Power Allocation Plan Properties per Managed Device
Table 6-3 System Power Specification Properties (Power Allocation)
Power Metric Property (read-only) | Managed Device | Description |
---|---|---|
Power Supply Maximum ( |
x86 SP |
The Power Supply Maximum property value, shown in Oracle ILOM interfaces, represents the maximum input power wattage that the power supplies are capable of drawing from the power outlets. |
Peak Permitted ( |
x86 SP SPARC SP |
The Peak Permitted property value, shown in Oracle ILOM interfaces, represents the maximum power wattage consumption guaranteed to the managed device. For instance:
Important monitoring considerations:
For further information about budgeting power that is consumed by a managed device, refer to Setting Power Alert Notifications and Managing System Power Usage. |
Allocated Power ( |
x86 SP SPARC SP |
The Allocated Power property value, shown in Oracle ILOM interfaces, represents the maximum input power wattage allocated to a managed device. For example:
|
Target Limit ( |
x86 SP SPARC SP |
The Target Limit property value, shown in Oracle ILOM interfaces, displays the power limit value (wattage or percentage) configured on the server. Important power monitoring considerations:
For more information about power budgeting or instructions for configuring a power limit, refer to Setting Power Alert Notifications and Managing System Power Usage. |
Table 6-4 Per Component Power Map Properties (SP Power Allocation)
Power Metric Property (read-only) | Managed Device | Description |
---|---|---|
Allocated Power ( |
x86 SP SPARC SP |
The Allocated Power property value, shown in Oracle ILOM SP interfaces, represents the total sum of power wattage allocated to either: 1) a server component category (CPUs), or 2) an individual component installed on the server (MB_P0). |
Can be capped |
x86 SP SPARC SP |
A Yes or No property value, per server component, appears in the Oracle ILOM SP web interface to indicate whether a power budget limit can be set for that server component. Note: If power budgeting (Target Limit property) is not supported by the server, the “Can be capped” property will not appear in the Power Management Allocation Plan. For further information about power budgeting, refer to Setting Power Alert Notifications and Managing System Power Usage. |