Oracle Dual Port 25/100 Gb Mellanox Ethernet Adapter Product Information
The content in this document applies to the following Oracle Dual Port 25/100 Gb Mellanox
Ethernet Adapters:
-
Oracle Dual Port 25 Gb Mellanox Ethernet Adapter
-
Oracle Dual Port 100 Gb Mellanox Ethernet Adapter
Note -
Performance may be limited depending on the server configuration in which the
100 GbE Adapter Card is being used. Maximum performance of the 100 GbE Adapter
Card can only be achieved on systems supporting PCIe 4.0 with 16 data lanes.
-
Oracle Dual Port 100 Gb Ethernet Adapter, Mellanox for Mezzanine form factor (for
factory installation) (X86 Support Only)
Note -
The Dual Port 25/100 Gb Mellanox Ethernet Adapters are based on the Mellanox
ConnectX®-5 integrated circuit devices.
For the most updated information about supported firmware and operating systems, important
operating notes, and known issues, refer to the latest Product Notes document, which is
available in the Oracle Dual Port 25/100 Gb Mellanox Ethernet Adapter Documentation Library at https://docs.oracle.com/en/networking/ethernet/dual-port-25-100-ethernet-adapter/.
Servers and Operating Systems Supported
The Oracle Dual Port 25/100 Gb Mellanox Ethernet Adapter support the following servers and operating systems .
|
|
|
|
|
|
-
Oracle Linux 8 Update 3 with the Unbreakable Enterprise
Kernel Release 6 (UEK 6) Update 2, UEK 5Update 5
-
Oracle Linux 7 Update 9 with UEK 6 Update 2, UEK 5 Update
5
-
Windows Server 2019, 2016
-
VMware ESXi 7 Update 2
-
VMware ESXi 6.7 Update 3
-
Oracle Solaris 11.4 SRU33
|
2
|
2
|
1
|
-
Oracle SPARC T8-1 Server
-
Oracle SPARC T8-2 Server
-
Oracle SPARC T8-4 Server
-
Oracle SPARC M8-8 Server
|
-
Oracle Solaris 11.4 SRU33 (minimum version
required for Oracle Solaris operation)
-
Oracle Solaris 11.4 SRU36 (minimum version
required to use Oracle Hardware Management Pack (HMP)
Firmware Update tool v2.4.8.0 )
|
Not Applicable
|
-
(SPARC T8-1) 2
-
(SPARC T8-2) 4
-
(SPARC T8-4) 4
-
(SPARC M8-8) 8
|
Not Applicable
|
|
Other servers and processors might be added to this list in the future, if they
qualify. Check your server Product Notes for confirmation that your server has
subsequently been qualified for device support.
Note -
Refer to your server Product Notes for up-to date information on supported
servers, operating systems, and required patchsets.
Minimum Supported Oracle Dual Port 25/100 Gb Mellanox Ethernet Adapter Firmware Version
The Oracle Dual Port 25/100 Gb Mellanox Ethernet Adapter minimum supported firmware
version is 16.29.1414.
To obtain the latest adapter firmware (FW bin file), go to:
Host Firmware Supported
The Oracle Dual Port 25/100 Gb Mellanox Ethernet Adapter supports the minimum required host firmware described in the
following tables.
For the latest software releases, refer to the supported server Product Notes.
|
|
Oracle Server X9-2
|
Oracle Server X9-2 SW 1.1.0 - FIRMWARE PACK
|
Oracle Server X9-2L
|
Oracle Server X9-2L SW 1.1.0 - FIRMWARE PACK
|
Oracle Storage Appliance ZS9-2
|
Oracle Storage Appliance ZS9-2 SW 1.1.0 - FIRMWARE PACK
|
Oracle SPARC T8-1, T8-2, T8-4, and M8-8 Servers
|
Oracle SPARC T8 and M8 Series Servers: System Firmware 9.10.3.
|
|
Ethernet Transceivers and Cables Supported
The following table describes the Ethernet transceivers and cables supported by
Oracle Dual Port 25/100 Gb Mellanox Ethernet Adapter.
|
|
|
|
25 GbE
|
1 Gbps, 10 Gbps, 25 Gbps
|
N/A
|
-
SFP28 Twinax passive copper cable.
Cable Lengths: 1, 2, 3, and 5 meters.
|
10 Gbps
|
SFP+SR
|
|
10 Gbps
|
SFP+ LR
|
Duplex LC Terminated Single-mode Fiber OS1.
Cable Length: 10 kilometers maximum
|
25 Gbps
|
SFP28 SR
|
-
Duplex LC Terminated Multi-mode Fiber OM3.
Cable Length: 70 meters maximum
-
Duplex LC Terminated Multi mode Fiber OM 4
Cable Length: 100 meter
|
25 Gbps
|
SFP28 LR
|
Duplex LC Terminated Single-mode Fiber OS1.
Cable Length: 10 kilometers maximum
|
10 Gbps, 25 Gbps
|
Dual Rate SFP28 SR
|
-
Duplex LC Terminated Multi-mode Fiber OM3.
Cable Length: 70 meters maximum
-
Duplex LC Terminated Multi-mode Fiber OM4.
Cable Length: 100 meter maximum
|
100 GbE
|
10 Gbps, 25 Gbps, 40 Gbps, 100 Gbps
|
N/A
|
DAC Copper Cable assembly.
Cable Lengths: 3 meters or 5 meters
|
100 Gbs
|
QSFP28 SR
|
Fiber Optical cable assembly: MT ferrule terminated, 12-fiber,
multimode, MPO.
Cable Lengths: 10, 20, 50, or 100 meters
|
|