Modify Default Network Connectivity Settings
Before You Begin
-
This procedure assumes that you have an established local or network management connection to the Oracle ILOM server SP. For instructions on how to establish a physical local or network connection to Oracle ILOM, see Connect to Oracle ILOM.
-
Oracle ILOM is shipped with IPv4 DHCP and IPv6 Stateless default network settings.
When the network property for IPv4 is set to DHCP, the SP automatically configures the DHCP IP address using the DHCP advertisement messages received from the DHCP IPv4 server.
When the auto-configuration property for IPv6 is set to Stateless, the SP automatically configures its dynamic address using the IPv6 router advertisement messages. In addition, the SP always generates a non-routable Link-Local IPv6 address, which allows it to be reachable from its local subnet.
-
You need Admin (a) role privileges to modify network settings in Oracle ILOM.
-
You can modify the server SP network settings in Oracle ILOM using the CLI or web interface.
To modify default network settings on the server SP, perform one of the following:
-
Modify server SP default network settings – Web Procedure 1
-
Modify server SP default network settings – CLI Procedure 2
-
Modify Default Server SP Network Settings – Web Procedure
-
Modify Default Server SP Network Settings – CLI Procedure