5 Next Steps After Configuring the Domain
- Performing Basic Administrative Tasks
After you configure your new domain, there are administration tasks that Oracle recommends you perform on the domain. - Performing Additional Domain Configuration Tasks
Review additional configuration tasks you will likely want to perform on a new domain. - Preparing Your Environment for High Availability
Scaling out for high availability requires additional steps. - Configuring WebCenter Content User Interface on Additional Nodes
If you install WebCenter Content User Interface on one node, its configuration is complete. However, if you scale out WebCenter Content User Interface to a second node (in a high availability or enterprise deployment topology, for example), you must complete additional configuration steps. - Setting the WebCenter Content User Interface Server Socket Port
If you are scaling out WebCenter Content User Interface you must change the server socket port. - Configuring WebCenter Content User Interface Settings
You set WebCenter Content User Interface connection and configuration settings with WLST or Fusion Middleware Control.
Performing Basic Administrative Tasks
After you configure your new domain, there are administration tasks that Oracle recommends you perform on the domain.
The following table lists common administration tasks to perform on your new domain.
Table 5-1 Basic Administration Tasks for a New Domain
Task | Description | More Information |
---|---|---|
Getting familiar with Fusion Middleware administration tools |
Get familiar with various tools that you can use to manage your environment. |
See Overview of Oracle Fusion Middleware Administration Tools in Oracle Fusion Middleware Administering Oracle Fusion Middleware. |
Starting and stopping products and servers |
Learn how to start and stop Oracle Fusion Middleware, including the Administration Server, Managed Servers, and components. |
See Starting and Stopping Oracle Fusion Middleware in Oracle Fusion Middleware Administering Oracle Fusion Middleware. |
Configuring Secure Sockets Layer (SSL) |
Learn how to set up secure communications between Oracle Fusion Middleware components using SSL. |
See Configuring SSL in Oracle Fusion Middleware in Oracle Fusion Middleware Administering Oracle Fusion Middleware. |
Monitoring Oracle Fusion Middleware |
Learn how to keep track of the status of Oracle Fusion Middleware components. |
See Monitoring Oracle Fusion Middleware in Oracle Fusion Middleware Administering Oracle Fusion Middleware. |
Understanding Backup and Recovery Procedures |
Learn recommended backup and recovery procedures for Oracle Fusion Middleware. |
See Introducing Backup and Recovery in Oracle Fusion Middleware Administering Oracle Fusion Middleware. |
Parent topic: Next Steps After Configuring the Domain
Performing Additional Domain Configuration Tasks
Review additional configuration tasks you will likely want to perform on a new domain.
Table 5-2 Additional Domain Configuration Tasks
Task | Description | More Information |
---|---|---|
Deploying Applications |
Learn how to deploy your applications to Oracle Fusion Middleware. |
See Deploying Applications in Oracle Fusion Middleware Administering Oracle Fusion Middleware. |
Adding a Web Tier front-end to your domain |
Oracle Web Tier hosts Web pages (static and dynamic), provides security and high performance along with built-in clustering, load balancing, and failover features. In particular, the Web Tier contains Oracle HTTP Server. |
To install and configure Oracle HTTP Server in the WebLogic Server domain, see Configuring Oracle HTTP Server in a WebLogic Server Domain in Oracle Fusion Middleware Installing and Configuring Oracle HTTP Server. See also Installing Multiple Products in the Same Domain for important information. |
Tuning and configuring Coherence for your topology |
The standard installation topology includes a Coherence cluster that contains storage-enabled Managed Coherence Servers. This configuration is a good starting point for using Coherence, but depending upon your specific requirements, consider tuning and reconfiguring Coherence to improve performance in a production environment. |
For more information about Coherence clusters, see Configuring and Managing Coherence Clusters in Oracle Fusion Middleware Administering Clusters for Oracle WebLogic Server. For information on tuning Coherence, see Performance Tuning in Oracle Fusion Middleware Administering Oracle Coherence. For information on storing HTTP session data in Coherence, see Using Coherence*Web with WebLogic Server in Oracle Fusion Middleware Administering HTTP Session Management with Oracle Coherence*Web. For more about creating and deploying Coherence applications, see Getting Started in Oracle Fusion Middleware Developing Oracle Coherence Applications for Oracle WebLogic Server. |
Parent topic: Next Steps After Configuring the Domain
Preparing Your Environment for High Availability
Scaling out for high availability requires additional steps.
Table 5-3 provides a list of tasks to perform if you want to scale out your standard installation environment for high availability.
Table 5-3 Tasks Required to Prepare Your Environment for High Availability
Task | Description | More Information |
---|---|---|
Scaling out to multiple host computers |
To enable high availability, it is important to provide failover capabilities to another host computer. That way, if one computer goes down, your environment can continue to serve the consumers of your deployed applications. |
See Scaling Out a Topology (Machine Scale Out) in the Oracle Fusion Middleware High Availability Guide. |
Configuring high availability for your Web Tier components. |
If you have added a Web tier front-end, then you must configure the Web Tier for high availability, as well as the WebLogic Server software. |
See Configuring High Availability for Web Tier Components in Oracle Fusion Middleware High Availability Guide. |
Setting up a front-end load balancer |
A load balancer can be used to distribute requests across servers more evenly. |
See Server Load Balancing in a High Availability Environment and Configuring Load Balancer Virtual Server Names and Ports in Oracle Fusion Middleware High Availability Guide. |
Configuring Node Manager |
Node Manager enables you to start, shut down, and restart the Administration Server and Managed Server instances from a remote location. This document assumes you have configured a per-domain Node Manager. Review the Node Manager documentation, for information on advanced Node Manager configuration options and features. |
See Advanced Node Manager Configuration in Oracle Fusion Middleware Administering Node Manager for Oracle WebLogic Server. |
Parent topic: Next Steps After Configuring the Domain
Configuring WebCenter Content User Interface on Additional Nodes
If you install WebCenter Content User Interface on one node, its configuration is complete. However, if you scale out WebCenter Content User Interface to a second node (in a high availability or enterprise deployment topology, for example), you must complete additional configuration steps.
-
Enable WebCenter Content User Interface components.
-
Set the server socket port to 4444.
- Sign in to WebCenter Content as a WebCenter Content administrator.
- From the Administration tray or menu, choose Admin Server, then Component Manager.
- On the Component Manager page, select all three components under WebCenter Content UI Components:
- AutoSuggestConfig
- DynamicConverter
- FrameworkFolders
- Click Update then click OK to confirm that you want to enable the components.
- Restart WebCenter Content. See Starting and Stopping Managed Servers in Oracle Fusion Middleware Administering Oracle Fusion Middleware.
Parent topic: Next Steps After Configuring the Domain
Setting the WebCenter Content User Interface Server Socket Port
If you are scaling out WebCenter Content User Interface you must change the server socket port.
Parent topic: Next Steps After Configuring the Domain
Configuring WebCenter Content User Interface Settings
You set WebCenter Content User Interface connection and configuration settings with WLST or Fusion Middleware Control.
- Setting Connection Attributes with WLST
You can usedisplayRIDCConnection
andupdateRIDCConnection
WLST commands to read and update connection properties. - Setting Connection Attributes with Fusion Middleware Control
Instead of using WLST, you can set connection attributes for WebCenter Content User Interface Managed Server with the Fusion Middleware Control System MBean Browser. - Setting Configuration Attributes with WLST
You can use WLST commandsdisplayWccAdfConfig
andupdateWccAdfConfig
to read and update WebCenter Content User Interface configuration parameters. - Setting Configuration Attributes with Fusion Middleware Control
Instead of using WLST, you can set configuration (WccAdfConfiguration) attributes for WebCenter Content User Interface Managed Server with the Fusion Middleware Control System MBean Browser.
Parent topic: Next Steps After Configuring the Domain
Setting Connection Attributes with WLST
You can use displayRIDCConnection
and updateRIDCConnection
WLST commands to read and update connection properties.
Parent topic: Configuring WebCenter Content User Interface Settings
Setting Connection Attributes with Fusion Middleware Control
Instead of using WLST, you can set connection attributes for WebCenter Content User Interface Managed Server with the Fusion Middleware Control System MBean Browser.
Parent topic: Configuring WebCenter Content User Interface Settings
Setting Configuration Attributes with WLST
You can use WLST commands displayWccAdfConfig
and updateWccAdfConfig
to read and update WebCenter Content User Interface configuration parameters.
updateWccAdfConfig
to update the application’s URL:
Parent topic: Configuring WebCenter Content User Interface Settings
Setting Configuration Attributes with Fusion Middleware Control
Instead of using WLST, you can set configuration (WccAdfConfiguration) attributes for WebCenter Content User Interface Managed Server with the Fusion Middleware Control System MBean Browser.
- Sign in to Fusion Middleware Control for the WebCenter Content User Interface Managed Server.
- In the navigation tree on the left, expand WebLogic Domain, then the WebCenter Content User Interface domain folder, then the cluster name, and then click Managed Server name.
- From the WebLogic Domain drop-down menu at the top of the Managed Server page, choose System MBean Browser.
- In the System MBean Browser navigation tree, navigate to the WccAdfConfiguration MBean. To do this, expand Application Defined MBeans —> oracle.adf.share.config —> Server: WCCADF_server1 —> Application: Oracle WebCenter Content – Web UI. Expand the folder ADFConfig, the Mbean ADFConfig , then the folder ADFConfig.
- Instead of opening up a series of folders to reach the MBean, you can enter the connection name WccAdfConfiguration in the MBean filtered search.
- Click the MBean WccAdfConfiguration.
- In the Attributes tab, select ApplicationUrl. In the Value field, enter the base application URL. For example:
https://wcc.example.com:16225
. Click Apply (top right) - Go back to the ADFConfig MBean page (Application Defined MBeans —> oracle.adf.share.config —> Server: WCCADF_server1 —> Application: Oracle WebCenter Content – Web UI —> ADFConfig).
- On the Operations tab, click save then Invoke.
- Restart the WebCenter Content User Interface Managed Server.
Parent topic: Configuring WebCenter Content User Interface Settings