Management Services and Network Default Properties

To help make the process for deploying a server simple and straightforward, Oracle ILOM is shipped preconfigured with most management service ports and standard network connectivity properties enabled. However, to maximize security and to prevent unauthorized access to Oracle ILOM, you should disable properties for any management service ports that are not required.

Note:

The default properties in Oracle ILOM are customer-configurable after establishing a management connection to Oracle ILOM.

Table 2-3 Management Services Enabled by Default
Table 2-4 Network Connectivity Properties Enabled by Default

Table 2-3 Management Services Enabled by Default

Management Access	Default Properties	Service Port	To modify configurable properties, see;
Web Server: Mode	Redirect HTTP Connection to HTTPS	80	Web Server Configuration Properties
Web Server: State	HTTPS, Enabled	443	Web Server Configuration Properties
Web Server: SSL	Later firmware versions of Oracle ILOM ) TLS v1.2 Enabled Default SSL certificate Default SSL self-signing private key	-	SSL Certificate and Private Key Configuration Properties for HTTPS Web Server
IPMI: State	Enabled	623	IPMI Service Configuration Properties Note. For a higher level of security, Oracle ILOM IPMI clients should always support and operate in IPMI 2.0 mode.
SNMP: State	SNMPv3, Enabled	161	SNMP Configuration Properties
Single Sign On	Enabled	11626	Single Sign-On Service (Enabled by Default)
Secure Shell (SSH)	Enabled RSA and DSA Key Generation	22	SSH Server Configuration Properties
Remote KVMS Redirection (video, keyboard, mouse, and storage)	Enabled	5120-5123, 5555, 5556, 7578, 7579	Using Remote KVMS Consoles for Host Server Redirection
Service tag^Foot 1	Enabled	6481	Servicetag Service Configuration Properties

^Footnote 1

An Oracle discovery protocol that identifies servers and provides integration to Oracle service solutions.

Note:

For a complete list of default network ports used by Oracle ILOM, see Default Network Ports Used by Oracle ILOM.

Table 2-4 Network Connectivity Properties Enabled by Default

Network Connectivity Property	Default Value	To modify configurable properties, see:
Network: State	Enabled	Network Connectivity Standard Configuration Properties
IPv4: Mode	DHCP, enabled	Network Connectivity Standard Configuration Properties
IPv6: State	Enabled	Network Connectivity Standard Configuration Properties
IPv6: Mode	Auto-Config, Stateless	Network Connectivity Standard Configuration Properties
Management Port:	Dedicated Network Management (MGMT)	Network Connectivity Standard Configuration Properties
Local Host Interconnect	Host Utilities Managed: Enabled State: Disabled	Dedicated Interconnect SP Management Connection
DNS	Auto DNS via DHCP, Enabled	DNS Configuration Properties
Serial Port	Owner: Service Processor Baud Rate: 9600 Host Flow Control: None	Serial Port Configuration Properties
User Authentication^Foot 2	Root user account: root Root password: `changeme` Permitted local accounts: Up to 10 customer-configurable user accounts Single Sign On: Enabled for remote KVMS.	Managing User Credentials

^Footnote 2

The property states for LDAP, RADIUS, and Active Directory are, by default, disabled.