
lookup
- ignored- Returns:
- the String instance
- Since:
- 12
-